Vespa 150 GS VS2T
All Vespa models with SIP ignition
All Models / Tutti i modelli
Head-cut fan cover mounting screw kit for Vespa 125 VNA/VNB/GT/GTR/Super/150 VBA/VBB/GL/Sprint/Super
Vespa 125/150/160/180/200
Kit composed of 4 M6 slotted head screws with flat washers
Pair of gear selector fixing screws for Vespa 98/125/150 V1>15T-V30>33T-VM-VN-GS-VL-VB
Vespa 98/125/150 V1>15T-V30>33T-VM-VN-GS-VL-VB
Screwdriver blade screws mm 4.8
thread length mm 9 with countersunk tallow drop.
Spring pair for starter bushing for Vespa 98/125 V1>15T-V30>33T-VM1>2T-VN1>2T-150 VL1>3T-VB1T
Vespa 98
Vespa 125 V30>33T
Vespa 125 VM1T > VM2T
Vespa 125 VN1T>2T
Vespa 150 VL1T>3T
Vespa 150 VB1T
Vespa 150 GS VS1T>5T
Retaining spring for clutch cover lever 125 V1-TS/150 VL-Super/Rally/PX80-200/PE/Lusso/Cosa/T5
Vespa 125/150/160/180/200
In Burnished Steel
Ref. Orig. 046740
Vespa 125 V1>15T
Vespa 125 V30>33T
Vespa 125 VM1>2T
Vespa 125 VN1>2T
Vespa 125 VNA1>2T
Vespa 125 VNB1>3T
Vespa 125 VNB4T>114713
Vespa 150 VL1>3T
Vespa 150 VB1T
Vespa 150 VBA1T
Vespa 150 VBB1T
Vespa 150 VBB2T>172369
Vespa 150 GS VS1>5T
Blackened Finish
Measurements: M9 with 14 mm wrench
Vespa 98/125/150/160/180/200
Dimensions--> M9 with 14 mm wrench
Measurements: M 7 with 11 mm wrench
Finish: Galvanized
Flywheel fastening nut M11x1.5 key size 14 for Vespa 125/150 VM-GT-GTR-Super-Sprint-VBA-VBB-VL-GS
Vespa 125 VM1>2T
Vespa 125 Super VNC1T
Vespa 125 GT VNL1>2T
Vespa 125 GTR VNL2T
Vespa 125 TS VNL3T
Vespa 150 Sprint VLB1T
Vespa 150 Sprint Veloce VLB1T
Vespa 150 VBA1T
Vespa 150 VBB1>2T
Vespa 150 VL1>3T
Vespa 150 GS
Ref.Orig: S1544
Flywheel fixing nut for Vespa 125 VNB-GT-GTR-150 VBA-VBB-GL-Sprint-S. Fast
Vespa 98
Vespa V1>15T
Vespa 125 V30>33T
Vespa 125 VM1>2T
Vespa 125 VN1>2T
Vespa 125 VNA1>2T
Vespa 125 VNB1>4T
Vespa 150 VL1>3T
Vespa 150 GS VS1>5T
Vespa 150 GL VGL1T
Vespa 150 GS VDTS
Vespa 150 VB1T
Vespa 150 VBA1T
Vespa 150 VBB1>2T>228698
Vespa 150 GL VLA1T >077291
Finish: Burnished
Hexagonal nut M7x1mm medium height (5.5mm) for engine casing tightening and various uses
All models/All models
Measurements: M 7 with 11 mm wrench
Finish: Galvanized
Seeger ring flywheel magnet for Vespa V50/N/R/S/Special/SR/SS/90/R/SS/100/Primavera/VNA-Sprint/
Vespa 50 V5A1T
Vespa 90 V9A1T >25000
Vespa 98
Vespa 125 V1T>15T
Vespa 125 V30T>33T
Vespa 125 VM1T > VM2T
Vespa 125 VN1T>2T
Vespa 125 VNA1T>2T
Vespa 125 VNB1>VNB4T
Vespa 150 VL1T>3T
Vespa 150 VB1T
Vespa 150 VBA1T
Vespa 150 VBB1T
Vespa 150 GS VS1T>5T
Outer diameter: 27 mm
All models
Vespa 50
Vespa 90
Vespa 125 1951> V32T>33T 178720>
Vespa 150 from 1954
Vespa 160 GS VSB1T
Vespa 180 Rally VSD1T
Vespa 200 Rally VSE1T
For drum/wheel fixing
Galvanized
Wheel fastening nut (M8 with 22 wrench) for Vespa VM-VN-VNA-VNB-VB1-VBA-VBB-GS
Vespa 125 U VU1T
Vespa 125 VM1>2T
Vespa 125 VN1>2T
Vespa 125 VNA1T > VNA2T
Vespa 125 VNB1T > VNB2T
Vespa 150 VL1T > VL3T
Vespa 150 VB1T
Vespa 150 VBA1T
Vespa 150 VBB1T>71000
Vespa 150 GS VS1T > VS4T
Vespa 150 GS VS5T >0050000
22mm wrench
S45C steel, nickel-plated
Patina
a: rod 8mm/ shoulder: 7mm/ total: 15mm
All Models
Galvanized
Zinc-plated wheel fixing nut (M8 with 22 mm wrench) for Vespa VM-VN-VNA-VNB-VB1-VBA-VBB-GS
Vespa 125 U VU1T
Vespa 125 VM1>2T
Vespa 125 VN1>2T
Vespa 125 VNA1T > VNA2T
Vespa 125 VNB1T > VNB2T
Vespa 150 VL1T > VL3T
Vespa 150 VB1T
Vespa 150 VBA1T
Vespa 150 VBB1T>71000
Vespa 150 GS VS1T > VS4T
Vespa 150 GS VS5T >0050000
Galvanized
M8
22 mm wrench
Zinc-Plated Hex Nut Kit 5 Pcs (M8 with 11 mm wrench) for Vespa 50/125/150 N-L-R-VM-VN-VNA-VNB-Super- VBA-VBB-VB1
Vespa 50 N/ L/ R -90 - 125 VM1>2T 125 VU1T - VN1>2T - VNA1>2T - VNB1>6T 125 Super VBC1T 150 VL1>3T 150 VB1T 150 VBA1T 150 VBB1>2T 150 Super VBC1T GS 150 VS1>4T
Wheel rim fastening
Engine suspension crossbar M12x280 mm for Vespa 125 VM/VN/150 VL/VB/GS150 GS VS1T-5T
Vespa 125 VM/VN/150 VL/VB/GS150 GS VS1T-5T
Vespa 125 V1>15T/V30>33T/TS/150 VL -Super/160 GS/180 SS/Rally /PX80-200/PE/Lusso/T5/Cosa/PX/PX Lusso/T5/Cosa
Fan mounting kit and gearbox cross bushing for Vespa V1>15T/V30>33T/VM/VN/VB1/GS/VBA1T/VBB1/VNA
Vespa 125 V1>15T, Vespa 125 V30>33T, Vespa 125 VM1T>2T, Vespa 125 VN1T>2T, Vespa 125 VNA1T>2T, Vespa 125 VNB1T>3T, Vespa 150 VL1T>3T, Vespa 150 VB1T, Vespa 150 GS VS1T>5T, Vespa 150 VBA1T, Vespa 150 VBB1T>2T
Fan fastening bolts and clips kit for Vespa V1>15T/V30>33T/VM/VN/VB1/GS/VBA1T/VBB1/VNA
Vespa 125 V1>15T, Vespa 125 V30>33T, Vespa 125 VM1T>2T, Vespa 125 VN1T>2T, Vespa 125 VNA1T>2T, Vespa 125 VNB1T>3T, Vespa 150 VL1T>3T, Vespa 150 VB1T, Vespa 150 GS VS1T>5T, Vespa 150 VBA1T, Vespa 150 VBB1T>2T
Included: Stops
M6 x 11 bolts, 8mm wrench
Vespa 125 V1>15T
Vespa 125 V30>33T
Vespa 125 VM1>2T
Vespa 125 VN1>2T
Vespa 150 VL1>3T
Vespa 150 VB1T
Vespa 150 GS VS1>5T
Burnished Finish
Dimensions: M9 with 14 mm wrench
Vespa 125 VN1>2T
Vespa 150 VS2T
Finish: Galvanized
Size: 7 mm
Vespa 125 VM1T>VM2T
Vespa 125 VN1T>VN2T
Vespa 150 VL1T>VL3T
Vespa 150 GL VGL1T
Vespa 150 VB1T
Vespa 150 GS VS1T>VS5T
Vespa 150 GS VS1T
Vespa 150 GS VS2T
Vespa 150 GS VS3T
Vespa 160 GS VSB1T
Vespa 180 SS VSC1T
Inner hole--> 15.5 mm
Starter washer for Vespa 125 V15-33/VM/VN/ACMA/150 VL/VB1T/GS//Hoffmann
Vespa 125 from 1951 to 1957
Vespa 150 from 1954 to 1957
Finish: Galvanized
Pair of oil fill/drain plugs M8x8 BGM Pro with magnet for Vespa 50/125/150/200 Special-Primavera-PX-GT-VBB-GL-Rally
Tutti i modelli / All Models
Measurements: M 8 wrench 11 mm
Includes fiber washer
All models / Tutti i modelli
Measurements: M 8 key 11 mm
Includes fiber washer
All Models / Tutti i modelli
Engine oil cap “Old Style” perfectly similar to the original Piaggio with the word “OLIO” on the top of the hexagon,
suitable for all Vespa or Ape engines with M8 oil drain threading.
The special neodymium magnet embedded with high magnetic power,
attracts all the micro ferrous material produced by the gears, extending the life of the bearings.
Essential especially in modified engines where the gears are heavily stressed.
Units in the box: 1
Only one screw and one fiber washer are provided.
The top cap for oil filling does not need to be magnetized.
MD Racing oil cap with magnet machined from solid for Vespa 50/125/150/200 Special-Primavera-PX-GT-VBB-GL-Rally
All models / Tutti i modelli
Engine oil cap “RACING STYLE” compatible with the original Piaggio,
suitable for all Vespa or Ape engines with M8 oil drain thread.
The special neodymium magnet embedded with high magnetic power attracts all the micro ferrous material produced by the gear system, extending the life of the bearings.
Indispensable especially in tuned engines where the gears are heavily stressed.
Aluminum washer oil drain/fill plug
Small Parts Box -HÜNERSDORFF, Classic (225x335x55mm)- 24 compartments, blue
dimensions: 225 x 335 x 55 mm, 24 compartments, blue
transparent lid and base for optimal content viewing - compartment dimensions: 3= 52 x 52 x 45
Fiber washer for oil drain/fill plug
Cylinder head support washer MD Racing (Studs M7) for VESPA 50 - 90 - 125 PRIMAVERA - ET3 - PK 125 - PK 125 XL - PX 125/150 - PXE ARC. - GTR 125 - SUPER 150 - SPRINT VELOCE 150
VESPA 50 - 90 - 125 PRIMAVERA - ET3 - PK 125 - PK 125 XL - PX 125/150 - PXE ARC. - GTR 125 - SUPER 150 - SPRINT VELOCE 150
Stem shift washer for Vespa V1T>15T - V30T>33T - VU1T - VM1T>2T - VN1T>2T - VNA1T>2T - VNB1T>6T - VNC1T - VNL2T >78300 GT - VNL2T>124013 GTR - VL1T>3T - VB1T - VBA1T - VBB1T>2T - VBC1T >181686 - VS1T>5T
Vespa 125 V30>33T
Vespa 125 VM1>2T
Vespa 125 U VU1T
Vespa 125 VN1>2T
Vespa 125 VNA1>2T
Vespa 125 VNB1>6T
Vespa 125 Super VNC1T
Vespa 125 GT VNL2T >78300
Vespa 125 GTR VNL2T >124013
Vespa 150 GS VS1>5T
Vespa 150 VL1>3T
Vespa 160 GS VSB1T
Vespa 150 VB1T
Vespa 150 VBA1T
Vespa 150 VBB1>2T
Vespa 150 GL
Int.d 7.5mm Ext.d 16mm thickness 0.8mm
Vespa 50/90/125/150/160/200
internal diameter 13mm
external diameter 20mm