Vespa 200
Thing 125 VNR1T 0001001>
Thing 125 VNR1T 3000001>
Thing 2 125 VNR2T 1001>
Thing 150 VLR1T 0001001>
Thing 150 VLR1T 3000001>
Thing 2 150 VLR2T 1001>
Thing 200 VSR1T 0001001>
Thing 200 VSR1T 3000001>
Thing 200 VSR1T 3016725>
Vespa Cosa
Complete electrical system Grabor for Vespa P125-150X/PX125-200E/ 1°/P200E
Vespa 125 PX VNX1T
Vespa 150 PX VLX1T >346402
Vespa 200 PE VSX1T
Vespa 200 Rally VSE1T 0033997>Ducati Unit (Adaptable)
For models without arrows
Vespa 200 PX, Vespa 200 rally VSE1T, Ape MP, Ape 175
Size: 16x20x20 mm
Custom kickstart pedal in chrome-plated steel for Vespa PX80-200/PE/Lusso/`98/MY/`11 /Cosa
Vespa 125 PX
Vespa 150 PX
Vespa 200 PE
Gear selector rod for Vespa 125/150/180/200 GT-GTR-Sprint-GL-PX 1st-Rally
Vespa 125 GT VNL2T
Vespa 125 Super VNC1T
Vespa 125 GTR VNL2T
Vespa 150 Sprint VLB1T
Vespa 150 Super VBC1T
Vespa 150 Sprint Veloce VLB1T
Vespa 180 Rally VSD1T
Vespa 200 Rally VSE1T
Vespa PX
Vespa PE
Speedometer transmission fixing hood for Vespa 125/150 VNB/GT/GTR/TS-VBA/VBB/GL/Sprint
All models / Tutti i modelli
Vespa 125 PX VNX2T> 200000, Vespa 150 PX VLX1T 345649> 600000, Vespa 200 PE VSX1T> 300000
For vehicles without indicators, With ON/OFF key switch
Tachometer/odometer SIP TACHO KARACHO for Vespa P80-150X /PX80-200E/Lusso 1°/P150S /P200E - 160 (km/h/mph) / 16,000 (Umin/rpm)
Vespa 125/150/200 PX-PE
The SIP TACHO KARACHO is a tachometer with a SIP PERFORMANCE rev counter for Vespa PX80-200 E Lusso/'98/MY/'11, also suitable for Vespa GTV/GT 60 from 125 to 300 cc.
Since their introduction in 2010, SIP tachometers with a speedometer have radically changed the market. Functions that were previously only achievable through the installation of numerous additional devices have now been combined into one instrument, and discreetly.
Available in 100 MpH and 160 km/h versions
Racing optics
Analog and digital display possible
The "Tacho Karacho" version, with the needle hanging at 6 o'clock, is reminiscent of the instruments of sports and racing cars from the '60s and '70s. Besides RPM and speed, this speedometer can also display temperature. It offers the ability to easily switch from AF to EGT connection in the menu.
A small push button allows an elegant switch between different displays. It can be mounted discreetly above or below the light switch. A little extra treat: every time you start the engine, the rev
Vespa P200E VSX1T ->160000
145x20 mm
plastic
black/white aluminum
SIP tubeless aluminum rim in white color 2.10/10 for Vespa 50-125/PV/ET3/PK/S/XL/XL2/125 GT-TS/150 GL/GS VS5T/Sprint/V/T4/Rally/PX/PE/Lusso/T5/LML Star/DLX/Deluxe 2T/4T
Vespa 50/80/90/125/150/160/180/200
Measure--> 2.10-10" with pre-mounted valve
Carburetor cover "AT design prototypes" for PHBH 28/30 carburetor
for PHBH 28/30 carburetor
Vespa COSA 125/200
Vespa 50 V5A1T N,L,R
Vespa 50 Special V5A2>3T
Vespa 50 Special V5B1>4T
plastic
black
for the safe maintenance of candles <- Ø 18mm
Children's electric Vespa GTS 300 Super 12V scooter in red color
l=1020 mm
l=500 mm
a=750 mm
red
with battery
1 speed stage (2 km/h) / forward-stop-reverse switch
l=1020 mm
l=500 mm
a=750 mm
white
with battery
1 speed stage (2 km/h) / forward-stop-reverse switch
Flywheel side crankshaft oil seal "ROLF" 24X35X6 mm for Vespa 125/150/200 PX
Vespa PX/PE
Vespa ETS
Ref.Orig: 158962
Perforated bowl kit MD Racing (7 pieces) in c40 for Vespa 200 Rally-PE-Cosa
Vespa 200 Rally-PE-Cosa
Compared to commercially printed glasses, the MD racing glass has a constant thickness of 1mm across the entire profile.
This solution minimizes the risk of the bottom breaking under the strong pressure of the spring, which would cause the spring to come out with obvious damage to the engine.
VHSH carburetor
VHSH carburetor
All models
The ignition timing is important for the thermal health of the
engine and for delivering all the power. If the
engine is rebuilt, you should not rely on existing marks for
ignition adjustment, but measure it personally. This is
easily possible with this electronic timing gun for
gasoline engines with contact or transistor ignition system
(CDI ignition as in series with ET3, PK, PX, PX, Cosa, T5, etc.) The 6 and 12 volt ignitions can be adjusted at both 6 and 12 volts. Note:
It doesn't matter if the ignition is 6V or 12V, an external 12 Volt power source (e.g., a car battery) is always needed if the
vehicle doesn't already have one.
A super bright xenon tube and a special converging lens ensure optimal visibility of fixed markers even at speeds over 8000 rpm in the near field.
The gun is connected to a 12 volt battery via the alligator clips and the inductive clip on the spark plug cable (without direct contact with the wire)
Vespa 50/80/90/125/150/180/200
round
Ø 110 mm
chrome
bar length: 85mm
thread: M10
glass adjustable from the inside with approval mark and
Decomposable "RUSH" Aluminum Rim in Black 2.10/10 for Vespa 50-125/PV/ET3/PK/S/XL/XL2/125 GT-TS/150 GL/GS VS5T/Sprint/V/T4/Rally/PX/PE
Vespa 50 V5B1>3T
Vespa 50 V5SS1>2T
Vespa 50 PK
Vespa 90 V9A1T
Vespa 125 Primavera VMA1T>2T
Vespa 125 Primavera ET3 VMB1T
Vespa 125 GT VNL2T
Vespa 125 GTR VNL2T
Vespa 125 TS VNL3T
Vespa 150 GS VS5T 0047351>
Vespa 150 GL VLA1T
Vespa 150 Sprint VLB1T
Vespa 150 Sprint Veloce VLB1T
Vespa 160 GS VSB1T
Vespa 180 SS VSCT
Vespa 180 Rally VSD1T
Vespa 200 Rally VSE1T
Vespa PX
Vespa PE
Included: Chrome nuts and valve
O-ring kit for tubeless rim closure
Dimensions: 2.10x10''
All models
Graduated measuring cup for oil mixture 2% scale for liters/gallon without lid
Plastic
Graduated scale for 2% mixture
Tutti i modelli
Size: 7x12 mm
Vespa 200 PX Elestart
Compatible with our article: 02-CX-009-FA
Vespa 200 Rally VSE1T
Vespa 180 Rally VSD1T
Vespa 200 Rally VSE1T
All Vespa models
universal, 360° swivel, minimum height: 13cm, maximum: 43cm empty weight: 34kg, load: 400kg
Tin poster with central embossed image.
Dimensions 30x40 cm.
Flywheel puller tool M28x1 for Vespa 50-125/PV/ET3/PK50-125/S/XL/XL2/125 GT-TS/150 GL-Super/200 Rally/PX80-200/PE/Lusso/'98/MY/'11/T5/Cosa
Vespa 50
Vespa 50 PK
Vespa 125 PK/S/XL/
Vespa 125 ET3
Vespa 125 GT/TS
Vespa 150 GL/Super
Vespa 180/200 Rally
Vespa PX/PE/T5/Cosa
Size: 28x1
All models
The ignition timing is important for the thermal health of the
engine and for delivering full power. If you rebuild the
engine, you should not rely on existing marks for
ignition adjustment, but measure it personally. This is
easily possible with this electronic timing gun for
gasoline engines with contact or transistor ignition system
(CDI ignition as in series with ET3, PK, PX, PX, Cosa, T5 etc.) 6 and 12-volt ignitions can be adjusted at both 6 and 12 volts. Note:
It doesn't matter if the ignition is 6V or 12V, an external 12-volt power source (e.g. a car battery) is always needed if the
vehicle doesn't already have one.
A super bright xenon tube and a special converging lens ensure optimal visibility of the fixed markers even at speeds over 8000 rpm in the near field.
The gun is connected to a 12-volt battery via the crocodile clips and the inductive clip on the spark plug cable (without direct contact
with the wire)
Complete raw top case for Vespa 125/150/200 PX Arcobaleno-T5-Millenium-Disc brake
Vespa PX Rainbow
Vespa PE Rainbow
Included: Black gasket and lock with two keys.
Carburetor cover "AT design prototypes" KEIHIN -Polini-Dell'Orto
For carburetor:
Keihin PWK 28
Polini PWK 24-26-28-30
Dell'Orto PHBL
Stage 6 PWK 24-26-28
Voca PWK 24-28
Carburetor cover adjustable horizontally and vertically (to avoid abnormal tension on the throttle cable)
Custom chrome left rearview mirror for Vespa 50/90/125/150/180/200
Vespa 50/90/125/150/180/200
Universal racing handlebar
Package: Left
Color: Chrome
Dimensions: length 170 mm; height 155 mm
Mirror: length 145 mm; height 44 mm
Included kit: M8 -M8 left; 10 x 1.25; 10 x 1.25 left
Roller bearing gearbox shaft MALOSSI 29x35x13 mm for Vespa 125 GT 2°/GTR/Super 2°/TS/150 GL 2°/Sprint 2°/V/Super 2°/Rally/PX80-200/PE/Lusso/T5/Cosa
Vespa 125 Super VNC1T 024900>
Vespa 125 GT VNL1T 60900>
Vespa 125 GTR VNL2T
Vespa 125 TS VNL3T
Vespa 125 PX VNX1>2T
Vespa 125 PX T5
Vespa 150 Super VBC1T 70200>
Vespa 150 Sprint VLB1T 73900>
Vespa 150 Sprint Veloce VLB1T
Vespa 150 PX VLX1T
Vespa 180 Rally VSD1T
Vespa 200 Rally VSE1T
Vespa 200 PE VSX1T
Measurements: 29x35x13 mm
Vespa 200 Rally VSD1T
Black color stickers