Vespa 200
Vespa 90SS - 90 Racer - 125 Primavera VMA1>2T - 125 Primavera ET3 VMB1T - Vespa 125 Super VNC1T - Vespa 125 GTR VNL2T - Vespa 125 TS VNL3T - Vespa 150 Super VBC1T - Vespa 150 Sprint Veloce VLB1T - Vespa 180 Rally VSD1T - Vespa 200 Rally VSE1T
Note: Complete with wiring and tapered contact
Wiring for angled speedometer for Vespa 125/150/200 PX 2nd series Arcobaleno
Vespa PX Arcobaleno Vespa PE Arcobaleno
Carburetor-air filter, crankcase-air filter gasket pair in aramid for Vespa 125 VNB-TS/150 VBA-Super/Rally/PX80-200/PE/Lusso/T5
125 VNB-TS/150 VBA-Super/Rally/PX80-200/PE/Lusso/T5
In aramid
2 Pcs.
Pair of BGM Pro silent blocks engine crossbar - MEDIUM - for Vespa PX200/Rally 200 (VSE1T) (2nd series)
Vespa 125 PX T5 VNX5T
Vespa PX rainbow series
Vespa 200 Rally 0040654 >
Vespa 200 PE VSX1T
Reinforced silent blocks for greater driving stability, mount dry (at most using talcum powder to help).
ATTENTION--> Directional silent blocks, they must be mounted according to the direction of travel in the following way: Left direction of travel: red mark, right direction of travel: green mark.
Front shock absorber buffer kit BGM PRO (2 Pcs) for Vespa 80/125/150/200 PX-PE
Vespa PX (all)
Vespa PE (all)
Vespa 50 PK XL Rush
Vespa 125 PK
BGM PRO silent tires in polyurethane. Much narrower than the original tires, they minimize self-movement. The damping thus works more defined and precise. The vehicle appears much narrower, the shutters respond faster.
The set contains the two tires for the front axle shock absorber. The
tires are located on the shock absorber and are mounted both above and below
the screwed metal fixing plate of the front fork. They replace the standard silent tires 1:1 without further modifications.
ASSEMBLY
The larger rubber is first pushed onto the upper end
of the shock absorber. The smaller rubber is located on the top
of the mounting plate. The large washer is then placed above the support plate and secured with a serrated washer and a nut. Torque for the upper nut 30-40 Nm.
Just swap the rubber with the original ones, ready.
Cross type with thread for Vespa 125/150/200 Sprint v-TS-PX-PE-Rally
Vespa 125 GT VNL1>2T 78301>
Vespa 125 GTR VNL2T 124014>
Vespa 125 TS VNL3T
Vespa 125 PX VNX1T>2T > 232052
Vespa 150 Super VBC1T 181687>
Vespa 150 Sprint VLB1T 1.170240>
Vespa 150 Sprint Veloce VLB1T 0169301>
Vespa 150 PX VLX1T > 624301
Vespa 180 Rally VSD1T 0026849>
Vespa 200 Rally VSE1T 004476>
Vespa 200 PE VSX1T > 315266
Material: 40 NI Cr Mo 15 (Sim. Piaggio)
Faucet control rod for Vespa 200 Rally/P80-150X/P200E/PX80-200E/Lusso/P150S adaptable to Vespa PK50-125/S/SS/XL/Rush/ETS
Vespa PX (all)
Vespa PE (all)
Vespa 200 Rally VSE1T
Vespa PK
Rod length: 165 mm, Plastic knob
Base gasket for speedometer for Vespa 50-90/SR/SS/125 PV/ET3/Super/GTR/TS/150 Super/SprintV/Rally
Vespa 50 SS V5SS1>2T, Vespa 90 SS V9SS1T, Vespa 125 Primavera VMA1T>2T, Vespa 125 Super VNC1T, Vespa 125 GTR VNL2T, Vespa 125 TS VNL3T, Vespa 150 Sprint Veloce VLB1T, Vespa 180 Rally VSD1T, Vespa 200 Rally VSE1T
Front hub flat spacer washer for Vespa PK/S/XL/XL2/PX80 -200E/Lusso/'98/MY/T5
Vespa PK/S/ XL/XL2/PX80 -200E/Lusso/`98/MY/T5
Size: Ø 36.5x22 mm
Orig.Ref: 177445
Inner roller bearing drum 20x26x16 mm for Vespa PK/S/XL/XL2/PX80-200E/Lusso/'98/MY/T5/Cosa/LML Star 125-200 2T/4T/Deluxe 2T/4S
Vespa PX 125 VNX2T 1116>
Vespa PX 150 VLX1T 346431>
Vespa P200E VSX1T 112625>
20X16X26 mm
The 4 seasons helmet is ideal for tackling the hotter seasons thanks to the large shell vents that ensure air circulation inside the helmet, and at the same time, it is also effective in adverse conditions thanks to the long external visor and the special covers for the vents provided. The 116 AIR is made in two sizes of outer shell in HPT (High Performance Terpolymer) and with four internal shells in multi-density EPS. It also features a retractable internal sun visor, thermoformed interiors, cheek pads, and chin strap made with easily removable and washable hypoallergenic and antibacterial fabric. The equipment is completed by the micrometric buckle, the anti-theft ring on the strap, and the strap holder elastic.
Inspired by the classic Italian style that has always distinguished us, the 191 PIX is an extremely compact and lightweight demi-jet. It differs from the traditional spherical helmet thanks to the front metal air intakes and the rear shell cuts that also house the air extractors. The thermoformed interiors, completely removable and washable, are equipped with a removable chin guard and neck collar with a zipper and, in all graphic variants, embellished with vintage-style brown eco-leather details. The PIX can be equipped with a long visor for greater wind protection or with a modern-shaped visor, the interchangeable visors share the fastening system which, in the graphic versions, is in metal. The helmet's equipment is completed by the micrometric buckle, the anti-theft ring, the strap holder elastic and, in the graphic variants, the rear goggle strap holder.
ECE-R 22.06 APPROVAL
SIZES: XS (54cm), S (55cm), M (56cm), L (57cm), SIZES: XL (58cm), XXL (59cm)
AVERAGE WEIGHT SIZE M: 1050 +/- 50 gr2 OUTER SHELL SIZES2 EPS SIZESHELL IN HPTAIR STREAM SYSTEMINTERCHANGEABLE VISORSREMOVABLE INTERIORREMOVABLE CHEEK PADSREMOVABLE CHIN GUARDREMOVABLE NECK ROLLQUICK RELEASE BUCKLEGOGGLE STRAPANTI-THEFT RING ON STRAPSTRAP HOLDER ELASTIC
Nut and washer clutch assembly BGM PRO for Vespa PX, Rally180 (VSD1T), Rally200 (VSE1T), Sprint, T5 125cc, Cosa1
Vespa 125 (all except Primavera ET3)
Vespa 150
Vespa 160
Vespa 180
Vespa 200
M12 x 1.50 collar Ø:18.6mm h:9mm
key opening:15
Complete crankshaft for Vespa 200 PE VSX1T-Rally Ducati ignition
Vespa 200 PE
Vespa 200 rally VSE1T 0033996>
Roller cage
Complete
Carbon hubcap CARBON ITALY for Vespa 125/150/200 PX-PE-Arcobaleno
Vespa PX 125 VNX2T 1116> PX 150 VLX1T 346431> P200E VSX1T 112625>
In carbon
All models
Made of real carbon, length 10cm, height 3cm, thickness 1.5mm, usable as a keychain or to apply on the shield of your Vespa
Oil can support - luggage rack for internal shield -RDV- Vespa Smallframe, Largeframe 10 inches - to be mounted on the thread for the front spare wheel support - left side
All models
Measurements---> L 13.5 cm H18.5 cm
SIP Touren 2.0 Magnet Flywheel (1.5 kg) for Vespa PK50-125/S/ET3
Vespa PX
Vespa PE
Vespa PK
Lamp 9/32V Mega-LED 2 BA20D 680 lm with built-in resistor
Jaw holder plate for Vespa 80/125/150/200 PX-PE 2nd series pin Ø 20 mm- PK50-125/S/SS/XL/XL2/Automatic
Vespa 80/125/150/200 PX-PE 2nd series pin Ø 20 mm
Vespa 125 PX E VNX2T 1115>
Vespa 150 PX E VLX1T 346430>
Vespa 200 PX E VSX1T 112624>
Vespa PK50-125/S/SS/XL/XL2/Automatic
Galvanized brackets for fixing canister/bag on platform for Vespa 125/150/160/180/200
All models
SIP ROAD XL Viper Box Racing Exhaust by Nordspeed for Vespa 200 Rally/P200E/PX200 E/Lusso/'98/MY/Cosa 200
Vespa 200 PX-PE
The advantages of the 'Viper Box' in summary:
- Wide power band
- High maximum power.
- Greater tilt angle/intelligently directed.
- Good thermal properties.
The "Viper Box" operates optimally when the cylinder opening times are adjusted to fit its elaborate layout. A transfer port timing of: 130° -136°, an exhaust port timing of: 190° -196°, and a blowdown timing of 30° -32° is recommended.
Vespa 125 VNB1T 032100 >
Vespa 125 VNB2T>6T
Vespa 125 Super VNC1T
Vespa 125 GT VNL1>2T
Vespa 125 GTR VNL2T
Vespa 150 VBA1T 112180 >
Vespa 150 VBB1>2T
Vespa 150 Super VBC1T
Vespa 150 GL VLA1T
Vespa 150 Sprint VLB1T
Vespa 150 Sprint Veloce VLB1T
Vespa 150 GS (Adaptable-Adapdable)
Vespa 160 GS VSB1T (Adaptable-Adapdable)
Vespa 180 Rally VSD1T
Vespa 180 SS VSC1T (Adaptable-Adapdable)
Vespa 200 Rally VSE1T
Included Base Gasket
Complete strip kit for platform for Vespa 80/125/150/200 PX-PE 1st Series
Vespa 80 PX V8X1T >30160
Vespa 125 PX VNX1T
Vespa 125 PX VNX2T >44000
Vespa 150 PX VLX1T >410580
Vespa 200 PE VSX1T >138292
2.5X13.8mm
Chrome fan cover for Vespa 80/125/150/200 PX-PE without electric start
Vespa PX
Vespa PE
In chrome-plated metal
Pair of light and indicator bulbs for Vespa P80-150X/PX80-200E/P200E
Vespa PX until 1983
Vespa PE until 1983
Complete with Lamps and lamp holders
Green and Orange
Rear wheel drum FA Italia (30 mm oil seal) for Vespa 125/150/200 PX Arcobaleno/adaptable to LML
Vespa PX Rainbow
Vespa PE Rainbow
Hub oil seal fitting diameter: 30 mm
Pinasco high-speed crankshaft bearing (oversized +0.04mm) for Vespa 125/150 VM-VN-VNA-GT-GL-TS-VL-VBA-VBB-VB1-Sprint-PX
Vespa 125 from 1953
Vespa 150 from 1954
Vespa 160
Vespa 180
Vespa PX
Vespa PE
Dimensions: 25x62x12 mm
Vespa 50 V5A1T N,L,R
Vespa 50 Special V5A2>3T
Vespa 50 Special V5B1>4T
plastic
blue
for the safe maintenance of candles <- Ø 18mm
Light brown wicker storage basket with lid -47x31x25cm- scooter, vespa, mopeds
All Models / Tutti i modelli
Vespa 125/150/200 PX-PE
Gear pre-selector with neutral indicator light for Vespa Cosa 125-200/ PX America
Vespa Cosa 125-200/ PX America
All Models / All Models
Note: Soft type
Measurements: Diameter 7 mm, length 58 cm
our codes:
Symmetrical double light bulb 12V 25/25W socket: BA20d for Vespa 125/150/180/200 VNB-TS-Sprint-Rally/APE TM 602 703
Socket: ba20d