Vespa 150 VBB2T
Malossi Clutch Kit 6 Springs POWER UP CLUTCH SYSTEM for Vespa 125/150 VNB-GT-GTR-TS-PX-VBB-GL-Sprint-Sprint Veloce
Vespa 125 VNB/GT/GTR/TS/PX
Vespa 150 VBB/GL/Sprint/Sprint Veloce/PX
The Malossi range for the Vespa offers products of extremely high technology capable of developing performance increases so exceptional compared to the standard, that they require the adaptation of other fundamental components of the vehicle as well.
Just compare a Vespa PX 200 E produced in 1978, which originally develops a power of 12.35 HP at 5700 RPM, with a Vespa "tuned" with Malossi Kits, which can develop 27.5 HP at 8000 RPM, that is, more than double the HP at an extremely higher rotation speed, to understand that it was absolutely necessary to design a clutch group capable of withstanding the stresses due to such a performance increase!
The Malossi POWER UP CLUTCH SYSTEM clutch groups are designed to provide a solution and overcome all the problems that inevitably arise when the clutch group's technology is not adequate to the other engine components. A traditional clutch, having to transmit to the gears more than doubled power, while having to rotate much faster, can lead to failures of the bell under the effect of centrifugal force, to slipping and deformations that result in annoying and not very reassuring metallic noises, up to the classic clutch slippage caused by the insufficient friction developed by the
Vespa 125/150
Facendo click su acquista verrano visualizzate tutte le misure disponibili
Spessore--> 1,0 mm
Crankshaft advanced MAZZUCCHELLI for SIP for Vespa 125/150 Super-Sprint-GT-GTR-TS-SUITABLE TO: VESPA 150 2% '59 VESPA GT - GTR - TS 125 - VESPA 125 (VNB1>6T-BVA/VBB/GL)
Vespa 125 Super VNC1T
Vespa 125 GT VNL2T
Vespa 125 GTR VNL2T
Vespa 125 TS VNL3T
Vespa 150 Super VBC1T
Vespa 150 Sprint VLB1T
Vespa 150 Sprint Veloce VLB1T
105 mm stroke. D. 17 MM
Roller cage
Sip Premium Bearing Crankshaft 25X62X12 mm (C4) for Vespa 125 VM/VN-VNA-VNB-GT-GTR-TS-PX-Super-150 VL-VB1T-GS-VBA-VBB-Super-GL-Sprint-PX-160 GS-180 SS-200PE-Rally
Vespa 125 V30-TS/150 VL-Super/160 GS/180 SS/Rally/PX80-200/PE/Lusso/T5/Cosa
Flywheel side for Vespa 125 V30-TS 1°/150 VL-Super 1°
Measurements: 25x62x12 mm
High Carbon Chrome Steel
reinforced, made in Japan, C4
9 balls
BGM Pro FKM engine oil seal kit (E10/ethanol resistant) for Vespa 125 VNB/GT/GTR/Super-150 VBA/VBB/GL/Sprint/Super
Vespa 125 VNB1T > VNB6T
Vespa 125 GT VNL1>2T
Vespa 125 GTR VNL2T >145900
Vespa 125 TS VNL3T >18138
Vespa 150 Sprint VLB1T
Vespa 150 Sprint Veloce VLB1T >294259
Vespa 150 VBB1T > VBB2T
Vespa 150 VBA1T
Vespa 150 GL VLA1T
KIT COMPOSED OF:
N.1 CORTECO OIL SEAL 20x62x6.5 CLUTCH SIDE
N.1 CORTECO OIL SEAL 20x40x6 FLYWHEEL SIDE
N.1 CORTECO OIL SEAL (27X37X7) REAR WHEEL
+ O-RINGS
All Vespa models
Vespa 125 VNA1>2T
Vespa 125 VNB1>6T
Vespa 150 VBA1T
Vespa 150 VBB1>2T
In Raw Metal
Spacer washer nut for Vespa 50-125/PV/ET3/PK50-125/S/SS/XL/125 VM/VN/VNA-TS/150 VL/VB/GS/VBA-T4/160 GS/180 SS/Rally/PX80-200/PE/Lusso/'98/MY/'11/T5/Cosa
All models
Galvanized
Vespa 125 V31>33T
Vespa 125 VM1>2T
Vespa 125 VN1>2T
Vespa 125 VNA1>2T
Vespa 125 VNB1>6T
Vespa 150 VL1>3T
Vespa 150 VB1T
Vespa 150 VBA1T
Vespa 150 VBB1>2T
Includes nuts and washers, budget version
Pair of CULT VANS Waffle grips Ø 22/22 mm in Dark Green color for Vespa Vespa 125 V1-15/V30-33/VM/VN/VU/VNB3>6T/150 GL/VBA/VB1/GS/160 GS
Vespa 150 VB1T
Vespa 150 VBA1T
Vespa 150 VBB1T > VBB2T
Vespa 125 VNB3T > VNB6T
Vespa 150 GS VS2T > VS5T
Vespa GS 160 VSB1T
Vespa 150 GL VGL1T
Vespa 150 GL VGLA1T
Vespa 150 GL VGLB1T
for handlebar tube Ø 22/22 mm
l=125 mm
Pair of CULT VANS Waffle Ø 22/22 mm black grips for Vespa Vespa 125 V1-15/V30-33/VM/VN/VU/VNB3>6T/150 GL/VBA/VB1/GS/160 GS
Vespa 150 VB1T
Vespa 150 VBA1T
Vespa 150 VBB1T > VBB2T
Vespa 125 VNB3T > VNB6T
Vespa 150 GS VS2T > VS5T
Vespa GS 160 VSB1T
Vespa 150 GL VGL1T
Vespa 150 GL VGLA1T
Vespa 150 GL VGLB1T
for handlebar tube Ø 22/22 mm
l=125 mm
Vespa 125 GT VNL2T
Vespa 125 GTR VNL2T
Vespa 125 TS VNL3T
Vespa 125 PX
Vespa 150 Sprint VLB1T
Vespa 150 Sprint Veloce VLB1T
Vespa 150 PX
Vespa 200 PE
Brand new Pinasco SI 28 VRX-R carburetor with recalculated intake trumpet made from solid material, optimizes performance to the maximum even at low revs, complete with volumetric sponge.
Magnetic smartphone holder MRP universal for displays up to 6" for all Vespa models
Vespa 150 VB1T
Vespa 150 VBA1T
Vespa 150 VBB1T > VBB2T
Vespa 125 VNB3T > VNB6T
Vespa 150 GS VS2T > VS5T
Vespa GS 160 VSB1T
Vespa 150 GL VGL1T
Vespa 150 GL VGLA1T
Vespa 150 GL VGLB1T
Diameter: 22 mm
Color: Gray
Wheel hub oil seal 27x37x7 mm for Vespa 50-125/PV/ET3/PK/XL/XL2/125 VNA/VNB/GT 1°/GTR 1°/150 VBA/VBB/VGLA/B/GL/Sprint 1°/180 Rally
Vespa 50 V5A1T N,L,R
Vespa 50 Special V5A2>3T
Vespa 50 Special V5B1>4T
Vespa 90 V9A1T
Vespa 125 Primavera VMA1T>2T
Vespa 125 Primavera ET3 VMB1T
Vespa 125 VNA1>2T
Vespa 125 VNB1>6T
Vespa 125 GT VNL2T> 76107
Vespa 125 GTR VNL2T> 118278
Vespa 150 VBA1T
Vespa 150 VBB1>2T
Vespa 150 GL VLA1T
Vespa 150 Sprint VLB1T >1151814
Vespa 150 Sprint V. VLB1T> 0165002
Vespa 180 Rally VSD1T
All models
l=200 mm
l=300 mm
metal
Green, White, Red
l=200 mm
l=300 mm
metal
Yellow, White, Blue
l=400 mm
l=300 mm
metal
Yellow, White, Blue
Carburetor gasket kit for PHBL 20/22/24/25/26, AS/AD/BS/BD/GS/HS/ED/GD
Vespa 50/90/125/150/200
11-piece kit
Polini HT FOR RACE Z 24 clutch for primary Z64 straight teeth for Vespa 125 VNA/VNB/TS/150 VBA/VBB/GL/Sprint/Super/180-200 Rally/PX80-200/PE/Cosa/T5
Vespa 125 VNA/VNB/TS/150 VBA/VBB/GL/Sprint/Super/180-200 Rally/PX80-200/PE/Cosa/T5
The Polini "HT Clutch for Race" is an innovative racing clutch designed for the most demanding riders. Designed for Vespa Largeframe, it offers exceptional performance thanks to advanced technologies.
Main features:
-Reduced mass on the crankshaft and numerous adjustment options.
-Suitable for high torque.
-Lightweight aluminum construction to improve performance.
-Needle bearing to reduce friction and improve shifting.
-Aluminum friction discs to optimize grip and power transmission.
For PWK/PHBL/VHST carburetors
Vespa 125 VNB1>6T
Vespa 125 VNA1>2T
Vespa 150 VBA1T
Vespa 150 VBB1>2T
Vespa 150 GL VLA1T
Note: Set of 3 sliders, including 1 with a cut for the kickstand spring
Vespa 125 VNA2T 081469 >
Vespa 125 VNB1T > VNB6T
Vespa 150 VBA1T
Vespa 150 VBB1T > VBB2T
Vespa 150 GL VLA1T
3 Pc. Kit
Complete black Sip Classic seat for Vespa 80/125/150/200 VNB-VBB-VBA-Super-Sprint-GT-GTR-GL-PX
Vespa 125 VNA1>2T
Vespa 125 VNB1>6T
Vespa 125 Super VNC1T
Vespa 150 VBA1T
Vespa 150 VBB1>2T
Vespa 125 GT VNL1>2T
Vespa 125 GTR VNL2T
Vespa 125 TS VNL3T
Vespa 150 Sprint VLB1T
Vespa 150 Super VBC1T
Vespa 150 GL VLA1T
Vespa 150 Sprint Veloce VLB1T
Vespa PX PE
Vespa 50/80/90/125/150/180/200
Stem 12 mm, thread M10x1.25
Flange for insertion of bellows intake on Vespa PX, T5, Sprint, Rally, GT, GTR, GL150, Super, VNA, VNB, VBA, VBB frame
Vespa PX, T5, Sprint, Rally, GT, GTR, GL150, Super, VNA, VNB, VBA, VBB
All models / All Models
Rounded head
Diameter: 1.5 mm
Kit of 10 pcs.
Metal wall clock in the shape of an apple, one of the famous symbols of Vespa communication. Blue color with a black background.
Faucet disassembly tool for Vespa 50-125/PV/ET3/PK50-125/XL/XL2/125 V1-33/VN/VM/Hoffmann/ACMA/VNA-TS/150 VBA-T4/VL//PX80-200/PE/Lusso/'98/MY/'11/T5
All models EXCLUDED: Vespa 125 VN1>2T, Vespa 125 VNA1>2T, Vespa 150 VBA1T>81256, Vespa GS 160 VSB1T, 180 SS VSC1T, 180/200 Rally
Kit 2 bushings D. 11x8.2x10 for Malossi V-ONE and VR-ONE Vespa 125/150/200 Sprint-S.Veloce-GT-GTR-TS-PX-PE engine case
Malossi V-ONE and VR-ONE engine casing Vespa 125/150/200 Sprint-S.Veloce-GT-GTR-TS-PX-PE
L=850 mm
l=850 mm
a=90 mm
ceramic
green/red/black/white
suitable for dishwasher
ceramic
red/white/yellow
suitable for dishwasher
Complete black Sip Sport seat for Vespa 80/125/150/200 VNB-VBB-VBA-Super-Sprint-GT-GTR-GL-PX
Vespa 125 VNA1>2T
Vespa 125 VNB1>6T
Vespa 125 Super VNC1T
Vespa 150 VBA1T
Vespa 150 VBB1>2T
Vespa 125 GT VNL1>2T
Vespa 125 GTR VNL2T
Vespa 125 TS VNL3T
Vespa 150 Sprint VLB1T
Vespa 150 Super VBC1T
Vespa 150 GL VLA1T
Vespa 150 Sprint Veloce VLB1T
Vespa PX PE
MRP intake cone for SI 24.24 Carburetors Vespa 200 Rally/P200E/PX200 E-Vespa 125 VNB-TS/150 VBA-Super/180 Rally/PX80/125/150E
Vespa 200 Rally/P200E/PX200 E
Vespa 125 VNB-TS/150 VBA-Super/180 Rally/PX80/125/150E
Rear shock absorber Pinasco for Vespa 50/90/125/150/160/180/200 N-L-R-Special-Primavera-GT-GTR-Sprint-Rally-PX-PE
Vespa 50 V5A1T N,L,R
Vespa 50 Special V5A2>3T
Vespa 50 Special V5B1>4T
Vespa 90 V9A1T
Vespa 125 Primavera VMA1T>2T
Vespa 125 Primavera ET3 VMB1T
Vespa 125 VNB4T 114714 >
Vespa 125 Super VNC1T
Vespa 125 GT VNL2T
Vespa 125 GTR VNL2T
Vespa 125 TS VNL3T
Vespa 125 PX
Vespa 150 VBB2T 172370 >
Vespa 150 GL VLA1T
Vespa 150 PX
Vespa 150 Sprint VLB1T
Vespa 150 Sprint Veloce VLB1T
Vespa 180 Rally VSD1T
Vespa 200 Rally VSE1T
Vespa
Double-acting oleo-pneumatic shock absorber with spring preload
adjusted by millimeter aluminum ring nut, calibrated harmonic steel spring.
Body: black, spring black
Vespa 125/150/180 VNB-VBA-VBB-SS
In plastic, gray
Single internal compartment, external pocket with zip.
Dimensions: 40x35 cm