RDV Scootershop

Vespa 150 VL2T

Filtri
there are 36 products
chiudi
there are 36 products
You are filtering for:
  • BGM
  • Vespa 150 VL2T
Model
Request more info
I have read and accept the use of my data according to the disclosure of privacy. Read Privacy Policy.
accept
Fields with an * (asterisk) are required
thank you

Your request has been successfully forwarded to the staff, you will be contacted as soon as possible.

Modellino
Parti
    Modellino
    Parti
      Modellino
      Parti
        there are 36 products
        -5% BGM PRO crankshaft bearing and oil seal kit FKM/Viton® (E10/ethanol resistant) for Vespa 125/150 VM/VN/VL/VB1T/VNA/GS
        Available
        Compatibility

        Vespa 125/150 VM/VN/VL/VB1T/VNA/GS

        technical specifications

        WIDE FRAME ENGINE ISSUE: The BGM Pro and Corteco oil seals, of much higher quality, are available (for safety reasons) only with a 0.8 mm sheet metal coating. If installed in a wide frame engine, the crankshaft bearings deform, causing damage to the bearings.

        WIDE FRAME ENGINE SOLUTIONS: The circumferential bead of the oil seal is flattened, reducing the height of the oil seal plate by approximately 0.3 mm. The bearings then move freely. b) The BGM Pro bearing set with special FAG 9-ball bearings. In this case, the bearing shoulders have been precisely machined to ensure stress-free mounting of the crankshaft bearing. The set includes high-quality, durable BGM Pro FKM/Viton® oil seals.

        Approfondisci
        Shipping time
        24/48 hours
        79,47 € 84,00 €
        65,14 € VAT excluded
        1 point RDV = 2 cents 79 points RDV = 1,58 € cashback
        Trolley extension for motorcycle mover (rear wheel) -BGM PRO- Vespa Smallframe/Largeframe/Wideframe V50-V90-ET3-PK-PX-T5-Rally-Sprint-GT-GTR-SS180-GL-Super-GS160-VNA-VNB-VBA-VBB-V1-V15-V30-V33
        Available
        Compatibility

        Vespa Smallframe, largeframe, wideframe

        technical specifications

        Brilliant extension for maneuvering assistance by BGM PRO for all classic
        Vespa and Lambretta scooters. With the addition for the rear wheel, the
        vehicle can be turned on the spot. This way, the scooter can be stored
        well and safely even in the smallest corner and can be easily removed
        again. All this without any effort.

        Approfondisci
        79,99 €
        65,57 € VAT excluded
        1 point RDV = 2 cents 79 points RDV = 1,58 € cashback
        -5% BGM Pro Touring Exhaust for Vespa 125VM1>2T/VN1>2T-150 VL1>3T-VB1T
        low availability
        Compatibility

        Vespa 125VM1>2T/VN1>2T-150 VL1>3T-VB1T

        technical specifications

        The new BGM Pro Touring muffler is a real wolf in sheep's clothing: a powerful sports exhaust that perfectly blends into the unobtrusive design of a standard exhaust. Thanks to the innovative design of the BGM PRO Touring Box, with the flat diffuser opening angle and moderate resonance length, it optimally adapts to different cylinder concepts. The result? A wonderful touring machine that moves with great thrust right from low revs.
        Perfect on tuning cylinders like BGM150, Pinasco160, or CC Corsa 160/175

        Approfondisci
        208,91 € 219,90 €
        171,23 € VAT excluded
        1 point RDV = 2 cents 208 points RDV = 4,16 € cashback
        -4% Crankshaft -BGM PRO, direct intake, stroke = 57mm, connecting rod = 110mm- Vespa Wideframe VM1T, VM2T, VN1T, VN2T, Vespa 150 VL1T, VL2T, VL3T, VB1T, ACMA 125 (1954-1955), ACMA 150GL (1956-1958), Motovespa 125N (1956-1958) - Piston Ø15mm
        Available
        Compatibility

        Vespa 125 VM1T>VM2T

        Vespa 125 VN1T>2T

        Vespa 150 VL1T>VL3T

        Vespa 150 VB1T

        technical specifications

        BGM PRO crankshaft for Vespa Wideframe made with high-alloy forged blanks. Ideal in combination with the BGM PRO 150cc Wideframe tuning cylinder.

        The crankshaft has been designed as a heavy tuning crankshaft, but it is also clearly recommended as a practically indestructible shaft for original engines.

        Stroke: 57 mm
        Connecting rod length: 110 mm
        Piston pin: Ø15 mm
        Connecting rod bearing: needle bearing (upper and lower)

        One of the main advantages of the BGM PRO crankshaft compared to the original one is the use of a high-quality connecting rod with needle bearing (instead of a simple bearing bushing) and a slotted lower connecting rod eye. This greatly reduces the oil requirement, so that the engines can run smoothly even with a 1:50 mixture with current high-quality oils.

        The balance factor has been improved, among other things, thanks to a hollow crank pin.

        The crankshaft is suitable for all 125 and 150 cc engines. The 125 cc engines only have a stroke of 54 mm, so a cylinder designed for a stroke of 57 mm (BGM155

        Approfondisci
        Shipping time
        24/48 hours
        215,00 € 225,00 €
        176,23 € VAT excluded
        1 point RDV = 2 cents 215 points RDV = 4,30 € cashback
        -2% Cylinder -BGM PRO 150 cc, wide frame, Faro Basso, Ø=57mm, stroke=57mm- Vespa 1953-1959, VM, VN, ACMA (from engine V55), VB1T, VGL1T, VL1T
        Available
        Compatibility

        Vespa 125 VM1T>VM2T
        Vespa 125 VN1T>VN2T
        Vespa 150 VL1T>VL3T

        technical specifications

        BGM PRO cylinder with 150cc and 57 mm stroke suitable for all 2-channel engines. The grey cast iron cylinder has three transfer ports and is suitable for all wide frame engines with a 57 mm stroke. The cylinder with a 57 mm crankshaft also fits 125 cc engines with a 54 mm stroke without any issues. The third port of the cylinder is sealed with an aluminum spacer for the foot gasket, supplied, and the cylinder is evacuated via a corresponding cut in the piston. This means that no modifications to the engine housing are necessary.

        Displacement: 150 cc
        Stroke: 57 mm
        Piston: Ø = 57 mm
        Piston rings: 2 x 1.5 mm
        Cylinder material: Cast iron
        Cylinder head: CNC machined from solid aluminum with additional cooling fins at the bottom
        Ports: 3
        Spark plug: short thread (e.g., NGK B8HS, Bosch W3AC)
        Ignition timing: 18-19°
        The cylinder gives very old Vespas significantly more pulling power and top speed. Rapid acceleration, even by today's standards, is the specialty of the BGM PRO 150

        Approfondisci
        359,00 € 365,00 €
        294,26 € VAT excluded
        1 point RDV = 2 cents 359 points RDV = 7,18 € cashback
        BGM rubber sleeve (d. 35-40) for Vespa 50/90/125/150/200 Special-N-L-R-PK-PX-Sprint-GL-TS
        low availability
         
        16,90 €
        13,85 € VAT excluded
        1 point RDV = 2 cents 16 points RDV = 0,32 € cashback
        -8% Complete BGM Pro SC Competition Shock Absorber in Silver for Vespa 125 VM1 You are trained on data up to October 2023.
        Available
        Compatibility

        Vespa 125 V30T > V33T (adaptable)
        All models from '53 to '79
        Excluding 125 Primavera ET3,PK;PX,PE

        technical specifications

        The BGM PRO SC Competition front shock absorber is an evolution of the successful BGM PRO F16 Sport series. Externally, the Competition series is distinguished by the external reservoir. It has a modified base adjustment and is therefore very suitable when used with stiff sport springs. The compression/rebound adjustment prevents diving or rapid extension on rough roads. Thanks to these features, the shock absorber is an excellent replacement
        even for more powerful vehicles. The wide adjustability clearly allows the shock absorber to be used with standard springs as well, ensuring maximum comfort during driving.

        Approfondisci
        Shipping time
        24/48 hours
        180,00 € 195,65 €
        147,54 € VAT excluded
        1 point RDV = 2 cents 180 points RDV = 3,60 € cashback
        -5% BGM Classic Tire 3.50/8 46P 150 km/h for Vespa 98/125 VM/VN/VL/VB1/VNB/VNA/VBB/Super
        Available
        Compatibility

        Vespa 98
        Vespa 125 from '48 to '65
        Vespa 150 from '54 to '66

        technical specifications

        3.50/8
        Black

        Approfondisci
        Shipping time
        24/48 hours
        49,40 € 52,00 €
        40,49 € VAT excluded
        1 point RDV = 2 cents 49 points RDV = 0,98 € cashback
        Compass wrench for rear wheel bearing nut-BGM PRO Øi=28mm/35mm, Øpitch=37mm/43mm, 4-pin- Vespa Wideframe 98/125/150cc V98,V1T-15T, V30T-33T, Hoffmann HA/HB, VM,VN, VL, VB, VGL, VD, GS150, Piaggio APE A1T-15T, AB1T-4T, AC, APA,
        Available
        Compatibility

        Vespa Wideframe 98/125/150cc V98, V1T-15T, V30T-33T, Hoffmann HA/HB, VM,VN, VL, VB, VGL, VD, GS150, Piaggio APE A1T-15T, AB1T-4T, AC

        technical specifications

        Special tool BGM pro for the rear wheel bearing nut of all Vespa Wideframe models.

        Thanks to its intelligent design, this tool can be used for both hole sizes (Ø37+43mm). It offers the possibility to preload the tool on the nut to be loosened. Thanks to the identical thread pitch of the tool and the nut, the preload is fully maintained during loosening, making slipping impossible.

        Approfondisci
        Shipping time
        24/48 hours
        37,90 €
        31,07 € VAT excluded
        1 point RDV = 2 cents 37 points RDV = 0,74 € cashback
        BGM PRO Faster Flow Fuel Tap V2.0
        Available
        Available
        12-DI-016-SC
        12-DI-016-SC

        BGM PRO Faster Flow Fuel Tap V2.0

        Compatibility

        Vespa 50/90/125/150/160/180/200

        Approfondisci
        Shipping time
        24/48 hours
        19,99 €
        16,39 € VAT excluded
        1 point RDV = 2 cents 19 points RDV = 0,38 € cashback
        Nut and washer clutch assembly BGM PRO for Vespa PX, Rally180 (VSD1T), Rally200 (VSE1T), Sprint, T5 125cc, Cosa1
        Available
        Compatibility

        Vespa 125 (all except Primavera ET3)
        Vespa 150
        Vespa 160
        Vespa 180
        Vespa 200

        technical specifications

        M12 x 1.50 collar Ø:18.6mm h:9mm
        key opening:15

        Approfondisci
        Shipping time
        24/48 hours
        9,80 €
        8,03 € VAT excluded
        1 point RDV = 2 cents 9 points RDV = 0,18 € cashback
        -11% RDV choice Cable sleeve -5 meters- color gray Ø=6mm
        Available
        Available
        07-FC-011-IR
        07-FC-011-IR

        Cable sleeve -5 meters- color gray Ø=6mm

        Compatibility

        All models

        Approfondisci
        Shipping time
        24/48 hours
        7,90 € 8,90 €
        6,48 € VAT excluded
        1 point RDV = 2 cents 7 points RDV = 0,14 € cashback
        -6% BGM PRO SC/R1 SPORT shock absorber in Black, 385 mm complete for Vespa 125 VN1T 6001>/VN2T-VL1>3T-GS150 VS1>5T
        Available
        Compatibility

        Vespa 125 VM1>2T
        Vespa 125 VN1T
        Vespa 125 VN2T
        Vespa 150 VL1>3T
        Vespa 150 VB1T
        Vespa 150 GS VS1>4T
        Vespa 150 GS VS5T Export models
        Adaptable Vespa 150 GS VS5T

        technical specifications

        The BGM Pro SC SPORT shock absorber is designed for Vespa with a wide frame, such as the VM, VN, VB, VL, and GS150 models. It is a sporty, comfortable, and adjustable product with TÜV certification. The spring preload is continuously adjustable and the shock absorber is pre-configured at the factory.

        Suitable as a direct replacement for models from 1955 to 1954 inclusive, the spring and shock absorber are separate. For later models, an upper shock absorber mount is available, sold separately, which allows use also on vehicles prior to 1955. Two specific screw adapters (M8 and M9) for each model are included. The shock absorber is adjustable in length between 385 and 420 mm.

        Made of high-strength aluminum and CNC machined, it has hard anodized surfaces for optimal protection and long-lasting durability. Its sporty and harmonious design ensures excellent on-road performance. The suspension reduces dive during braking and roll during acceleration, improving handling and stability.

        The shock absorber has KBA and ABE test markings, with a very competitive quality/price ratio. The technology used comes from the BGM Pro SC COMPETITION shock absorber, with an anodized body

        Approfondisci
        259,00 € 276,89 €
        212,30 € VAT excluded
        1 point RDV = 2 cents 259 points RDV = 5,18 € cashback
        Anti-rattle exhaust spring BGM 55mm
        Available
        Available
        07-CH-103-IR
        07-CH-103-IR

        Anti-rattle exhaust spring BGM 55mm

         
        Shipping time
        24/48 hours
        3,20 €
        2,62 € VAT excluded
        1 point RDV = 2 cents 3 points RDV = 0,06 € cashback
        -6% BGM Pro Sport brake caliper (with TÜV certificate) - 4 pistons, radial mounting (adapter required) in black color for Vespa 50-125/​PV/​ET3/​PK/​S/​SS/​XL/​XL2/​125 VNA -TS/​150 VBA-Super/​Rally/​PX/​PE/​T5/​Cosa
        Available
        Compatibility

        Vespa 50-125/​PV/​ET3/​PK/​S/​SS/​XL/​XL2/​125 VNA -TS/​150 VBA-Super/​Rally/​PX/​PE/​T5/​Cosa

        technical specifications

        BGM PRO Radial Brake Caliper with 4 Pistons - Made in Italy (TÜV Approved)

        The renowned BGM Pro radial brake caliper with 4 pistons has been completely redesigned and improved. Produced entirely in Italy, this new version boasts an optimized bleeding system that makes maintenance operations faster and easier than before. Combining elegant design with maximum functionality, BGM Pro offers a caliper that guarantees braking power, safety, and durability over time.

        The BGM Pro Sport caliper offers a braking surface superior by about 28% compared to standard two-piston calipers (typical of Vespa PX or LML Star). The technical advantages translate into:

        ✅ Greater braking power: More decisive deceleration and reduced stopping distances.
        ✅ Improved feel: Optimized hydraulic transmission ratio for precise modulation.
        ✅ Even wear: Pressure distributed over 4 points ensures uniform contact between pads and disc.
        ✅ Quick maintenance: Pad replacement facilitated by the two-ring fastening system.
        Technical Compatibility

        Mounting: Radial for supports with hole spacing of 82 mm.
        Adaptability: Also compatible with supports from other brands (e

        Approfondisci
        Shipping time
        24/48 hours
        146,33 € 155,90 €
        119,94 € VAT excluded
        1 point RDV = 2 cents 146 points RDV = 2,92 € cashback
        Pair of oil fill/drain plugs M8x8 BGM Pro with magnet for Vespa 50/125/150/200 Special-Primavera-PX-GT-VBB-GL-Rally
        Available
        Compatibility

        Tutti i modelli / All Models

        technical specifications

        Measurements: M 8 wrench 11 mm
        Includes fiber washer

        Approfondisci
        Shipping time
        24/48 hours
        13,99 €
        11,47 € VAT excluded
        1 point RDV = 2 cents 13 points RDV = 0,26 € cashback
        -11% RDV choice Cable sleeve -5 meters- in gray color Ø=8mm
        low availability
        low availability
        07-FC-009-IR
        07-FC-009-IR

        Cable sleeve -5 meters- in gray color Ø=8mm

        Compatibility

        All models

        Approfondisci
        7,90 € 8,90 €
        6,48 € VAT excluded
        1 point RDV = 2 cents 7 points RDV = 0,14 € cashback
        Rear brake shoe set "PRO RACE" for Vespa 125 V1>15T-V30>33T-VM1>2T-VNB/150 VL1>3T-VB1T-VBA-VBB
        low availability
        Compatibility

        Vespa 125 V1>15T
        Vespa 125 V30>33T
        Vespa 125 VM1>2T
        Vespa 125 VN1>2T
        Vespa 125 VNA1>2T
        Vespa 125 VNB1>3T
        Vespa 150 VL1>3T
        Vespa 150 VB1T
        Vespa 150 VBA1T
        Vespa 150 VBB1T

        Approfondisci
        27,90 €
        22,87 € VAT excluded
        1 point RDV = 2 cents 27 points RDV = 0,54 € cashback
        -7% Complete shock absorber BGM Pro F16 in dark gray color for Vespa 125 V30-33/​VM/​VN/​ACMA/​Hoffmann C/​VNA-TS/​150 VL/​VB1/​VD/​VGLA/​B/​VGL1/​GS/​VBA-Super/​Rally/
        Available
        Compatibility

        Vespa 125 V30T > V33T (adaptable)
        All models from '53 to '79
        Except 125 Primavera ET3,PK;PX,PE

        technical specifications

        Aluminum-colored body, it is possible to adjust the compression damping thanks to a 16-position ring.

        Approfondisci
        Shipping time
        24/48 hours
        129,99 € 139,90 €
        106,55 € VAT excluded
        1 point RDV = 2 cents 129 points RDV = 2,58 € cashback
        -7% Complete shock absorber BGM Pro F16 in Black for Vespa 125 V30-33/​VM/​VN/​ACMA/​Hoffmann C/​VNA-TS/​150 VL/​VB1/​VD/​VGLA/​B/​VGL1/​GS/​VBA-Super/​Rally/
        Available
        Compatibility

        Vespa 125 V30T > V33T (adaptable)
        All models from '53 to '79
        Excluding 125 Primavera ET3,PK;PX,PE

        technical specifications

        Aluminum-colored body, it is possible to adjust the compression damping thanks to a 16-position ring.

        Approfondisci
        Shipping time
        24/48 hours
        129,99 € 139,90 €
        106,55 € VAT excluded
        1 point RDV = 2 cents 129 points RDV = 2,58 € cashback
        -6% Complete shock absorber BGM Pro SC Competition for Vespa 125 VM1 BGM7761B
        Available
        Compatibility

        Vespa 125 V30T > V33T (adaptable)
        All models from '53 to '79
        Excluding 125 Primavera ET3, PK, PX, PE

        technical specifications

        The BGM PRO SC Competition front shock absorber is an evolution of the successful BGM PRO F16 Sport series. Externally, the Competition series is distinguished by the external reservoir. It has a modified base adjustment and is therefore very well suited for use with stiff sports springs. The compression/rebound adjustment prevents bottoming out or rapid extension on rough roads. Thanks to these features, the shock absorber is an excellent replacement
        even for more powerful vehicles. The wide adjustability clearly allows the shock absorber to be used with standard springs as well, ensuring maximum comfort during driving.

        Approfondisci
        Shipping time
        24/48 hours
        169,00 € 179,00 €
        138,52 € VAT excluded
        1 point RDV = 2 cents 169 points RDV = 3,38 € cashback
        -6% Motorcycle Mover Trolley -BGM PRO- Vespa Smallframe/Largeframe/Wideframe V50-V90-ET3-PK-PX-T5-Rally-Sprint-GT-GTR-SS180-GL-Super-GS160-VNA-VNB-VBA-VBB-V1-V15-V30-V33
        Available
        Compatibility

        Vespa Smallframe, largeframe, wideframe

        technical specifications

        Useful motorcycle dolly for all vintage Vespas
        Perfect for easily moving your motorcycle in the garage. Simply place the dolly under the scooter and lift it onto the central stand. The four wheels and reinforced structure of the dolly allow you to support the motorcycle with stability and move it in all directions without much effort.

        Adjustable in width thanks to the manual pin and therefore usable for many vehicles
        Stand width: min 34cm - max. 62cm
        Solid galvanized steel structure
        Maximum load: 200 kg, each wheel can support up to 50 kg.

        Approfondisci
        Shipping time
        24/48 hours
        74,90 € 79,90 €
        61,39 € VAT excluded
        1 point RDV = 2 cents 74 points RDV = 1,48 € cashback
        -10% Rear wheel drum -BGM PRO- for Vespa 125/150 V30
        Available
        Available
        07-DV-037-IR
        07-DV-037-IR

        Rear wheel drum -BGM PRO- for Vespa 125/150 V30

        Compatibility

        Vespa 98 V98T Front and rear

        Vespa 125 V1>11T>24000 Front and rear

        Vespa 125 V12T>15T

        Vespa 125 V30>33T

        Vespa 125 VM1>2T

        Vespa 125 U VU1T

        Vespa 125 VN1>2T

        Vespa 125 VNA1>2T

        Vespa 125 VNB1>6T

        Vespa 150 VL1>2T

        Approfondisci
        Shipping time
        24/48 hours
        98,10 € 109,00 €
        80,41 € VAT excluded
        1 point RDV = 2 cents 98 points RDV = 1,96 € cashback
        Cylinder Gasket Kit BGM Pro 150cc for Vespa 125 VM1>2T/VN1>2T-150 VL1>3T/VB1T
        Available
        Compatibility

        Vespa 125 VM1>2T/VN1>2T-150 VL1>3T/VB1T

        Approfondisci
        14,99 €
        12,29 € VAT excluded
        1 point RDV = 2 cents 14 points RDV = 0,28 € cashback
        Cylinder Base BGM Original for Vespa 125 VM1>2T/VN1>2T-150 VL1>3T/VB1T
        Available
         
        Shipping time
        24/48 hours
        10,54 €
        8,64 € VAT excluded
        1 point RDV = 2 cents 10 points RDV = 0,20 € cashback
        -6% BGM PRO SC/R1 SPORT Shock Absorber in Black/Silver, 385 mm complete for Vespa 125 VN1T 6001>/VN2T-VL1>3T-GS150 VS1>5T
        Available
        Compatibility

        Vespa 125 VM1>2T
        Vespa 125 VN1T
        Vespa 125 VN2T
        Vespa 150 VL1>3T
        Vespa 150 VB1T
        Vespa 150 GS VS1>4T
        Vespa 150 GS VS5T Export models
        Adaptable Vespa 150 GS VS5T

        technical specifications

        The BGM Pro SC SPORT shock absorber is designed for Vespa with a wide frame, such as the VM, VN, VB, VL, and GS150 models. It is a sporty, comfortable, and adjustable product, with TÜV certification. The spring preload is continuously adjustable, and the shock absorber is pre-configured at the factory.

        Suitable as a direct replacement for models from 1955 to 1954 inclusive, the spring and shock absorber are separate. For later models, an upper shock absorber mount is available, sold separately, allowing use on vehicles prior to 1955. Two screw adapters (M8 and M9) specific to each model are included. The shock absorber is adjustable in length between 385 and 420 mm.

        Made of high-strength aluminum and CNC machined, it has hard anodized surfaces for optimal protection and long durability. Its sporty and harmonious design ensures excellent road performance. The suspension reduces dive during braking and roll during acceleration, improving handling and stability.

        The shock absorber has a KBA and ABE test mark, with a very competitive price/quality ratio. The technology used comes from the BGM Pro SC COMPETITION shock absorber, with an anodized body and

        Approfondisci
        259,00 € 276,89 €
        212,30 € VAT excluded
        1 point RDV = 2 cents 259 points RDV = 5,18 € cashback
        -14% Front shock absorber -BGM PRO TOURING for Vespa 125 V30-33/​VM/​VN/​ACMA/​Hoffmann C/​VNA-TS/​150 VL/​VB1/​VD/​VGLA/​B/​VGL1/​GS/​VBA-Super/​Rally/
        low availability
        Compatibility

        Vespa 125 V30T > V33T (adaptable)
        All models from '53 to '79
        Excluding 125 Primavera ET3,PK;PX,PE

        technical specifications


        Approfondisci
        169,00 € 196,98 €
        138,53 € VAT excluded
        1 point RDV = 2 cents 169 points RDV = 3,38 € cashback
        Rear shock absorber adapter -BGM PRO R1, R12, BGM7782, BGM7742 - Vespa PX, V50, PV, ET3 -
        Available
        Compatibility

        Vespa PX, V50, PV, ET3

        technical specifications

        The adapter is securely screwed to the shock absorber and secured against loosening with the screw lock. The lower M16x1 thread fits all rear shock absorbers bgm Pro of the R1 and R12 series. The upper M9 thread is screwed directly to the shock absorber with a suitable spacer or to the silent block.

        Approfondisci
        Shipping time
        24/48 hours
        10,90 €
        8,93 € VAT excluded
        1 point RDV = 2 cents 10 points RDV = 0,20 € cashback
        -11% RDV choice Cable sleeve -5 meters- in grey color Ø=10mm
        Available
        Available
        07-FC-010-IR
        07-FC-010-IR

        Cable sleeve -5 meters- in grey color Ø=10mm

        Compatibility

        All models

        Approfondisci
        Shipping time
        24/48 hours
        7,90 € 8,90 €
        6,48 € VAT excluded
        1 point RDV = 2 cents 7 points RDV = 0,14 € cashback
        BGM PRO Faster Flow V2.0 fuel tap with electric reserve contact
        Available
        Compatibility

        Vespa 50/90/125/150/160/180/200

        Approfondisci
        Shipping time
        24/48 hours
        29,99 €
        24,58 € VAT excluded
        1 point RDV = 2 cents 29 points RDV = 0,58 € cashback
        1000ml BGM Mix Tank for Engine Testing with Tap
        Available
        Available
        13-IC-015-RR
        13-IC-015-RR

        1000ml BGM Mix Tank for Engine Testing with Tap

        Compatibility

        All models

        Approfondisci
        Shipping time
        24/48 hours
        26,99 €
        22,12 € VAT excluded
        1 point RDV = 2 cents 26 points RDV = 0,52 € cashback
        BGM Pro clutch bush for Vespa PX, T5 125cc, Cosa, Rally, TS, Sprint, GT, GTR, SS180, GS160 / GS4, GL, Super, VNA, VNB, VBA, VBB
        Available
        Compatibility

        Vespa 125 (Excluding primavera ET3)
        Vespa 150
        Vespa 160
        Vespa 180
        Vespa 200
        All models / All Models

        technical specifications

        High-quality material ensures a very smooth sliding operation in all conditions.

        Approfondisci
        Shipping time
        24/48 hours
        14,90 €
        12,21 € VAT excluded
        1 point RDV = 2 cents 14 points RDV = 0,28 € cashback
        -10% External coil - BGM PRO with fixed timing for IDM ignition - Ducati blue type Vespa PX, PK, Lambretta - used for Polini IDM, Vespatronic, VesPower, Varitronic, Flytech, Parmakit
        low availability
        Compatibility

        for IDM ignition - Ducati type blue Vespa PX, PK, Lambretta - used for Polini IDM, Vespatronic, VesPower, Varitronic, Flytech, Parmakit

        Approfondisci
        98,10 € 109,00 €
        80,41 € VAT excluded
        1 point RDV = 2 cents 98 points RDV = 1,96 € cashback
        Thin yarn work gloves 100% nylon with polyurethane coating
        Available
        technical specifications

        The breathable back ensures particular comfort. The thin 100% nylon yarn offers a perfect fit. The polyurethane coating ensures an optimal grip and high tactile sensitivity. At the same time, it protects hands from oil and dirt. Ideal for tasks that require high protection and, at the same time, a good sense of touch.

        Approfondisci
        Shipping time
        24/48 hours
        1,99 €
        1,63 € VAT excluded
        1 point RDV = 2 cents 1 points RDV = 0,02 € cashback
        BGM PRO 4 Faston Voltage Regulator 12V AC/DC - Universal
        Available
        Compatibility

        Universal

        Approfondisci
        Shipping time
        24/48 hours
        32,90 €
        26,97 € VAT excluded
        1 point RDV = 2 cents 32 points RDV = 0,64 € cashback
        Carburetor jet reamer tool with 12 reamers (from 0.6 to 1.9 mm)
        low availability
        Compatibility

        All models

        Approfondisci
        40,70 €
        33,36 € VAT excluded
        1 point RDV = 2 cents 40 points RDV = 0,80 € cashback

        Hai visualizzato 36 di 36 prodotti