Vespa 50 S 2T
All models
Piaggio top case in Montebianco white 544 for Vespa LX/S 50-150ccm/PX2011 125-150ccm
Vespa LX/โS 50-150ccm/โPX2011 125-150ccm
32 l
color white, Montobianco 544
including mounting material, without backrest
Graduated measuring cup for oil mixture 2% scale for liters/gallon without lid
Plastic
Graduated scale for 2% mixture
All Vespa models
universal, 360ยฐ swivel, minimum height: 13cm, maximum: 43cm empty weight: 34kg, load: 400kg
Tin poster with central embossed image.
Dimensions 30x40 cm.
All models
The ignition timing is important for the thermal health of the
engine and for delivering full power. If you rebuild the
engine, you should not rely on existing marks for
ignition adjustment, but measure it personally. This is
easily possible with this electronic timing gun for
gasoline engines with contact or transistor ignition system
(CDI ignition as in series with ET3, PK, PX, PX, Cosa, T5 etc.) 6 and 12-volt ignitions can be adjusted at both 6 and 12 volts. Note:
It doesn't matter if the ignition is 6V or 12V, an external 12-volt power source (e.g. a car battery) is always needed if the
vehicle doesn't already have one.
A super bright xenon tube and a special converging lens ensure optimal visibility of the fixed markers even at speeds over 8000 rpm in the near field.
The gun is connected to a 12-volt battery via the crocodile clips and the inductive clip on the spark plug cable (without direct contact
with the wire)
Carburetor cover "AT design prototypes" KEIHIN -Polini-Dell'Orto
For carburetor:
Keihin PWK 28
Polini PWK 24-26-28-30
Dell'Orto PHBL
Stage 6 PWK 24-26-28
Voca PWK 24-28
Carburetor cover adjustable horizontally and vertically (to avoid abnormal tension on the throttle cable)
Black color. Equipped with touchscreen compatibility and knuckle protection, the Gig Pro gloves are made of genuine leather, feature CE D30 protections, and are CE and Moto CE certified.
- 100% genuine goat leather
- soft D30 inserts on knuckles and palm
- velcro adjustment on the wrist
- EN 13594:2015-CE motorcycle certified
Dark green color. Equipped with touchscreen compatibility and knuckle protection, the Gig Pro gloves are made of genuine leather, feature CE D30 protections, and are CE and Moto CE certified.
- 100% genuine goat leather
- soft D30 inserts on knuckles and palm
- velcro adjustment on the wrist
- Moto certified EN 13594:2015-CE
For windshield models with predisposition for cover mounting
Hole diameter: 30cm
Cloth size: 71x44.5 cm
All models
The ignition timing is important for the thermal health of the
engine and for delivering full power. If you rebuild the
engine, you should not rely on existing marks for ignition
adjustment, but measure it personally. This is
easily possible with this electronic timing gun for
gasoline engines with contact or transistor ignition system
(CDI ignition as in series with ET3, PK, PX, PX, Cosa, T5, etc.) The 6 and 12 volt ignitions can be adjusted at both 6 and 12 volts. Note:
It doesn't matter if the ignition is 6V or 12V, an external 12 Volt power source is always required (e.g. a car battery) if the
vehicle doesn't already have one.
A super bright xenon tube and a special converging lens ensure optimal visibility of the fixed markers even at speeds above 8000 rpm in the near field.
The gun is connected to a 12-volt battery via the crocodile clips and the inductive clip on the spark plug wire (without direct contact with the wire)
Note: For models with a top case and windshield
carburetor PHB/VHST
4-hole model โ 1mm
lamp
Variator rollers MALOSSI HT Roll 19x15.5 mm 7.5 g for Vespa ET2/ET4/LX/LXV/S, 50cc 2T/4T AC/LC
Vespa ET2/ET4/LX/LXV/S, 50ccm 2T/4T AC/LC
HTRoll
HIGH RESISTANCE CALIBRATED ROLLERS
for original variators and Multivar
HTRoll are made of CPT with a specific formula and
have the corresponding weight marked on one side.
HTRoll represent a technical replacement for the original and are
a complete series of calibration elements capable of varying the transmission
ratio of your scooter, perfectly adjusting its speed
and acceleration.
Operation
Due to rotation, the weight of the rollers transforms into centrifugal
force: the greater the weight of the roller, the greater the centrifugal force and
the shorter the shift time, and vice versa.
Variator calibration
To optimize engine performance, use rollers that during
use keep the engine in the maximum power rotation range.
By reducing the weight of the rollers, the engine increases the number of
operating revolutions, conversely, by increasing the weight of the rollers, the
number of revolutions decreases.
Transmission belt X-Special Belt (size 18.5x8x727 mm - angle 30ยฐ) for Vespa ET2/ET4/LX/LXV/S, 50ccm 2T/4T AC/LC
Vespa ET2/ET4/LX/LXV/S, 50cc 2T/4T AC/LC
The X Special Belt V-belts are the best choice to ensure performance and reliability for your scooter.
They are produced with compounds designed to ensure optimal resistance and traction, and their shapes have been fine-tuned to perfectly adhere to the surfaces of the automatic transmission components.
The X Special Belt is not only perfectly interchangeable with the original belt, but it also offers all the advantages of Malossi product quality.
The toy is self-propelled. This means that the "engine" is the driver themselves! This keeps girls and boys very active, while also promoting their neural development of motor and coordination skills.
The main specifications are as follows:
- Product dimensions: 76cm in length, 30cm in width, 43cm in height (handlebar) and 32cm in seat height
- Product weight: 5.9 kg.
- Recommended age: 1-5 years
- Maximum allowed weight: 20 kg (limit due to lack of brakes, not stability or quality).
1 Internal compartment
1 External pocket
Size: 21x25x4 cm
Metal magnet, with Vespa communication graphics.
2.2x2.2cm/ 4.5x2.2cm
M14x1.25, wrench width 20.8mm
shielded/long thread
equivalent to BOSCH W4CS/ DENSO IW24/W24ESG-U/W24ESRZ-U
With mesh inserts, touch screen compatible
Liquid silicone gasket, resistant to glycol. Ideal for flexible flanges. Machined surfaces, metal or plastics. โข The product withstands water and glycol mixtures. โข Excellent for components with high torque capacity. โข Enhanced formula with oil resistance and excellent adhesion. โข 8 times more flexible than cork and/or composite gaskets and 3 times more resistant to oils than conventional silicone gaskets. โข Operating temperature: -54ยฐC to 260ยฐC โข Non-corrosive to sensors present in the engine (such as Lambda and others). โข Low odor. Dries in 40 minutes.
Adjustable shoulder strap with sliding buckle
Size: 25x21x7 cm
Bardahl XTM POLAR PLUS 4-stroke synthetic motor oil 10W-40
Vespa 50/125/150/200/250/300
Formulated for high power multi-cylinder and single-cylinder engines.
Ideal for Hypersport, Sport-tourer & Off-road
High power multi-cylinder and single-cylinder engines
Suitable for engines with both integrated and separate gearbox,
with wet or dry clutches.
Properties and technology of the XTM POLARPLUS range
The use of selected synthetic bases and special polymers (Radial
Polymer Structure) with high resistance, allows the lubricants of the
XTM range to maintain the correct oil viscosity over a wide range
of temperatures, ensuring effective lubrication even
in the most demanding driving and lubrication conditions.
Product Plus MCO Tailored Chemistry - developed
specifically for motorcycle applications and enriched with Bardahl Polar
Plus + Fullerene C60
Formulated with special high resistance polymers Radial Polymer Structure with high Shear Stability
Prevents deposit formation ensuring maximum engine cleanliness
Ensures maximum lubrication efficiency even in the most demanding use
Allows maximizing engine performance
Advanced Synthetic Blend.
O-ring and various dismantling tip tool kit for all models
All Vespa models
Different inclinations
Vespa 50/125/150/200/250/300 ET2/ET4/LX/LXV/S
/Primavera/Sprint/946/GTS
/GTS Super/GTV/GT 60/GT/GT L
Medium strength threadlocker "LOCTITE 243" locks nuts, screws, bolts, studs (10ml)
All models
Outdoor scooter-vespa cover, breathable and waterproof fabric in white color
all models
Made with the most compact and lightweight shell in the category, among its
main features are the removable neck roll with zipper
and the rear goggle strap holder for storing helmet goggles.
The 104 is produced without a visor or peak, its compact size allows
easy storage in all scooter under-seat compartments.
Triple compartment
Padded shoulder straps
Dimensions: 40x30x16 cm
Originally, authorized workshops proudly displayed an enamel sign with the 'Vespa Servizio' logo.
The same sign is now being reintroduced to be hung: metal shell, printed graphics, and LED light.
Dimensions: diameter 14cm Power: 12VPlug: EU AC/DC adapterAccessories: 1200 mm cable,
Vespa Poster 70x100
Vespa 50/125/150/250/300
Fixing--> Self-adhesive
Measurements--> 43.5x35 mm