Vespa 150 Super VBC1T
Complete thermal group Pinasco (177 cc) in cast iron with two transfer ports for Vespa 125 VNB1>6T, Vespa 125 GT VNL1>2T, Vespa 125 GTR VNL2T, Vespa 150 VBB1>2T, Vespa 150 GL VLA1T, Vespa 150 Sprint VLB1T
Vespa 125 VNB1>6T, Vespa 125 GT VNL1>2T, Vespa 125 GTR VNL2T, Vespa 150 VBB1>2T, Vespa 150 GL VLA1T, Vespa 150 Sprint VLB1T
Brand: Pinasco
Bore: 63
Displacement: 177 cc
Piston d.63 A 63.4 for complete thermal group Pinasco (177 cc) in cast iron since 2015 for Vespa 125 VBA/VBB/VNB-150 VBA/PX
Vespa 125 VNB1>6T, Vespa 125 GT VNL1>2T, Vespa 125 GTR VNL2T, Vespa 150 VBB1>2T, Vespa 150 GL VLA1T, Vespa 150 Sprint VLB1T, Vespa PX
Pinasco airbox purifier cover for Vespa 125 VNB-TS/150 VBA -Super/Rally/P80-150X/P200E /PX80-200E/Lusso/T5
Vespa 125 VNB-TS/150 VBA-Super/Rally/P80-150X/P200E/PX80-200E/Lusso/T5
In plastic, 20% more volume, suitable for models WITHOUT mixer
High-performance synthetic lubricant specifically for 2-stroke engines, keeps rings and pistons clean thanks to optimal combustion.
1 Lt package
Pinasco high-speed crankshaft bearing (oversized +0.04mm) for Vespa 125/150 VM-VN-VNA-GT-GL-TS-VL-VBA-VBB-VB1-Sprint-PX
Vespa 125 from 1953
Vespa 150 from 1954
Vespa 160
Vespa 180
Vespa PX
Vespa PE
Dimensions: 25x62x12 mm
Clutch slider for Vespa 125/150 VNB-GT-GTR-TS-PX-VBB-GL-Sprint-Sprint Veloce
Vespa 125 (Excluding primavera ET3)
Vespa 150
Vespa 160
Vespa 180
Vespa 200
All Models
Mounting in place of the bearing on soft support
Vespa 125 (all except Primavera ET3)
Vespa 150
Vespa 160
Vespa 180
Vespa 200
Tightening with 14 mm wrench
Vespa 125 VNB/GT/GTR/TS/PX
Vespa 150 VBB/GL/Sprint/Sprint Veloce/PX
Vespa 200 PX/Rally/Cosa
Kit Consists of: Reinforced springs and perforated cups.
Helical gear clutch group Z 23 (6 springs) on primary Z67/68 for Vespa 125/150 VNB-GT-GTR-TS- VBB-GL-Sprint -PX
Vespa 125 VNB/GT/GTR/TS/VBB/GL/Sprint/Sprint Veloce (required 07-DH-105-DR)
Vespa 125/150 PX
Diameter: 97 mm
height: 34 mm
PINASCO unit conversion from points to electronic for Vespa 50 N/L/R-Special-125 Primavera/Sprint-Super-GT/GTR/TS/Rally/SS/LML
Models with points ignition
For conversion to electronic ignition
Pinasco has developed a control unit that converts engines with point ignition into engines with electronic ignition without having to replace the original components. By removing the capacitor and connecting the control unit in parallel with the original high voltage coil, it is possible to perform the conversion without invasive modifications to the engine or the electrical system; the points are not removed, they become the pick-up signal.
Vespa 125/150/200
For SI 20-24 carburetors
This cover is modified by enlarging the fuel passages, thus reducing the annoying emptying of the bowl (which normally occurs with 177cc and 225cc modifications), reducing the risk of seizing.
High-speed crankshaft bearing kit Pinasco for Vespa 125/150 VM-VN-VNA-VNB-GT-GL-TS-VL-VBA-VBB-VB1-Sprint-PX
Vespa 125 from 1953
Vespa 150 from 1954
Vespa 160
Vespa PX
Vespa PE
Measurements: 25x62x12 mm 2 pieces
Clutch Disc Kit with 6 Springs Pinasco for Vespa 125/150 VNB-GT-GTR-TS-PX-VBB-GL-Sprint-Sprint Veloce
Vespa 125 VNB/GT/GTR/TS/PX
Vespa 150 VBB/GL/Sprint/Sprint Veloce/PX
Kit Composed of: 4 Cork and steel discs, reinforced springs with perforated cups.
Engine gasket kit PINASCO for PINASCO "Master/Slave" casings for Vespa 125 VNA-TS/150 VBA-Super/160 GS/180 SS/Rally/PX80-200/PE/Lusso/T5
Vespa 125 VNA-TS/150 VBA-Super/160 GS/180 SS/Rally/PX80-200/PE/Lusso/T5
Pinasco SI 26/26 Carburetor for Vespa 125 VNB/GT/GTR/TS/PX-150 VBB/GL/SPRINT/V/PX-200 RALLY-PE
Vespa 125 GT VNL2T
Vespa 125 GTR VNL2T
Vespa 125 TS VNL3T
Vespa 125 PX
Vespa 150 Sprint VLB1T
Vespa 150 Sprint Veloce VLB1T
Vespa 150 PX
Vespa 200 PE
Pinasco SI 26/26 MIX Carburetor for Vespa 125 VNB/GT/GTR/TS/PX-150 VBB/GL/SPRINT/V/PX-200 RALLY-PE
Vespa 125 GT VNL2T
Vespa 125 GTR VNL2T
Vespa 125 TS VNL3T
Vespa 125 PX
Vespa 150 Sprint VLB1T
Vespa 150 Sprint Veloce VLB1T
Vespa 150 PX
Vespa 200 PE
Power Clutch Kit 6 Springs Pinasco for Vespa 125/150 VNB-GT-GTR-TS-PX-VBB-GL-Sprint-Sprint Veloce
Vespa 125 VNB/GT/GTR/TS/PX
Vespa 150 VBB/GL/Sprint/Sprint Veloce/PX
Kit Composed of: Reinforced and tempered basket, cork and steel discs, reinforced springs with perforated cups + clutch slider spring holder
DELL'ORTO spring, carburetor valve SI 24-26 E/G/H for Vespa 125 VNB/GT/GTR/TS/PX-150 VBB/GL/SPRINT/V/PX-200 RALLY-PE
Vespa 125 GT VNL2T
Vespa 125 GTR VNL2T
Vespa 125 TS VNL3T
Vespa 125 PX
Vespa 150 Sprint VLB1T
Vespa 150 Sprint Veloce VLB1T
Vespa 150 PX
Vespa 200 PE
Pinasco Carburetor 26/26 VRX-R with filter and trumpet for Vespa 125 VNB/GT/GTR/TS/PX-150 VBB/GL/SPRINT/V/PX-200 RALLY-PE
Vespa 125 GT VNL2T
Vespa 125 GTR VNL2T
Vespa 125 TS VNL3T
Vespa 125 PX
Vespa 150 Sprint VLB1T
Vespa 150 Sprint Veloce VLB1T
Vespa 150 PX
Vespa 200 PE
Racing Version
Vespa 125 from 1953
Vespa 150 from 1954
Vespa 160
Vespa 180
Vespa PX
Vespa PE
Dimensions: 25x62x12 mm
Main feature: Polyamide cage that reduces ball friction
Pinasco shock absorber starter buffer for Vespa 125 VNA-TS/150 VBA-Super/160 GS/180 SS/Rally/PX80-200/PE/Lusso/T5/Cosa
Vespa 125 (excluding Primavera ET3)
Vespa 150
Vespa 160
Vespa 180
Vespa 200
Complete clutch Pinasco Racing Bull Clutch for Vespa PX125/150/200 E '95->/'98/MY/'11/Cosa 2
Vespa 125 VNB/GT/GTR/TS/PX
Vespa 150 VBB/GL/Sprint/Sprint Veloce/PX
Vespa 200 PE
Reinforced basket, 12 springs (with different hardnesses to configure the product according to your needs), 4 cork discs, 4 metal discs, fully machined dovetail engagement system. Tested on engines up to 38 HP.
Attention: for installation on 125/150 engines, some "ribs" of the casting on the cover and crankcase must be shaved.
All models / All models
Synthetic oil specifically designed for 2-stroke engines with wet clutches, ensures smooth and precise gear shifts while preserving the wear of gears and clutch discs. The excellent viscometric characteristics prevent the sticking of discs when cold and gear wear when hot.
SAE 30 Formula, 1-liter package
Pinasco stator for Vespa large frame 125/150/180/200 VBA-VBB-VNB-Sprint-GT-GTR-PX
Vespa 125 VNA1>2T
Vespa 125 VNB1>2T
Vespa 125 GT VNL2T
Vespa 125 GTR VNL2T
Vespa 150 VBA1T
Vespa 150 VBB1>2T
Vespa 150 Sprint VLB1T
Vespa 150 GL VLA1T
Vespa 180/200 Rally
Vespa PX-PE
Pinasco ignition bracket for Vespa large frame 125/150/180/200 VBA-VBB-VNB-Sprint-GT-GTR-PX
Vespa 125 VNA1>2T
Vespa 125 VNB1>2T
Vespa 125 GT VNL2T
Vespa 125 GTR VNL2T
Vespa 150 VBA1T
Vespa 150 VBB1>2T
Vespa 150 Sprint VLB1T
Vespa 150 GL VLA1T
Vespa 180/200 Rally
Vespa PX-PE
Complete with small hardware
Vespa 50/90125/150/160/180/200
Vespa 50/90125/150/160/180/200
Pinasco Sparkey electronic control unit for Vespa 125/150/200 Sprint-S.Veloce-GT-GTR-TS-PX-PE-Rally
Vespa 125/150/200 Sprint-S.Veloce-GT-GTR-TS-PX-PE-Rally
The new Pinasco "Sparkey" control unit is
made with the best electronic components available on the market,
it has an internal high-performance charge and discharge circuit that
significantly increases the spark of the spark plug even at the lowest engine
speed. Winner with the Pinasco Team of the 10H
of Magny Cours 2017 in the Large category and the Spring Race 12H 2018
in the Small Frame Proto and Large Frame categories, it has proven to
increase the vehicle's performance while maintaining
reliability.
Note--> Warning compatible ONLY with Pinasco Flytech ignitions.
Vespa 50-125/PV/ET3/PK50-125/S/125 V15-33/VM/VN/VNA/VNB/GT/GTR/Super/TS/150 VL/VB/ACMA/GS/VBA/VBB/T4/GL/Sprint/Super/200 Rally 2°/PX80-200/PE/Lusso/Cosa/T5 Classic
Vespa 50/90/125/160/180/200
2nd Gear Pinasco Long (40 teeth) for Vespa 125/150/200 PX-PE-Sprint V-Rally-TS-GTR
Vespa 125/150/200 PX-PE-Sprint V-Rally-TS-GTR
Made of alloy steel specific for gears, the Pinasco LONG SECOND Z40 is extremely durable and quiet, allowing you to correct the spacing of the Vespa PX gearbox by bringing the 2nd closer to the 3rd gear. The absence of holes or grooves prevents oil emulsification during rotation.
The Pinasco LONG SECOND Z40 fits all existing rainbow gearboxes on the market and, combined with Pinasco clusters, optimizes the shift between gears, enhancing the driving experience.
Sella sport Pinasco di colore nero cuciture gialle per Vespa 80/125/150/200 VNB-VBB-VBA-Super-Sprint-GT-GTR-GL-PX
Vespa 125 VNA1>2T
Vespa 125 VNB1>6T
Vespa 125 Super VNC1T
Vespa 150 VBA1T
Vespa 150 VBB1>2T
Vespa 125 GT VNL1>2T
Vespa 125 GTR VNL2T
Vespa 125 TS VNL3T
Vespa 150 Sprint VLB1T
Vespa 150 Super VBC1T
Vespa 150 GL VLA1T
Vespa 150 Sprint Veloce VLB1T
Vespa PX PE prima serie
Pinasco ha realizzato una sella sportiva specifica per tutte le Vespa Large Frame, dal 1960 ai giorni nostri.
Il design moderno è impreziosito da cuciture gialle di alta qualità, che richiamano il logo Pinasco stampato sul retro. La copertura in materiale antiscivolo e l’imbottitura estremamente soffice garantiscono un comfort senza eguali, anche nei lunghi tragitti.
Il codino posteriore tronco si integra perfettamente con il design delle Vespa degli anni '60, così come con i modelli degli anni ’70 e ’80. Le curve laterali, seguendo con eleganza il perimetro del telaio, rendono la linea complessiva più snella e armoniosa.
La nuova sella Pinasco è un prodotto di design, ma allo stesso tempo funzionale, morbido e confortevole. Può inoltre essere montata anche sui veicoli dotati di miscelazione separata.
Vespa 125 GT VNL2T
Vespa 125 GTR VNL2T
Vespa 125 TS VNL3T
Vespa 125 PX
Vespa 150 Sprint VLB1T
Vespa 150 Sprint Veloce VLB1T
Vespa 150 PX
Vespa 200 PE
Brand new Pinasco SI 28 VRX-R carburetor with recalculated intake trumpet made from solid material, optimizes performance to the maximum even at low revs, complete with volumetric sponge.
Rear shock absorber Pinasco for Vespa 50/90/125/150/160/180/200 N-L-R-Special-Primavera-GT-GTR-Sprint-Rally-PX-PE
Vespa 50 V5A1T N,L,R
Vespa 50 Special V5A2>3T
Vespa 50 Special V5B1>4T
Vespa 90 V9A1T
Vespa 125 Primavera VMA1T>2T
Vespa 125 Primavera ET3 VMB1T
Vespa 125 VNB4T 114714 >
Vespa 125 Super VNC1T
Vespa 125 GT VNL2T
Vespa 125 GTR VNL2T
Vespa 125 TS VNL3T
Vespa 125 PX
Vespa 150 VBB2T 172370 >
Vespa 150 GL VLA1T
Vespa 150 PX
Vespa 150 Sprint VLB1T
Vespa 150 Sprint Veloce VLB1T
Vespa 180 Rally VSD1T
Vespa 200 Rally VSE1T
Vespa
Double-acting oleo-pneumatic shock absorber with spring preload
adjusted by millimeter aluminum ring nut, calibrated harmonic steel spring.
Body: black, spring black
Pinasco touring classic 2.0 exhaust for Vespa 125/150 VNB-GT-GTR-TS-Sprint-GL-PX
Vespa 125 VNA1>2T
Vespa 125 VNB1>6T
Vespa 125 GT/GTR/TS/Super
Vespa 125 PX
Vespa 150 VBA1T
Vespa 150 VBB1>2T
Vespa 150 Sprint/GL/Super
Vespa 150 PX
Painted in black
The PINASCO TOURING exhaust has been designed to enhance the engine's performance both at low and high revs while maintaining the same level of quietness. The innovative design that "breaks away from all current patterns" has been studied to achieve the right gas expansion that allows for a significant increase in engine performance (about 4HP) even in extension.
All models
Useful accessory for turning cylinder heads. Suitable for any type of head.
Pinasco crankshaft with advanced timing (60 mm stroke, 105 mm connecting rod) for Vespa 125/150 PX
Vespa 125 PX VNX1>2T
Vespa 125 PX ZAPM 74100
Vespa 125 TS VNL3T 18139>
Vespa 125 GTR VNL2T 145901>
Vespa 125 Cosa VNR1T
Vespa 150 Cosa VLR1T
Vespa 150 Sprint Veloce VLB1T 294260>
Vespa 150 Super VBC1T 412374>
Vespa 150 PX 2011 ZAPM 74200
Pinasco base gasket thickness of 1.5 mm for modifying the Pinasco 177cc aluminum cylinder from three to two ports for Vespa 125 VBA/VBB/VNB-150 VBA/VBB/GL/Sprint
Vespa 125 VBA/VBB/VNB-150 VBA/VBB/GL/Sprint
Primary couple with extended ratio Pinasco (Z 23/65) for Vespa 125/150 VNB-GT-GTR-TS-PX-VBB-GL-Sprint-Sprint Veloce
Vespa 125 PX, Vespa 125 TS, Vespa 150 PX, Vespa 150 Sprint Veloce
Included: Shock absorbers
Z 23-65 with helical teeth
Pinasco 2.0 forged clutch bell for Vespa 125/150 VNB-GT-GTR-TS-PX-Sprint-GL
Reinforced with a special steel ring carefully welded onto the outer petals of the clutch.
The stops of the discs are hardened and subsequently burnished.