Vespa 200
Preloaded M8 Washers MD Racing (4pcs) for Vespa 200 PE-Rally-Cosa Studs
Vespa 200 PE-Rally-Thing
Special kit of harmonic steel washers with preload
specifically to compensate for the play due to thermal excursions of Vespa cylinder studs.
These washers are fully compressed at 2 kgm (20 N/m)
(tightening of Vespa studs) which usually falls within the
Piaggio guidelines between 1.7 and 2.2 Kgm
and compensates for the loosening of the studs subjected to heating and elongation.
Dimensions:
internal diameter 8.4 mm
external diameter 18 mm
thickness 2 mm
washer height at rest on average 2.4 mm
average excursion 0.4 mm
BGM PRO BigBox SPORT V2 (BBS2) Exhaust for Vespa 200 Rally/P200E/PX200 E/Lusso/'98/MY/Cosa 200
Vespa 200 PX-PE
BGM BigBox Sport V2 for Vespa PX200
Performance like a racing exhaust - appearance like a stock exhaust
The BGM BigBox Sport V2 is a purebred racing exhaust for Vespa, in the unsuspecting design of an original exhaust. It stands as a clear alternative to large and flashy resonance exhaust systems. The high level of performance clearly distinguishes the BBS2 from other exhaust systems. Designed for performance-oriented drivers who appreciate the benefits of a low-profile vehicle.
NEW BBS V2
The basic concept has been maintained and only adapted to the greater requirements due to the increased power and engine displacement. The BGM BBS2 (=Big Box Sport V2) has widened pipe sections both inside the box and in the exhaust area. This effectively prevents the power fade that often occurs with very powerful engines (over 30 HP).
Additionally, the often-criticized ground clearance of the manifold has been modified. The system is now fully suitable for daily use and has the same ground clearance as a comparable resonance exhaust. Like the Big Box Touring V2, the BBS2 is now also equipped with a connection between the manifold and the exhaust body.
REQUIREMENTS
All models /All Models
Diameter: 1.2 mm
Length: 2000 mm
Barrel: 2.8x3 mm
High-speed Pinasco crankshaft bearing kit for Vespa 125/150/200 GTR-TS-PX-Super-Sprint Veloce
Vespa 125 GTR VNL2T 145901>
Vespa 125 PX
Vespa 125 TS VNL3T 18139>
Vespa 150 Super VBC1T 412374>
Vespa 150 Sprint Veloce VLB1T 0294260>
Vespa 150 PX
Vespa 200 PE
Flywheel side: 25x38x15
Clutch side: 25x62x12
Vespa 50 V5A1T N,L,R, Vespa 50 Special V5A2>3T, Vespa 50 Special V5B1>4T, Vespa 90 V9A1T, Vespa 125 Primavera VMA1T>2T, Vespa 125 Primavera ET3 VMB1T, Vespa 125 PX, Vespa 150 PX, Vespa 200 PX, Vespa PX Arcobaleno
Rear Shock Absorber Classic Line
ADJUSTMENT
Spring preload with single ring, continuously adjustable, made with the best aluminum alloys available on the market. The radial holes on the ring allow, using the practical key provided, to quickly and easily modify the set-up.
Vespa 80 PX
Vespa 125 PX
Vespa 150 PX
Vespa 200 PE
Vespa Rainbow
Front shock absorber Classic line,
Adjustments: Single ring spring preload, continuously adjustable, made
with the best aluminum alloys available on the market. The radial holes
on the ring allow, using the practical key provided, to quickly and easily modify the set-up.
Oil level inspection cup gasket for Vespa PX Lusso/T5/Rally with mixer
Vespa PX Rainbow
Complete Teflon Coated Transmission Kit for Vespa 125/150/200 PX Arcobaleno
Vespa PX Rainbow
Kit composed of pre-cut sleeves and wires for front brake, rear brake, gear, clutch, starter, throttle
Mirror support bracket on the handlebar in galvanized metal (LH)
Vespa 50
Vespa 90
Vespa 125
Vespa 150
Vespa 180
Vespa 200
Including hardware
Complete starter transmission for Vespa 125/150/180/200 GT-GTR-TS-VNB-PX-VBB-VBA-Sprint-Super-GL-GS-Rally
Vespa 125 VNB2>6T
Vespa 125 Super VNC1T
Vespa 125 GT VNL1>2T
Vespa 125 GTR VNL2T
Vespa 125 TS VNL3T
Vespa 125 PX VNX1>2T
Vespa 150 VBB1>2T
Vespa 150 Super VBC1T
Vespa 150 GL VGLB1T
Vespa 150 Sprint VLB1T
Vespa 150 Sprint Veloce VLB1T
Vespa 150 PX VLX1T
Vespa 180 Rally VSD1T
Vespa 200 Rally VSE1T
Vespa 200 PE VSX1T
Only for models WITHOUT automatic mixer
All models / All models
Diameter: 1.6 mm
Length: 2000 mm
Barrel: 6x7 mm
Low tension pick-up screw/gear preselector cover small M5x40 mm for Vespa PX/T5/V50/PV/ET3/PK/S/XL
Vespa PX/T5: low voltage socket
V50/PV/ET3/PK/S/XL: gear selector cover
For PWK/PHBL/VHST carburetors
Black color. Equipped with touchscreen compatibility and knuckle protection, the Gig Pro gloves are made of genuine leather, feature CE D30 protections, and are CE and Moto CE certified.
- 100% genuine goat leather
- soft D30 inserts on knuckles and palm
- velcro adjustment on the wrist
- EN 13594:2015-CE motorcycle certified
Dark green color. Equipped with touchscreen compatibility and knuckle protection, the Gig Pro gloves are made of genuine leather, feature CE D30 protections, and are CE and Moto CE certified.
- 100% genuine goat leather
- soft D30 inserts on knuckles and palm
- velcro adjustment on the wrist
- Moto certified EN 13594:2015-CE
For windshield models with predisposition for cover mounting
Hole diameter: 30cm
Cloth size: 71x44.5 cm
The toy is self-propelled. This means that the "engine" is the driver themselves! This keeps girls and boys very active while also promoting their neural development of motor and coordination skills.
The main specifications are as follows:
- Product dimensions: 76cm length, 30cm width, 43cm height (handlebar) and 32cm seat height
- Product weight: 5.9 kg.
- Recommended age: 1-5 years
- Maximum allowed weight: 20 kg (limit due to lack of brakes, not stability or quality).
ABUS "uGrip BORDO 5700" folding lock in lime color for all models with disc brakes
5 mm steel bars
Colors matched to the closure body
(only "core" colors) The bars are connected with special rivets Automatic Premium Cylinder
The "convenient transport mode" (CTM) system allows for immediate use of the device (only on 5700/100)
Complete original Siem headlight for Vespa 125/150/180 GTR-TS-Sprint V-Rally
Vespa 125 GTR VNL2T
Vespa 125 TS VNL3T
Vespa 150 Sprint 0118590 >
Vespa 150 Sprint Veloce VLB1T
Vespa 180 Rally
Gray roof, without gasket
Vespa 50
Vespa 90
Vespa 125
Vespa 150
Vespa 180
Vespa 200
Galvanized
12 V 9 AH MAINTENANCE-FREE BATTERY for Vespa 125/150/200 PX-PE-Arcobaleno
Vespa P 80 V8A1T
Vespa PX 80 E V8X1T
Vespa PX disc brake
Vespa PX Rainbow
Vespa PE Rainbow
Dimensions-->132x72x138 mm
No maintenance required
Comparison--> Bosch M4F25, code YB9-B.
The battery comes with a device containing pre-dosed acid for a safe initial filling: it is therefore quickly ready for use and everything is included.
Original Piaggio brake pump GRIMECA/HENG TONG disc brake for Vespa 125/150/200 PX disc brake
Vespa PX Arcobaleno disc brake
Ø 12 mm
with screw fastening
Vespa 125/150/200 PX-PE
Black background, scaled to 120 KM/H
Vespa 50/90/125/150/180/200
Rearview mirror for classic motorcycles, high quality
Aluminum shell
Package: Left
Color: Chrome
Dimensions: Length 240 mm; height 250 mm
Barrel attachment M8 right and 10 x 1.25 right
Rearview mirror in black plastic (LH/RH) for Vespa 50/90/125/150/180/200
Vespa 50/90/125/150/180/200
Universal Reclining
You can mount this rearview mirror on either the right or left side, facing up or down.
Sold individually Package: Left / Right
Color: black
Adjustable rod Length from 0 to 100 mm.
Included Kit: M8-M8 left; 10×1.25; 10 x 1.25 left
All models
The ignition timing is important for the thermal health of the
engine and for delivering full power. If you rebuild the
engine, you should not rely on existing marks for ignition
adjustment, but measure it personally. This is
easily possible with this electronic timing gun for
gasoline engines with contact or transistor ignition system
(CDI ignition as in series with ET3, PK, PX, PX, Cosa, T5, etc.) The 6 and 12 volt ignitions can be adjusted at both 6 and 12 volts. Note:
It doesn't matter if the ignition is 6V or 12V, an external 12 Volt power source is always required (e.g. a car battery) if the
vehicle doesn't already have one.
A super bright xenon tube and a special converging lens ensure optimal visibility of the fixed markers even at speeds above 8000 rpm in the near field.
The gun is connected to a 12-volt battery via the crocodile clips and the inductive clip on the spark plug wire (without direct contact with the wire)
Vespa 125 Primavera ET3 VMB1T
Vespa 200 Rally VSE1T
3 positions
Chromed
Note: For models with a top case and windshield
Spacer Washer for gear/accelerator control tube Ø 31x24x1 mm for Vespa PX/T5/V50 R/S/Special/90/100/PV/ET3/PK/S/XL/Automatic
Vespa 50/90/125/150/200
Dimensions-->31x24x1mm
Vespa 50 PK XL V5X3T
Vespa 125 PK XL VMX6T
Vespa 125 PX Arcobaleno VNX2T 200001>
Vespa 150 PX Arcobaleno VLX1T 600001>
Vespa 200 PE Arcobaleno VSX1T 300001>
carburetor PHB/VHST
4-hole model ⌀ 1mm
SIP handlebar mirror mounting kit without counterweights for Vespa 125/200/300 GTS-GT-GTS Super
Vespa 125/150/300 GTS-GTS Super from 2014
Rear brake cable without eyelet for Vespa 50 N/L/R/90/125/Primavera/ET3/VNA/VNB/GT/GTR/TS/150 VBA/VBB/GL/Sprint/Super/160 GS/180 SS/Rally/200 Rally
Vespa 50 V5A1T N/L/R > 922304
Vespa 50 Special V5B3T >306417
Vespa 125 Primavera VMA1T>2T > 0199798
Vespa 125 VNA1T > VNA2T
Vespa 125 VNB1T > VNB6T
Vespa 125 Super VNC1T
Vespa 125 GT VNL1>2T
Vespa 125 TS VNL3T
Vespa 125 GTR VNL2T
Vespa 150 VBB1T >VBB2T
Vespa 150 Super VBC1T
Vespa 150 VBA1T
Vespa 150 Sprint VLB1T
Vespa 150 Sprint Veloce VLB1T
Vespa 150 GL VLA1T
Vespa 160 GS VSB1T
Vespa 180 SS VSC1T
V
Measurements: Diam. 2.5x900 mm
lamp
BGM Pro clutch bush for Vespa PX, T5 125cc, Cosa, Rally, TS, Sprint, GT, GTR, SS180, GS160 / GS4, GL, Super, VNA, VNB, VBA, VBB
Vespa 125 (Excluding primavera ET3)
Vespa 150
Vespa 160
Vespa 180
Vespa 200
All models / All Models
High-quality material ensures a very smooth sliding operation in all conditions.
Vespa 50 V5B1>3T
Vespa 50 V5SS1>2T
Vespa 50 PK
Vespa 90 V9A1T
Vespa 125 Primavera VMA1T>2T
Vespa 125 Primavera ET3 VMB1T
Vespa 125 GT VNL2T
Vespa 125 GTR VNL2T
Vespa 125 TS VNL3T
Vespa 150 GS VS5T 0047351>
Vespa 150 GL VLA1T
Vespa 150 Sprint VLB1T
Vespa 150 Sprint Veloce VLB1T
Vespa 160 GS VSB1T
Vespa 180 SS VSCT
Vespa 180 Rally VSD1T
Vespa 200 Rally VSE1T
Vespa PX
Vespa PE
Included: Chrome nuts and valve