Vespa 150 VB1T
Spark plug wrench 14x22x11 for Vespa 125 V1-33/VM/VN/VNA-TS/ 150 VL/VB/VBA-Super/160 GS/180 SS/Rally/PX80-200/PE/Lusso/'98/MY/'11/T5/Cosa
Vespa 98
Vespa 125 V1>15T
Vespa 125 V15>30T
Vespa 125 V30>33T
Vespa 125 VM1>2T
Vespa 125 VN1>2T
Vespa 125 VNB1T>6T
Vespa 125 VNA1T>2T
Vespa 150 VB1T
Vespa 150 VBA1T
Vespa 150 VL1T>3T
Vespa 150 VBB1T>2T
Measurements: 14x22x11 mm
All models
Practical packaging with reduced dimensions, essential for on-the-road repairs.
The kit contains:
1 Long nose pliers
1 Wire cutter
1 Flathead screwdriver
1 Phillips screwdriver
1 Bit holder
10 Bits
1 Extension
7 Sockets (11/10/9/8/7/6/5 mm)
5 Wrenches (6/5/4/3/2 mm)
Floating pin clip of Garden MA/UA/UB23S3 for Vespa 125 VNA/150 VB/VL/GS
Vespa 125 VN2/VB/VL/VNA/150 VB/VL/GS
Clutch cover OR ring for Vespa 125 VM/VN/VNA/VNB/VBB/Sprint/GT/GTR/TS/VL-Super/160 GS/180 SS/Rally/PX80-200/PE
Vespa 125 1953>
Vespa 150 1954>
Vespa 160
Vespa 180
Vespa 200
Ring OR clutch cover for Vespa 125 VM/VN/VNA/VNB/VBB/Sprint/GT/GTR/TS/VL-Super/160 GS/180 SS/Rally/PX80-200/PE
Vespa 125 1953>
Vespa 150 1954>
Vespa 160
Vespa 180
Vespa 200
Rubber fuel tank cap gasket for Vespa 125 V1-33/VM/VN/VNA-TS/150 VL/VB/VBA-T4/GS VS1-5/160 GS/180 SS/Rally/P80-150X/PX80-200E/Lusso 1°/P150S/P200E
Vespa 125 from 1959 (excluding primavera ET3)
Vespa 150 from 1959
Vespa 160
Vespa 180
Vespa 200
Thickness: 4 mm
Notes: Resistant to unleaded gasoline
All models / Tutti i modelli
Barrel: 8x8 mm
Length: 2200 mm
Diameter: 1.86 mm
All Models
Diameter: 1.2 mm
Length: 2000 mm
Barrel: 2.8x3 mm
Carburetor nozzle measurement and cleaning tool with 20 inserts (from 0.45 to 1.5 mm)
All models
Vespa 50/80/90/125/150/180/200
280 mm
125 mm
Mounting bracket
Blue Glass
Front luggage rack CUPPINI black with gasoline can holder (5l can not included) for Vespa 80/125/150/200 PX-PE-Arcobaleno-MY
All up to the PX model / All Models >PX
Including tie rods and pads for fastening
Front luggage rack CUPPINI chrome with gasoline can holder (5l can not included) for Vespa 80/125/150/200 PX-PE-Arcobaleno-MY
All up to model PX / All Models >PX
Includes Tie Rods and Pads for Fixing
Electronic control unit idm EVOK variable advance for POLINI/PINASCO/VMC ignitions
Vespa 50/90/125/150/160/180/200
SIP clutch ring disassembly tool for Vespa 125 V1-TS/150 VL-Super/160 GS/180 SS/Rally/PX80-200/PE/Lusso -> 1994/Cosa 1/T5
vespa 125
vespa 150
Vespa 160
Vespa 180
Vespa 200
All except 125 primavera -ET3
BGM Pro Touring Exhaust for Vespa 125VM1>2T/VN1>2T-150 VL1>3T-VB1T
Vespa 125VM1>2T/VN1>2T-150 VL1>3T-VB1T
The new BGM Pro Touring muffler is a real wolf in sheep's clothing: a powerful sports exhaust that perfectly blends into the unobtrusive design of a standard exhaust. Thanks to the innovative design of the BGM PRO Touring Box, with the flat diffuser opening angle and moderate resonance length, it optimally adapts to different cylinder concepts. The result? A wonderful touring machine that moves with great thrust right from low revs.
Perfect on tuning cylinders like BGM150, Pinasco160, or CC Corsa 160/175
Vespa 125 VM1T>VM2T
Vespa 125 VN1T>2T
Vespa 150 VL1T>VL3T
Vespa 150 VB1T
BGM PRO crankshaft for Vespa Wideframe made with high-alloy forged blanks. Ideal in combination with the BGM PRO 150cc Wideframe tuning cylinder.
The crankshaft has been designed as a heavy tuning crankshaft, but it is also clearly recommended as a practically indestructible shaft for original engines.
Stroke: 57 mm
Connecting rod length: 110 mm
Piston pin: Ø15 mm
Connecting rod bearing: needle bearing (upper and lower)
One of the main advantages of the BGM PRO crankshaft compared to the original one is the use of a high-quality connecting rod with needle bearing (instead of a simple bearing bushing) and a slotted lower connecting rod eye. This greatly reduces the oil requirement, so that the engines can run smoothly even with a 1:50 mixture with current high-quality oils.
The balance factor has been improved, among other things, thanks to a hollow crank pin.
The crankshaft is suitable for all 125 and 150 cc engines. The 125 cc engines only have a stroke of 54 mm, so a cylinder designed for a stroke of 57 mm (BGM155
Fixing nut and washer DRT clutch assembly for Vespa 125/150/200 VM-VN-GT-GTR-VNA-VBA-VBB-GL-Sprint-PX
Vespa 125 (all except Primavera ET3)
Vespa 150
Vespa 160
Vespa 180
Vespa 200
Tightening with a 14 mm wrench
1L Package
2T
All models
Vespa 150 VL3T
Vespa 150 VB1T
Black brackets for fixing canister/bag on BOLLA ELABORAZIONI platform for Vespa 125/150/160/180/200
All models
Stainless steel brackets for fixing canister/bag on BOLLA ELABORAZIONI platform for Vespa 125/150/160/180/200
All models
Viton fuel tank cap gasket for Vespa 125 V1-33/VM/VN/VNA-TS/150 VL/VB/VBA-T4/GS VS1-5/160 GS/180 SS/Rally/P80-150X/PX80-200E/Lusso 1°/P150S/P200E
Vespa 125 from 1959 (excluding primavera ET3)
Vespa 150 from 1959
Vespa 160
Vespa 180
Vespa 200
Thickness: 4 mm
Premium quality
Measurements: 6.5x31 mm
All Vespa models
BGM rubber sleeve (d. 35-40) for Vespa 50/90/125/150/200 Special-N-L-R-PK-PX-Sprint-GL-TS
1L Package
All Models
Locking nut with 8 mm thread
High-performance non-silicone synthetic brake oil for both disc and drum braking systems. Suitable for braking systems equipped with electronic stability and braking control devices. It can also be used in some automotive clutch servo systems. It fully complies with the DOT 4 limits set for brake fluids.
BUMM mirror support bracket for handlebars in galvanized metal (Left) for Vespa 50/80/90/125/150/180/200
Vespa 50/80/90/125/150/180/200
Elastic strap with double hook for luggage racks, wicker baskets, and Vespa bags
Made from soft cotton, it protects against headwinds also thanks
to the drawstring that allows easy and quick adjustment. Imaginative
Vespa print with Vespa® logo on a grey or blue base.
Chrome rearview mirror (RH) without bracket for Vespa 50/90/125/150/200
Vespa 50/80/90/125/150/180/200
stem length: 160mm
Ø glass =100mm
Thread: M8x1.25mm
All models registered up to December 1998 / All models registered up to December 1998
In metal
Size: 170x170 mm
Folding aluminum loading ramp in black color with a capacity of 340 kg for motorcycle/scooter/Vespa/SI-Ciao-Bravo
All Models
Closed Length--> 1160 mm
Open Length--> 2280 mm
Capacity-----------------> 340 kg
Loading strap included
Folding aluminum loading ramp capacity 272kg for motorcycle/scooter/Vespa/SI-Ciao-Bravo
All Models
Complete BGM Pro SC Competition Shock Absorber in Silver for Vespa 125 VM1
Vespa 125 V30T > V33T (adaptable)
All models from '53 to '79
Excluding 125 Primavera ET3,PK;PX,PE
The BGM PRO SC Competition front shock absorber is an evolution of the successful BGM PRO F16 Sport series. Externally, the Competition series is distinguished by the external reservoir. It has a modified base adjustment and is therefore very suitable when used with stiff sport springs. The compression/rebound adjustment prevents diving or rapid extension on rough roads. Thanks to these features, the shock absorber is an excellent replacement
even for more powerful vehicles. The wide adjustability clearly allows the shock absorber to be used with standard springs as well, ensuring maximum comfort during driving.