Retaining springs for Vespa
Kit 10 clutch springs -BGM PRO XL for BGM Pro Superstrong clutch Vespa 125/150/200 Sprint-S.Veloce-GT-GTR-TS-PX-PE
Vespa 125 VNB/GT/GTR/TS/PX
Vespa 150 VBB/GL/Sprint/Sprint Veloce/PX
Vespa 200 PE
The bgm PRO clutch springs are produced in Germany and are subject to continuous quality control. The material used, Oteva70®, makes the spring block stable and true to size. The spring does not deviate laterally until it is blocked, and once unloaded, it returns to its original length. The clutch spring retains all its elastic force. The spring rate is significantly narrower than that of an original spring. Ideal for high-performance engines.
Couple of spring plate with push rivets starting gear for Vespa VNA1T>2T - VNB1T>6T - VNC1T - VNL2T>145900 - VNL3T>18138 - VGLA1T - VGLB1T - VBA1T - VBB1T>2T - VBC1T>412373 - VLA1T - VLB1T>294259 - VSB1T - VSC1T - VSD1T - VSE1T>3399
Vespa VNA1T>2T - VNB1T>6T - VNC1T - VNL2T>145900 - VNL3T>18138 - VGLA1T - VGLB1T - VBA1T - VBB1T>2T - VBC1T>412373 - VLA1T - VLB1T>294259 - VSB1T - VSC1T - VSD1T - VSE1T>33996 - APE : AE01T>2T - AE1T>3T - AD1T>2T - PENTARO : APC1T>2T
All models
Clutch cover lever retaining spring 125 V1-TS/150 VL-Super/Rally/PX80-200/PE/Lusso/Cosa/T5
Vespa 125/150/160/180/200
In Burnished Steel
Ref. Orig. 046740
Kit of 8 reinforced clutch springs DRT for Vespa 125/150/200 Sprint-S.Veloce-GT-GTR-TS-PX-PE
Vespa 125 VNB/GT/GTR/TS/PX
Vespa 150 VBB/GL/Sprint/Sprint Veloce/PX
Vespa 200 PE
for our article: 07-BO-046-DT
Clutch cover lever retaining spring for Vespa 50/N/L/R 1°/S 1°/Special V5A2/V5B1/3/4T/SR/SS/90 1°/R/SS/100/125/PV 1°/ET3 1°
Ref.Orig: 078452
Starting bush spring pair for Vespa 98/125 V1>15T-V30>33T-VM1>2T-VN1>2T-150 VL1>3T-VB1T
Vespa 98
Vespa 125 V30>33T
Vespa 125 VM1T > VM2T
Vespa 125 VN1T>2T
Vespa 150 VL1T>3T
Vespa 150 VB1T
Vespa 150 GS VS1T>5T
Rear brake shoe spring for Vespa 50/90/125/Primavera/ET3/VNA/VNB/VBA/VBB/Rally/TS/Sprint-front/rear for Vespa PX/T5/PK/S/XL 180
Vespa 50
Vespa 90
Vespa 125 Primavera
Vespa 125 Primavera ET3
Vespa 125 VNB4T > VNB6T
Vespa 125 GT VNL2T
Vespa 125 GTR VNL2T
Vespa 125 Super VNC1T
Vespa 150 Super VBC1T
Vespa 150 VBB2T
Vespa 150 GL
Vespa 150 Sprint VLB1T
Vespa 150 Sprint Veloce VLB1T
Vespa 180 Rally VSD1T
Vespa 200 Rally VSE1T
Vespa PX (front and rear)
Vespa 125
Vespa 150
Vespa 200 PE (Front and rear)
Vespa PK 125 (Front and rear)
Vespa P 125 ETS
Steel
FB 36 clutch spring kit Fabbri Racing for Vespa 50 Special-N-L-R/90/125 Primavera ET3-PK-ETS
Vespa 50 V5A1T N,L,R
Vespa 50 Special V5A2>3T
Vespa 50 Special V5B1>4T
Vespa 50 PK
Vespa 50 PK XL
Vespa 90 V9A1T
Vespa 125 Primavera VMA1>2T
Vespa 125 Primavera ET3 VMB1T
Vespa 125 PK
For Fabbri racing clutches
Kit of 8 reinforced clutch springs DRT Vespa 125/150/200 Sprint-S.Veloce-GT-GTR-TS-PX-PE
Vespa 125 VNB/GT/GTR/TS/PX
Vespa 150 VBB/GL/Sprint/Sprint Veloce/PX
Vespa 200 PE
Compatible with our item: 07-BO-046-DT
Brake shoe return spring for Vespa VNL/TS/VLA/VLB/Rally/GS160/ /SS180/Sprint/V50/90/PV/ET3/SS
Vespa 50
Vespa 90
Vespa 125 Primavera
Vespa 125 Primavera ET3
Vespa 125 VNB4T
Vespa 125 VNB5T
Vespa 125 VNB6T
Vespa 125 Super VNC1T
Vespa 125 GT VNL1>2T
Vespa 125 GTR VNL2T
Vespa 125 TS VNL3T
Vespa 150 VBB2T
Vespa 150 Super VBC1T
Vespa 150 Sprint VLB1T
Vespa 150 Sprint Veloce VLB1T
Vespa 180 Rally VSD1T
Vespa 200 Rally VSE1T
Vespa PK
Vespa 125 V1T > V15T
Vespa 125 V30T > V33T
Vespa 125 VM1T
Vespa 125 VM2T
Vespa 125
Material: Steel
Vespa 50 V5A1T N,L,R
Vespa 90 V9A1T
Vespa 125 Primavera VMA1T>2T
Vespa 125 Primavera ET3 VMB1T
Vespa PK E PK XL 50-125
Ref. Orig. 078478
Vespa 125 Cosa VNR1T
Vespa 125 Cosa 2 VNR2T
Vespa 150 Cosa VLR1T
Vespa 150 Cosa 2 VLR2T
Vespa 200 Cosa VSR1T
Dimensions--> L=95 mm, Ø 10 mm
Elastic gear spring kit -FABBRI RACING- for Vespa 50/125 Special-Primavera-ET3
Vespa 50 V5A1T N,L,R
Vespa 50 PK
Vespa 90 V9A1T
Vespa 125 Primavera VMA1>2T
Vespa 125 Primavera ET3 VMB1T
These springs act as dampers in the primary transmission. They are used to protect the gearbox even with very high torque engines. The stronger springs maintain a residual stroke even under heavy loads compared to standard springs. Load peaks are thus absorbed and not transmitted to the gearbox. Despite the harder springs, the gearbox is effectively protected, and the gearbox and all other transmission components will thank you with a long service life.
Diameter Ø11.20mm
Length: 29.90mm
Wire thickness: Ø 2.00mm
Scope of delivery: 4 springs (set) suitable for one primary
Suitable for: All Vespa Smallframe primary reductions with snap dampers ex works (all over 50cc)
Rear brake shoe cam retaining spring Vespa 125 V1-TS/150 VL-Super/Rally/PX80-200/PE/Lusso/Cosa/T5
Vespa 125/150/160/180/200
In Burnished Steel
Ref. Orig. 078521
Clutch bush for Vespa PX125-200 E Lusso `95-> /`98/MY/`11/Cosa 2
Vespa 125 Cosa VNR1T
Vespa 150 Cosa 2 VLR1T
Vespa 200 Cosa 2 VSR1T
Vespa 125 PX 2011 ZAPM74100
Vespa 150 PX 2011 ZAPM74200
Vespa 125 PX VNX1T Millennium
Vespa 150 PX VLX1T Millennium
Vespa 125/150/200 COSA 1
Vespa 125/150/200 WHAT
l=25 mm, Ø 13 mm, d=1.8 mm
Reinforced clutch spring kit (8 pieces) for Vespa PX125-200 E Lusso `95-> /`98/MY/`11/Cosa 2
Vespa 125 Cosa VNR1T
Vespa 150 Cosa 2 VLR1T
Vespa 200 Cosa 2 VSR1T
Vespa 125 PX 2011 ZAPM74100
Vespa 150 PX 2011 ZAPM74200
Vespa 125 PX VNX1T Millennium
Vespa 150 PX VLX1T Millennium
Starter gear spring for 125 Vespa V1-TS/150 VL-Super/Rally/PX80-200/PE/Lusso/Cosa/T5
Vespa 125 VNA1>2T
Vespa 125 VNB1>6T
Vespa 125 Super VNC1T
Vespa 125 GT VNL1>2T
Vespa 125 GTR VNL2T
Vespa 125 TS VNL3T
Vespa 150 VBA1T
Vespa 150 VBB1>2T
Vespa 150 GL VLA1T
Vespa 150 Sprint VLB1T
Vespa 150 Sprint Veloce VLB1T
Vespa 160 GS VSB1T
Vespa 180 SS VSC1T
Vespa 180/200 Rally
Vespa PX/PE
Vespa 160 GS VSB1T
Vespa 180 SS VSC1T
Vespa 50 PK FL V5N1T
Vespa 50 PK HP V5N2T
Vespa 125 N (FL) VMX7T
In Burnished Steel
Hai visualizzato 23 di 23 prodotti
