Vespa 150 VBB2T
Retaining spring for clutch cover lever 125 V1-TS/150 VL-Super/Rally/PX80-200/PE/Lusso/Cosa/T5
Vespa 125/150/160/180/200
In Burnished Steel
Ref. Orig. 046740
Vespa VNA1T>2T - VNB1T>6T - VNC1T - VNL2T>145900 - VNL3T>18138 - VGLA1T - VGLB1T - VBA1T - VBB1T>2T - VBC1T>412373 - VLA1T - VLB1T>294259 - VSB1T - VSC1T - VSD1T - VSE1T>33996 - APE: AE01T>2T - AE1T>3T - AD1T>2T - PENTARO: APC1T>2T
Kit of 10 clutch springs -BGM PRO XL for clutch BGM Pro Superstrong Vespa 125/150/200 Sprint-S.Veloce-GT-GTR-TS-PX-PE
Vespa 125 VNB/GT/GTR/TS/PX
Vespa 150 VBB/GL/Sprint/Sprint Veloce/PX
Vespa 200 PE
The bgm PRO clutch springs are manufactured in Germany and are subject to continuous quality control. The material used, Oteva70®, makes the spring block stable and true to size. The spring does not deviate laterally until it is blocked and, once released, returns to its original length. The clutch spring retains all its elastic strength. The spring rate is significantly tighter than that of an original spring. Ideal for high-performance engines.
Vespa 125 V1>15T
Vespa 125 V30>33T
Vespa 125 VM1>2T
Vespa 125 VN1>2T
Vespa 125 VNA1>2T
Vespa 125 VNB1>3T
Vespa 125 VNB4T>114713
Vespa 150 VL1>3T
Vespa 150 VB1T
Vespa 150 VBA1T
Vespa 150 VBB1T
Vespa 150 VBB2T>172369
Vespa 150 GS VS1>5T
Blackened Finish
Measurements: M9 with 14 mm wrench
Vespa 98/125/150/160/180/200
Dimensions--> M9 with 14 mm wrench
Flywheel nut M11x1.5 mm for Vespa 125 VNB/GT 1°/GTR 1°/Super/150 VBB2 2°/GL 2°/Sprint 1°/V 1°/Super 1°
Vespa 125 VNB/GT 1°/GTR 1°/Super/150 VBB2 2°/GL 2°/Sprint 1°/V 1°/Super 1°
for CDI ignition PARMAKIT/VESPATRONIC/VAPE
a=17.3mm
Ø 19.3 mm
key 14mm
Measurements: M 7 with 11 mm wrench
Finish: Galvanized
Flywheel fastening nut M11x1.5 key size 14 for Vespa 125/150 VM-GT-GTR-Super-Sprint-VBA-VBB-VL-GS
Vespa 125 VM1>2T
Vespa 125 Super VNC1T
Vespa 125 GT VNL1>2T
Vespa 125 GTR VNL2T
Vespa 125 TS VNL3T
Vespa 150 Sprint VLB1T
Vespa 150 Sprint Veloce VLB1T
Vespa 150 VBA1T
Vespa 150 VBB1>2T
Vespa 150 VL1>3T
Vespa 150 GS
Ref.Orig: S1544
Flywheel fixing nut for Vespa 125 VNB-GT-GTR-150 VBA-VBB-GL-Sprint-S. Fast
Vespa 98
Vespa V1>15T
Vespa 125 V30>33T
Vespa 125 VM1>2T
Vespa 125 VN1>2T
Vespa 125 VNA1>2T
Vespa 125 VNB1>4T
Vespa 150 VL1>3T
Vespa 150 GS VS1>5T
Vespa 150 GL VGL1T
Vespa 150 GS VDTS
Vespa 150 VB1T
Vespa 150 VBA1T
Vespa 150 VBB1>2T>228698
Vespa 150 GL VLA1T >077291
Finish: Burnished
Hexagonal nut M7x1mm medium height (5.5mm) for engine casing tightening and various uses
All models/All models
Measurements: M 7 with 11 mm wrench
Finish: Galvanized
All models
Vespa 50
Vespa 90
Vespa 125 1951> V32T>33T 178720>
Vespa 150 from 1954
Vespa 160 GS VSB1T
Vespa 180 Rally VSD1T
Vespa 200 Rally VSE1T
For drum/wheel fixing
Galvanized
All Models
Galvanized
Zinc-Plated Hex Nut Kit 5 Pcs (M8 with 11 mm wrench) for Vespa 50/125/150 N-L-R-VM-VN-VNA-VNB-Super- VBA-VBB-VB1
Vespa 50 N/ L/ R -90 - 125 VM1>2T 125 VU1T - VN1>2T - VNA1>2T - VNB1>6T 125 Super VBC1T 150 VL1>3T 150 VB1T 150 VBA1T 150 VBB1>2T 150 Super VBC1T GS 150 VS1>4T
Wheel rim fastening
Vespa 125 VNB3>6T
Vespa 150 VBB1T 71001>
Vespa 150 VBB2T
Measurements: M 10 x 22
Vespa 125 V1>15T/V30>33T/TS/150 VL -Super/160 GS/180 SS/Rally /PX80-200/PE/Lusso/T5/Cosa/PX/PX Lusso/T5/Cosa
Engine mounting bolt for Vespa 125/150/160/180/200 VNA-VNB-VBB-GT-GTR-PX-TS-Rally-SS
Vespa 125 VNA1>2T
Vespa 125 VNB1>6T
Vespa 125 Super VNC1T
Vespa 125 GT VNL2T
Vespa 125 GTR VNL2T
Vespa 125 TS VNL3T
Vespa 125 PX
Vespa 150 VBA1T
Vespa 150 VBB1>2T
Vespa 150 GL VLA1T
Vespa 150 Super VBC1T
Vespa 150 Sprint VLB1T
Vespa 150 Sprint Veloce VLB1T
Vespa 150 PX
Vespa 160 GS VSB1T
Vespa 180 SS VSCT
Vespa 180 Rally VSD1T
Vespa 200 Rally VSE1T
Vespa 200 PE
Measurements: M 14 x L. 235 mm with 22 mm wrench
Included: Nut and grower washer
Notes--> ECONOMIC VERSION
Fan mounting kit and gearbox cross bushing for Vespa V1>15T/V30>33T/VM/VN/VB1/GS/VBA1T/VBB1/VNA
Vespa 125 V1>15T, Vespa 125 V30>33T, Vespa 125 VM1T>2T, Vespa 125 VN1T>2T, Vespa 125 VNA1T>2T, Vespa 125 VNB1T>3T, Vespa 150 VL1T>3T, Vespa 150 VB1T, Vespa 150 GS VS1T>5T, Vespa 150 VBA1T, Vespa 150 VBB1T>2T
Fan fastening bolts and clips kit for Vespa V1>15T/V30>33T/VM/VN/VB1/GS/VBA1T/VBB1/VNA
Vespa 125 V1>15T, Vespa 125 V30>33T, Vespa 125 VM1T>2T, Vespa 125 VN1T>2T, Vespa 125 VNA1T>2T, Vespa 125 VNB1T>3T, Vespa 150 VL1T>3T, Vespa 150 VB1T, Vespa 150 GS VS1T>5T, Vespa 150 VBA1T, Vespa 150 VBB1T>2T
Included: Stops
M6 x 11 bolts, 8mm wrench
Vespa 125 VNA-VNB-Super-TS/150 VBA-Super/160 GS/180 SS/Rally/PX80-200/PE/Lusso/T5/Cosa
Pair of oil fill/drain plugs M8x8 BGM Pro with magnet for Vespa 50/125/150/200 Special-Primavera-PX-GT-VBB-GL-Rally
Tutti i modelli / All Models
Measurements: M 8 wrench 11 mm
Includes fiber washer
All models / Tutti i modelli
Measurements: M 8 key 11 mm
Includes fiber washer
All Models / Tutti i modelli
Engine oil cap “Old Style” perfectly similar to the original Piaggio with the word “OLIO” on the top of the hexagon,
suitable for all Vespa or Ape engines with M8 oil drain threading.
The special neodymium magnet embedded with high magnetic power,
attracts all the micro ferrous material produced by the gears, extending the life of the bearings.
Essential especially in modified engines where the gears are heavily stressed.
Units in the box: 1
Only one screw and one fiber washer are provided.
The top cap for oil filling does not need to be magnetized.
MD Racing oil cap with magnet machined from solid for Vespa 50/125/150/200 Special-Primavera-PX-GT-VBB-GL-Rally
All models / Tutti i modelli
Engine oil cap “RACING STYLE” compatible with the original Piaggio,
suitable for all Vespa or Ape engines with M8 oil drain thread.
The special neodymium magnet embedded with high magnetic power attracts all the micro ferrous material produced by the gear system, extending the life of the bearings.
Indispensable especially in tuned engines where the gears are heavily stressed.
M14x1.5 mm nut engine mounting pin for Vespa 125/150/160/180/200 VNA-VNB-VBB-GT-GTR-PX-TS-Rally-SS
Vespa 125 VNA1>2T
Vespa 125 VNB1>6T
Vespa 125 Super VNC1T
Vespa 125 GT VNL2T
Vespa 125 GTR VNL2T
Vespa 125 TS VNL3T
Vespa 125 PX
Vespa 150 VBA1T
Vespa 150 VBB1>2T
Vespa 150 GL VLA1T
Vespa 150 Super VBC1T
Vespa 150 Sprint VLB1T
Vespa 150 Sprint Veloce VLB1T
Vespa 150 PX
Vespa 160 GS VSB1T
Vespa 180 SS VSCT
Vespa 180 Rally VSD1T
Vespa 200 Rally VSE1T
Vespa 200 PE
a=8.0mm
key 22mm
steel, galvanized
Piaggio engine mounting bolt for Vespa 125/150/160/180/200 VNA-VNB-VBB-GT-GTR-PX-TS-Rally-SS
Vespa 125 VNA1>2T
Vespa 125 VNB1>6T
Vespa 125 Super VNC1T
Vespa 125 GT VNL2T
Vespa 125 GTR VNL2T
Vespa 125 TS VNL3T
Vespa 125 PX
Vespa 150 VBA1T
Vespa 150 VBB1>2T
Vespa 150 GL VLA1T
Vespa 150 Super VBC1T
Vespa 150 Sprint VLB1T
Vespa 150 Sprint Veloce VLB1T
Vespa 150 PX
Vespa 160 GS VSB1T
Vespa 180 SS VSCT
Vespa 180 Rally VSD1T
Vespa 200 Rally VSE1T
Vespa 200 PE
Dimensions: M 14 x L. 235 mm with a 22 mm wrench
Included: Nut and grower washer
Vespa 50 R/ 2°/S1°/Special V5A2/3T/90 1°/125 VM/VN/VNA/VNB/GT/GTR/TS/150 VL/VB1/VBA/VBB/VD/VGLA/B/1/GL/Sprint/V/Rally/P80-150X/PX80-150 E 1°/P150S 1°/P200E 1°
Dimensions--> 4.0 mm, Ø 27.0mm, Øi 14 mm
Aluminum washer oil drain/fill plug
Small Parts Box -HÜNERSDORFF, Classic (225x335x55mm)- 24 compartments, blue
dimensions: 225 x 335 x 55 mm, 24 compartments, blue
transparent lid and base for optimal content viewing - compartment dimensions: 3= 52 x 52 x 45
Fiber washer for oil drain/fill plug
Thrust washer between bushing and clutch gear + 2.0mm for Vespa 125/150 VNB-VBB-Sprint-GT-GTR
Vespa 125/150 VNB-VBB-Sprint-GT-GTR
The +2.00mm shim is needed to install DRT clutch gears for PX on 125/150 VNB-VBB-Sprint-GT-GTR models
Cylinder head support washer MD Racing (Studs M7) for VESPA 50 - 90 - 125 PRIMAVERA - ET3 - PK 125 - PK 125 XL - PX 125/150 - PXE ARC. - GTR 125 - SUPER 150 - SPRINT VELOCE 150
VESPA 50 - 90 - 125 PRIMAVERA - ET3 - PK 125 - PK 125 XL - PX 125/150 - PXE ARC. - GTR 125 - SUPER 150 - SPRINT VELOCE 150
Stem shift washer for Vespa V1T>15T - V30T>33T - VU1T - VM1T>2T - VN1T>2T - VNA1T>2T - VNB1T>6T - VNC1T - VNL2T >78300 GT - VNL2T>124013 GTR - VL1T>3T - VB1T - VBA1T - VBB1T>2T - VBC1T >181686 - VS1T>5T
Vespa 125 V30>33T
Vespa 125 VM1>2T
Vespa 125 U VU1T
Vespa 125 VN1>2T
Vespa 125 VNA1>2T
Vespa 125 VNB1>6T
Vespa 125 Super VNC1T
Vespa 125 GT VNL2T >78300
Vespa 125 GTR VNL2T >124013
Vespa 150 GS VS1>5T
Vespa 150 VL1>3T
Vespa 160 GS VSB1T
Vespa 150 VB1T
Vespa 150 VBA1T
Vespa 150 VBB1>2T
Vespa 150 GL
Int.d 7.5mm Ext.d 16mm thickness 0.8mm
Vespa 50/90/125/150/160/200
internal diameter 13mm
external diameter 20mm
Complete sport RDV Race one seat in black with white stitching for Vespa 80/125/150/200 VNB-VBB-VBA-Super-Sprint-GT-GTR-GL-PX
Vespa 125 VNA1>2T
Vespa 125 VNB1>6T
Vespa 125 Super VNC1T
Vespa 150 VBA1T
Vespa 150 VBB1>2T
Vespa 125 GT VNL1>2T
Vespa 125 GTR VNL2T
Vespa 125 TS VNL3T
Vespa 150 Sprint VLB1T
Vespa 150 Super VBC1T
Vespa 150 GL VLA1T
Vespa 150 Sprint Veloce VLB1T
Vespa PX PE first series
The brand new "RDV race one" sport seat is a perfect blend of sporty aesthetics (white stitching, sporty seating, and harmony with Vespa curves) and good comfort (metal sheet base, 2.5 cm foam for seating), innovative magnetic closure to ensure maximum aesthetic result, entirely designed and created by our Staff, made possible thanks to the technical support of Nisa SRL. 100% MADE IN ITALY
Note: For PX/PE models, it fits perfectly ONLY with tanks having a wing nut cap.
For PX/PE Arcobaleno models with quick-release caps, it can be mounted by removing or lowering the central buffers provided (otherwise the central part touches before the rear part)
Cork tank cap gasket for Vespa 125 V1-33/VM/VN/VNA-TS/150 VL/VB/VBA-T4/GS VS1-5/160 GS/180 SS/Rally/P80-150X/PX80-200E/Lusso 1°/P150S/P200E
Vespa 125 from 1959 (excluding primavera ET3) Vespa 150 from 1959 Vespa 160 Vespa 180 Vespa 200
Thickness: 3 mm
Kenda Tire 3.50/8 46 M K303 4P TL for Vespa 98/125 VM/VN/VL/VB1/VNB/VNA/VBB/Super
Vespa 98, Vespa 125 from 1948 to 1965, Vespa 150 from 1954 to 1966
Deestone Tire 3.50/8 D811 4PR 46J for Vespa 98/125 VM/VN/VL/VB1/VNB/VNA/VBB/Super
Vespa 98, Vespa 125 from 1948 to 1965, Vespa 150 from 1954 to 1966