Vespa 160
Vespa 160 GS VSB1T
To be cut
Ø 31.5 mm
incl. sphere and 2 brake pistons
Dell'Orto PHBL Ø 24 carburetor with Parmakit filter calibrated for thermal group CCcorsa Vespa 50/90/125/150/200 Special-GT-GTR-TS-PX-GL-ET3
Adaptable to all models / All Models
Attention---> Calibration set for 160 and 175cc CCcorsa cylinder. (slide, needle, main jet)
Select the displacement in the dropdown menu to receive the correctly set carburetor.
Wheel rim for Vespa 125/150/200 GT-GTR-TS-GS-GL-Sprint-Sprint Veloce-Rally-PX
Vespa 125 GT VNL2T
Vespa 125 GTR VNL2T
Vespa 125 TS VNL3T
Vespa 150 GS VS1>5T
Vespa 150 GL VLA1T
Vespa 150 Sprint VLB1T
Vespa 150 Sprint Veloce VLB1T
Vespa 180 Rally VSD1T
Vespa 200 Rally VSE1T
Vespa PX
Vespa PE
Color Black
Included: M 8 nuts and grower washers 3.50/10
Sheet thickness as Original
Made from soft cotton, it protects against headwinds also thanks to the drawstring that allows for easy and quick adjustment. Imaginative Vespa print with Vespa® logo on a grey or blue base.
All models
Containers made of steel, 0.8 mm thick, plasma welded.
Powder coating
Vespa 150 VB1T
Vespa 150 VBA1T
Vespa 150 VBB1T > VBB2T
Vespa 125 VNB3T > VNB6T
Vespa 150 GS VS2T > VS5T
Vespa GS 160 VSB1T
Vespa 150 GL VGL1T
Vespa 150 GL VGLA1T
Vespa 150 GL VGLB1T
Diameter: 22 mm
Color: Brown
DRT Reinforced Cush Drive Kit (12 springs) for Vespa 25 GT/GTR/Super VNC1T 11001-
Vespa 160 GS VSB1T
Vespa 180 SS VSC1T
Vespa 180 Rally VSD1T
Vespa 200 Rally VSE1T
Vespa PX 125
Vespa PX 150
Vespa PE 200
All models
SIP right brake lever for Vespa 50-125/PV/ET3/PK/S/XL/125 VNA–TS/150 VBA-T4/160 GS/180 SS/Rally/PX80-200/PE/Lusso
Vespa 50-125/PV/ET3/PK/S/XL/125 VNA–TS/150VBA-T4/160 GS/180 SS/Rally/PX80-200/PE/Lusso
CNC aluminum
silver anodized
Grease nipple joint spring M8x1.25 mm for Vespa 125 GTR 2°/TS 2°/150 Sprint V 2°/Super 2°/200 Rally 2°/P150S
for Vespa 125 GTR 2°/TS 2°/150 Sprint V 2°/Super 2°/200 Rally 2°/P150S
suitable also for Vespa 125 V1-TS/150 VL-Super/180-200 Rally
a=15mm mm
steel, galvanized
fork M8
WURTH sealant based on silicone Super RTV with high torque capacity - 200ml
Content: 200 ml
Chemical base: Neutral curing silicones, oxime base
Odor/fragrance: Characteristic
Skinning time min: 5 min
Conditions for skinning time: compliant with ASTM D-4678
Full cure rate: 2 mm/g
Conditions for full cure: 23°C and 50% relative humidity
Shore A hardness: 40
Tensile strength min.: 2.2 N/mm²
Conditions for tensile strength: compliant with ASTM D-412
Conditions for maximum elongation at break: 300% / compliant with ASTM D-412
Thermal conductivity λ: 0.2 J/(m*s*K)
Conditions for thermal conductivity λ: in compliance with ASTM D-2214/70
Coefficient of thermal expansion: 0.0002 1/K
Conditions for coefficient of thermal expansion: compliant with ASTM EB-31
Dielectric strength: 16 kV/mm
Conditions for dielectric strength: compliant with ASTM D-149
Dielectric constant: 2.8
Conditions for dielectric constant: 1 MHz, ASTM D-150
Dissipation factor
Universal smartphone holder for Vespa complete with USB charging cable
Adjustable for all smartphone brands, CNC machined forged aluminum, black anodized
Vespa 160 GS 1°, VSB1M -> 0036097
Direct input, full shoulder
stroke: 60.0mm
connecting rod: 110.0mm
with bushing
piston pin Ø 15mm
All models registered up to December 1998
In black metal
Size: 170x170 mm
All models
Vespa GS 160 VSB1T 29901>
Vespa SS 180 VSC1T
Vespa 160 GS VSB1T 0029901>
Vespa 180 SS VSC1T
Tin poster with central embossed image.
Dimensions 30x40 cm.
Brown color. Equipped with touchscreen compatibility and knuckle protection, the Gig Pro gloves are made of genuine leather, feature CE D30 protections, and are CE and Moto CE certified.
- 100% genuine goat leather
- soft D30 inserts on knuckles and palm
- velcro adjustment on the wrist
- EN 13594:2015-CE motorcycle certified
Left/right rearview mirror for Vespa 50/90/125/150/180/200
Vespa 50/90/125/150/180/200
Adjustable stem (Length 34 cm)
Thread: 8mm
Complete phosphate shock absorber for Vespa 50-125/PV/ET3/125 VNB4T-TS/150 VBB2T-Super/160 GS 2°/180 SS/Rally/PX80-200/PE/Lusso/'98/MY/'11/T5
Vespa 50
Vespa 90
Vespa 125 Primavera ET3
Vespa 125 VNB4T 114714 >
Vespa 125 Super VNC1T
Vespa 125 GT VNL1>2T
Vespa 125 GTR VNL2T
Vespa 125 TS VNL3T
Vespa 150 VBB2T 172370 >
Vespa 150 GL VLA1T
Vespa 150 Sprint VLB1T
Vespa 150 Sprint Veloce VLB1T
Vespa 160 GS VSB1T 0032157>
Vespa 180 Rally VSD1T
Vespa 200 Rally VSE1T
Vespa PX Arcobaleno (adaptable)
Vespa PE Arcobaleno (adaptable)
Complete with spring
Vespa 50/90/125/150/180/200
round
Ø 100 mm
chrome
bar length: 370mm
for handlebar tube/leg guard bracket, incl. bar and clamp Ø 22mm
GFK
ivory
brown leather
Sizes: S:55-56cm / M:57-58cm / L:59-60 / XL:61-62
All models
8 mm
Plastic
Bag/suitcase (large) as an alternative to the MOTO NOSTRA trunk 480x300x270mm
Thanks to its rain cover, it withstands all weather conditions and is therefore a perfectly adequate substitute for a conventional hard shell case.
Bag material: waxed canvas (water-repellent)
Leather straps with brass buckles and studs
Hidden underneath, practical snap closures
Snap lock with numeric code (the code can be set by the customer, factory set to '00')
Beautiful Moto Nostra lettering in vintage look
Side compartments with zipper
Includes rain cover
With carrying handle
Retro/Vintage look
Mounting with straps (part of the bag) on luggage rack / carrier
The bag is very easy to mount on the luggage rack or carrier with mounting straps attached (removable) to the bag. Also available in a large version with 35 liters of storage space (see "alternatives")
Bag/small suitcase as an alternative to MOTO NOSTRA top case 330x190x180mm
Thanks to its rain cover, it withstands all weather conditions and is therefore an absolutely adequate substitute for a conventional hard shell case.
Bag material: waxed canvas (water-repellent)
Leather straps with buckles and brass studs
Hidden underneath, practical snap closures
Snap lock with numeric code (the code can be set by the customer, factory set to '00')
Beautiful Moto Nostra lettering in vintage look
Side compartments with zipper
Includes rain cover
With carrying handle
Retro/Vintage look
Mounting with straps (part of the bag) on luggage rack / carrier
The bag is very easily mounted on the luggage rack or on a carrier with mounting straps attached (removable) to the bag. Also available in a large version with 35 liters of storage space (see "alternatives")
Black bag/small suitcase as an alternative to the MOTO NOSTRA trunk 330x190x180mm
Thanks to its rain cover, it withstands all weather conditions and is therefore a perfectly adequate substitute for a conventional hard shell case.
Bag material: waxed canvas (water-repellent)
Leather straps with buckles and brass studs
Hidden underneath, practical snap closures
Snap lock with numerical code (the code can be set by the customer, factory set to '00')
Beautiful Moto Nostra lettering in vintage look
Side compartments with zipper
Includes rain cover
With carrying handle
Retro/Vintage look
Mounting with straps (part of the bag) on luggage rack / carrier
The bag is very easily mounted on the luggage rack or on a carrier with mounting straps attached (removable) to the bag. Also available in a large version with 35 liters of storage space (see "alternatives")
All models
Vespa 50/80/90/125/150/160/180/200
Felt holder for contact lubrication for Vespa 50-125/PV/125 VM-TS/150 VL-Super/160 GS/180 SS/Rally/P125-150X/P150S
Vespa 125/150/160/180/200
All Vespa models
Stand reinforcement plate for Vespa 125 VNB2-6/Super/GT/GTR/TS/150 VBB/Super/GL/Sprint/V./160 GS/180 SS/Rally
Vespa 125 VNB2-6/Super/GT/GTR/TS/150 VBB/Super/GL/Sprint/V./160 GS/180 SS/Rally
Size: 229x99mm
Thickness: 2mm
All models / Tutti i modelli
Pair of footrests for Vespa 125 VNB2T 09001->/VNB3-6/GT/GTR/Super/TS/150 VBB1T 17451->/VBB2T/GL/Sprint/V/160 GS/180 SS/Rally
Vespa 125 VNB3T > VNB6T
Vespa 125 Super VNC1T
Vespa 125 GT VNL2T
Vespa 125 GTR VNL2T
Vespa 125 TS VNL3T
Vespa 150 VBB1T 17451>
Vespa 150 VLA1T
Vespa 150 Sprint VLB1T
Vespa 150 Sprint Veloce VLB1T
Vespa 150 VBB2T
Vespa 160 GS VSB1T
Vespa 180 SS VSC1T
Vespa 180 Rally VSD1T
Vespa 200 Rally VSE1T
20 mm
Oil canister support - luggage rack for inner shield right and left side -MRP- Vespa Smallframe, Largeframe 10 inch - to be mounted on the thread for the front spare wheel support - left side
All models
Fits all models with the two M8 threads at the front in the frame tunnel, e.g. Sprint, V50, Primavera, VNB, VBB etc.
Powder-coated black steel, very stable design Incl. rubber with which you can e.g. attach an oil bottle or a can. Also fits behind the usual spare wheel holders.
With slots for a leather strap (not included).
Included in delivery:
Two powder-coated steel mounts, design for the left and right side
Screws and rubber pad to protect the paint
Locking rubber with plastic ball
RIPARO START outdoor cover in black polyester for scooter/vespa with top case and windshield
Note: For models with top box and windshield
Matte black aluminum tubeless VMC rim 2.10/10 for Vespa 50-125/PV/ET3/PK/S/XL/XL2/125 GT-TS/150 GL/GS VS5T/Sprint/V/T4/Rally/PX/PE/Lusso/T5/LML Star/DLX/Deluxe 2T/4T
Vespa 50/80/90/125/150/160/180/200
Measure--> 2.10-10" with pre-installed valve
Usable with tires: - 3.00 x 10 - 3.50 x 10 - 90/90-10
Without Nuts
l=400 mm
Ø 60 mm
wood