Spare Parts and Accessories for Vespa
Welcome to the Spare Parts and Accessories section of RDV Scootershop, the reference point for every scooter enthusiast. Explore a catalog of over 8,900 products dedicated to Classic Vespa (from the 50 Special to the PX), Modern Vespa, Ape, Lambretta, and Piaggio mopeds (Ciao, Si, Bravo). We offer a complete range from precision mechanics (cylinder kits, crankshafts, clutches) to bodywork, upholstery, and electrical systems. Find the best aftermarket and tuning brands (such as Malossi, Polini, DR, Pinasco) and original faithful spare parts for the restoration or maintenance of your vehicle.
MD Racing oil cap with magnet machined from solid for Vespa 50/125/150/200 Special-Primavera-PX-GT-VBB-GL-Rally
All models / Tutti i modelli
Engine oil cap “RACING STYLE” compatible with the original Piaggio,
suitable for all Vespa or Ape engines with M8 oil drain thread.
The special neodymium magnet embedded with high magnetic power attracts all the micro ferrous material produced by the gear system, extending the life of the bearings.
Indispensable especially in tuned engines where the gears are heavily stressed.
M14x1.5 mm nut engine mounting pin for Vespa 125/150/160/180/200 VNA-VNB-VBB-GT-GTR-PX-TS-Rally-SS
Vespa 125 VNA1>2T
Vespa 125 VNB1>6T
Vespa 125 Super VNC1T
Vespa 125 GT VNL2T
Vespa 125 GTR VNL2T
Vespa 125 TS VNL3T
Vespa 125 PX
Vespa 150 VBA1T
Vespa 150 VBB1>2T
Vespa 150 GL VLA1T
Vespa 150 Super VBC1T
Vespa 150 Sprint VLB1T
Vespa 150 Sprint Veloce VLB1T
Vespa 150 PX
Vespa 160 GS VSB1T
Vespa 180 SS VSCT
Vespa 180 Rally VSD1T
Vespa 200 Rally VSE1T
Vespa 200 PE
a=8.0mm
key 22mm
steel, galvanized
Piaggio engine mounting bolt for Vespa 125/150/160/180/200 VNA-VNB-VBB-GT-GTR-PX-TS-Rally-SS
Vespa 125 VNA1>2T
Vespa 125 VNB1>6T
Vespa 125 Super VNC1T
Vespa 125 GT VNL2T
Vespa 125 GTR VNL2T
Vespa 125 TS VNL3T
Vespa 125 PX
Vespa 150 VBA1T
Vespa 150 VBB1>2T
Vespa 150 GL VLA1T
Vespa 150 Super VBC1T
Vespa 150 Sprint VLB1T
Vespa 150 Sprint Veloce VLB1T
Vespa 150 PX
Vespa 160 GS VSB1T
Vespa 180 SS VSCT
Vespa 180 Rally VSD1T
Vespa 200 Rally VSE1T
Vespa 200 PE
Dimensions: M 14 x L. 235 mm with a 22 mm wrench
Included: Nut and grower washer
Vespa 50 R/ 2°/S1°/Special V5A2/3T/90 1°/125 VM/VN/VNA/VNB/GT/GTR/TS/150 VL/VB1/VBA/VBB/VD/VGLA/B/1/GL/Sprint/V/Rally/P80-150X/PX80-150 E 1°/P150S 1°/P200E 1°
Dimensions--> 4.0 mm, Ø 27.0mm, Øi 14 mm
Aluminum washer oil drain/fill plug
Small Parts Box -HÜNERSDORFF, Classic (225x335x55mm)- 24 compartments, blue
dimensions: 225 x 335 x 55 mm, 24 compartments, blue
transparent lid and base for optimal content viewing - compartment dimensions: 3= 52 x 52 x 45
Fiber washer for oil drain/fill plug
Thrust washer between bushing and clutch gear + 2.0mm for Vespa 125/150 VNB-VBB-Sprint-GT-GTR
Vespa 125/150 VNB-VBB-Sprint-GT-GTR
The +2.00mm shim is needed to install DRT clutch gears for PX on 125/150 VNB-VBB-Sprint-GT-GTR models
Cylinder head support washer MD Racing (Studs M7) for VESPA 50 - 90 - 125 PRIMAVERA - ET3 - PK 125 - PK 125 XL - PX 125/150 - PXE ARC. - GTR 125 - SUPER 150 - SPRINT VELOCE 150
VESPA 50 - 90 - 125 PRIMAVERA - ET3 - PK 125 - PK 125 XL - PX 125/150 - PXE ARC. - GTR 125 - SUPER 150 - SPRINT VELOCE 150
Stem shift washer for Vespa V1T>15T - V30T>33T - VU1T - VM1T>2T - VN1T>2T - VNA1T>2T - VNB1T>6T - VNC1T - VNL2T >78300 GT - VNL2T>124013 GTR - VL1T>3T - VB1T - VBA1T - VBB1T>2T - VBC1T >181686 - VS1T>5T
Vespa 125 V30>33T
Vespa 125 VM1>2T
Vespa 125 U VU1T
Vespa 125 VN1>2T
Vespa 125 VNA1>2T
Vespa 125 VNB1>6T
Vespa 125 Super VNC1T
Vespa 125 GT VNL2T >78300
Vespa 125 GTR VNL2T >124013
Vespa 150 GS VS1>5T
Vespa 150 VL1>3T
Vespa 160 GS VSB1T
Vespa 150 VB1T
Vespa 150 VBA1T
Vespa 150 VBB1>2T
Vespa 150 GL
Int.d 7.5mm Ext.d 16mm thickness 0.8mm
Vespa 50/90/125/150/160/200
internal diameter 13mm
external diameter 20mm
Complete sport RDV Race one seat in black with white stitching for Vespa 80/125/150/200 VNB-VBB-VBA-Super-Sprint-GT-GTR-GL-PX
Vespa 125 VNA1>2T
Vespa 125 VNB1>6T
Vespa 125 Super VNC1T
Vespa 150 VBA1T
Vespa 150 VBB1>2T
Vespa 125 GT VNL1>2T
Vespa 125 GTR VNL2T
Vespa 125 TS VNL3T
Vespa 150 Sprint VLB1T
Vespa 150 Super VBC1T
Vespa 150 GL VLA1T
Vespa 150 Sprint Veloce VLB1T
Vespa PX PE first series
The brand new "RDV race one" sport seat is a perfect blend of sporty aesthetics (white stitching, sporty seating, and harmony with Vespa curves) and good comfort (metal sheet base, 2.5 cm foam for seating), innovative magnetic closure to ensure maximum aesthetic result, entirely designed and created by our Staff, made possible thanks to the technical support of Nisa SRL. 100% MADE IN ITALY
Note: For PX/PE models, it fits perfectly ONLY with tanks having a wing nut cap.
For PX/PE Arcobaleno models with quick-release caps, it can be mounted by removing or lowering the central buffers provided (otherwise the central part touches before the rear part)
Central tunnel frame premium version (made in Italy) for Vespa 125/150/200 PX-PE VNX1T-VNX2T-VLX1T-VSX1T
Vespa 80 PX
Vespa 125 PX VNX1>T
Vespa 150 PX VLX1T
Vespa 200 PE VSX1T
Finish: Raw
It has holes for the PX Arcobaleno mat, which need to be closed to fit the first series PX.
Thermal Group Parmakit SIXTY SIX W-Force - Vespa ET3 - d66 175 cc
Thermal Group Parmakit SIXTY SIX
- Aluminum cylinder d.66 with nikasil liner
- Stroke 51 x connecting rod 110mm
- Forged single-segment steel piston
- Integral head with side spark plug hole
- Intake manifold d.37
- 8-petal reed valve with flow guide
DIAMETER: 66
DISPLACEMENT: 175
PIN: 16
STROKE: 51
CONNECTING ROD: 110
TRANSFER PORTS: 7
Complete brown saddle for Vespa PK50-125/S/XL/Plurimatic/Automatica/ETS
Vespa 50 PK Vespa 125 PK
Two-seater, sheet metal bottom, with lock and handle
EGIG Performance Intake Manifold 170/180/187 for Vespa 50-125 PK/S/XL/N/HP/FL2
Vespa 50-125 PK/S/XL/N/HP/FL2
🏁 Intake Manifold with Double-Cusped Reed Block (8 Petals)
Maximum responsiveness, increased torque, and optimized flow.
This intake system is designed to maximize the flow of fresh gases. The double-cusped reed block with 8 finned membranes (equipped with special plates for the 170cc configuration) ensures lightning-fast throttle response and a noticeable increase in torque from low revs.
The internal fluid dynamics have been studied to keep the duct as straight as possible: this straight-line design eliminates power losses and prevents annoying fuel stagnation or deposits inside the manifold.
📐 Technical Specifications and Dimensions
Reed Block: Double-cusped with 8 petals and special plates.
Internal Duct Diameter: 30 mm
Internal Sleeve Diameter (carburetor inlet): 35 mm
⚠️ Installation Notes
Frame Compatibility: On some types of frames, it may be necessary to slightly countersink or widen the passage hole on the well to ensure perfect alignment and freedom of movement for the manifold.
EGIG Performance Intake Manifold 170/180/187 for Vespa 50/90/125 Primavera ET3
Vespa 50/90/125 Primavera ET3
🏁 Intake Manifold with Double-Cusp Reed Pack (8 Petals)
Maximum responsiveness, increased torque, and optimized flow.
This intake system is designed to maximize the flow of fresh gases. The double-cusp reed pack with 8 finned membranes (equipped with special plates for the 170/180cc configuration) ensures a lightning-fast throttle response and a noticeable increase in torque right from low revs.
The internal fluid dynamics have been studied to keep the duct as straight as possible: this straight-line design reduces power losses to zero and prevents the annoying stagnation or deposit of fuel inside the manifold.
📐 Technical Specifications and Dimensions
Reed Pack: Double cusp with 8 petals and special plates.
Internal Duct Diameter: 30 mm
Internal Sleeve Diameter (carburetor inlet): 35 mm
⚠️ Installation Notes
Frame Compatibility: On some types of frames, it may be necessary to slightly countersink or widen the passage hole on the well to ensure perfect alignment and freedom of movement for the manifold.
Fabbri Racing full circle crankshaft 88 mm, cone 20, rod 117, stroke 54 for Vespa 50/90/125 Primavera-ET3-PK
Vespa 125 Primavera VMA1T>2T
Vespa 125 Primavera ET3 VMB1T
Vespa 125 PK S/XL/N/HP
Full Shoulder Crankshaft with 88 mm shoulders, 54 mm stroke, 117 mm connecting rod, and 20 mm taper.
requires casing boring
Vespa 50 V5A1T N,L,R, Vespa 50 Special V5A2>3T, Vespa 50 Special V5B1>4T, Vespa 50 PK S/XL, Vespa 125 Primavera VMA1T>2T, Vespa 125 Primavera ET3 VMB1T, Vespa 125 PK S/XL
Electronic ignition with variable advance 12v 90w
Fan color: Black
Original Piaggio rotary valve engine casing for Vespa 125/150 PX-Sprint-GT-GTR
Vespa 125 PX
Vespa 125 GT/GTR/TS
Vespa 150 PX
Vespa 150 Sprint Veloce
with mixer
with electric starter
rotary disc valve
3 transfers
Vespa 50 V5A1T R
Vespa 50 Special V5A2>3T
Vespa 50 Special V5B1>4T
Vespa 125 Primavera VMA2T
Vespa 125 Primavera ET3 VMB1T
Vespa 125 GT VNL2T
Vespa 125 GTR VNL2T
Vespa 125 TS VNL3T
6V alternating current
Complete 4-speed Pinasco gearbox for Vespa 125 VM1>2T-VN1>2T-VL1>3T-VB1T
Vespa 125 VM1T (Adaptable-adaptable)
Vespa 125 VM2T (Adaptable-adaptable)
Vespa 125 VN1T
Vespa 125 VN2T
Vespa 150 VL1T
Vespa 150 VL2T
Vespa 150 VL3T
Vespa 150 VB1T
Complete with multiple shaft, WITHOUT selector
For VM1>2T versions support and starting gear with bushing.
Gear teeth: 57-52-47-43
Multiple teeth: 13-18-23-27
Multiple bearing: 12x37x12
Clutch Basket Gear BGM PRO Z 23-67/68 for Vespa PX125-200 E Lusso '95-
Vespa 125 PX VNX2T from 1995
Vespa 125 PX ZAPM74100 2T AC `11
Vespa 125 PX Cat ZAPM50100 2T AC `07
Vespa 150 PX ZAPM74200 2T AC `11
Vespa 150 PX Millenium VLX1T 2T AC `98
Vespa 50/125 PK S/XL/N/HP/FL
Foam for seat model Camel for Vespa 50 N/L/R-Special- 90 V9A1T Vespa 125 Primavera VMA1/2T/ET3
Vespa 50 N/L/R-Special- 90 V9A1T Vespa 125 Primavera VMA1/2T/ET3
NIsa seat cover model Camel in black color for Vespa 50 N/L/R-Special- 90 V9A1T Vespa 125 Primavera VMA1/2T/ET3
Vespa 50 N/L/R-Special- 90 V9A1T Vespa 125 Primavera VMA1/2T/ET3
Vespa 50-125-150 LX
Cuppini luggage rack straps for our code 09-CW-010-CU Vespa 50 N/L/R-Special-90/125 Primavera ET3
Vespa 50 V5A1T N,L,R
Vespa 50 Special V5A2>3T
Vespa 50 Special V5B1>4T
Vespa 90 V9A1T
Vespa 125 Primavera VMA1T>2T
Vespa 125 Primavera ET3 VMB1T
Total Length------------> 30 cm
Thread Length------> 6 cm
Thread----------------------> M 6
Vespa 125 Super VNC1T
Vespa 150 Super VNC1T
Aluminum Color
3.50/8
M8 nuts and grover washers
Vespa PK 50 XL
Vespa PK 125 XL
Vespa PK 50 XL plurimatic
Vespa 50 Rush
Black anti-rust primer
Metal
Vespa 50 PK V5X2T
4-wire wiring (BT Box: Yellow, green, red, black/AT Coil: green, red, white)
Models without electric start and without turn signals
Cork tank cap gasket for Vespa 125 V1-33/VM/VN/VNA-TS/150 VL/VB/VBA-T4/GS VS1-5/160 GS/180 SS/Rally/P80-150X/PX80-200E/Lusso 1°/P150S/P200E
Vespa 125 from 1959 (excluding primavera ET3) Vespa 150 from 1959 Vespa 160 Vespa 180 Vespa 200
Thickness: 3 mm
MD RACING starter bump for Vespa 50 R 2°/S 2°/Special V5B3T 2°/SR 2°/90 2°/100/125 PV 2°/ET3 2°/PK50/S/SS/XL/2/FL/HP/Rush/PK80-125 S/PK125/ETS/N/XL/XL2
Vespa 50 V5A1T 893030>
Vespa 50 Special V5B3T 88658>
Vespa 90 V9A1T 141513>
Vespa 125 Primavera VMA2T 0148637>
Vespa 125 Primavera ET3 VMB1T 8091>
Vespa PK
Special bump rubber for Vespa 50, 90, 125 ET3 Primavera, PK starting sector
made of rubber resistant to both Synthetic and Mineral oils.
Measures 23×21.7x7mm optimized to properly fit the starter blade.
It is guaranteed not to dry out or break even under the heaviest stress.
The bump rubbers are designed to be compatible with the new
Modern crankcases available on the market for small frame Vespa.
Original Piaggio Fender Crest for Vespa 50 Special V5B3T/GTR/TS/Sprint V
Vespa 50 Special V5A2T
Vespa 50 Special V5A3T
Vespa 50 Special V5B1T
Vespa 50 Special V5B2T
Vespa 50 Special V5B3T
Vespa 125 GTR 127358 >
Vespa 125 TS VNL3T
Vespa 150 Sprint Veloce 172651 >
Mounting plates
Orig.Ref: 1247085
Complete light switch with aluminum support for Vespa 150 VL2T/VL3T
Vespa 150 VL2T/VL3T
Malossi Piston Ø 63.4 mm with two rectangular rings for Vespa 125 GTR 2°/TS/150 Sprint 2°/V/Super 2°/PX125-150/PE/Lusso/Cosa
Vespa 125 PX
Vespa 125 GT/GTR/TS
Vespa 150 PX
Vespa 150 Sprint Veloce
Ø 63.4mm
2 piston ring(s)
piston pin Ø 15mm
Kenda Tire 3.50/8 46 M K303 4P TL for Vespa 98/125 VM/VN/VL/VB1/VNB/VNA/VBB/Super
Vespa 98, Vespa 125 from 1948 to 1965, Vespa 150 from 1954 to 1966
Vespa 50 V5A1T N/L/R
Vespa 50 Special V5A2>3T
Vespa 50 Special V5B1>4T
Gray border