Spare parts and accessories for Vespa 125 VM2T
Choose the best spare parts for Vespa 125 VM2T (1954) in our specialized shop. This second series of the VM model, the iconic 'Faro Basso', requires attention to detail for an impeccable restoration. Our catalog offers selected components for the VM2T frame: from the specific electrical system and light switch, to the mechanical parts of the 'square' engine, up to the bodywork and upholstery details. We guarantee the highest historical fidelity of the products to preserve the authenticity and charm of your vintage Vespa 125.
BGM PRO crankshaft bearing and oil seal kit FKM/Viton® (E10/ethanol resistant) for Vespa 125/150 VM/VN/VL/VB1T/VNA/GS
Vespa 125/150 VM/VN/VL/VB1T/VNA/GS
WIDE FRAME ENGINE ISSUE: The BGM Pro and Corteco oil seals, of much higher quality, are available (for safety reasons) only with a 0.8 mm sheet metal coating. If installed in a wide frame engine, the crankshaft bearings deform, causing damage to the bearings.
WIDE FRAME ENGINE SOLUTIONS: The circumferential bead of the oil seal is flattened, reducing the height of the oil seal plate by approximately 0.3 mm. The bearings then move freely. b) The BGM Pro bearing set with special FAG 9-ball bearings. In this case, the bearing shoulders have been precisely machined to ensure stress-free mounting of the crankshaft bearing. The set includes high-quality, durable BGM Pro FKM/Viton® oil seals.
Trolley extension for motorcycle mover (rear wheel) -BGM PRO- Vespa Smallframe/Largeframe/Wideframe V50-V90-ET3-PK-PX-T5-Rally-Sprint-GT-GTR-SS180-GL-Super-GS160-VNA-VNB-VBA-VBB-V1-V15-V30-V33
Vespa Smallframe, largeframe, wideframe
Brilliant extension for maneuvering assistance by BGM PRO for all classic
Vespa and Lambretta scooters. With the addition for the rear wheel, the
vehicle can be turned on the spot. This way, the scooter can be stored
well and safely even in the smallest corner and can be easily removed
again. All this without any effort.
Intake manifold BGM PRO Ø24mm compatible with Dellorto PHBL24/25, Polini CP23/24- Vespa Wideframe 125cc Vespa V1-V15, V30-V33, VN, VM, Vespa ACMA 125 (1951-1955)
Vespa V1-V15, V30-V33, VN, VM, Vespa ACMA 125 (1951-1955)
BGM Pro Touring Exhaust for Vespa 125VM1>2T/VN1>2T-150 VL1>3T-VB1T
Vespa 125VM1>2T/VN1>2T-150 VL1>3T-VB1T
The new BGM Pro Touring muffler is a real wolf in sheep's clothing: a powerful sports exhaust that perfectly blends into the unobtrusive design of a standard exhaust. Thanks to the innovative design of the BGM PRO Touring Box, with the flat diffuser opening angle and moderate resonance length, it optimally adapts to different cylinder concepts. The result? A wonderful touring machine that moves with great thrust right from low revs.
Perfect on tuning cylinders like BGM150, Pinasco160, or CC Corsa 160/175
Vespa 125 VM1T>VM2T
Vespa 125 VN1T>2T
Vespa 150 VL1T>VL3T
Vespa 150 VB1T
BGM PRO crankshaft for Vespa Wideframe made with high-alloy forged blanks. Ideal in combination with the BGM PRO 150cc Wideframe tuning cylinder.
The crankshaft has been designed as a heavy tuning crankshaft, but it is also clearly recommended as a practically indestructible shaft for original engines.
Stroke: 57 mm
Connecting rod length: 110 mm
Piston pin: Ø15 mm
Connecting rod bearing: needle bearing (upper and lower)
One of the main advantages of the BGM PRO crankshaft compared to the original one is the use of a high-quality connecting rod with needle bearing (instead of a simple bearing bushing) and a slotted lower connecting rod eye. This greatly reduces the oil requirement, so that the engines can run smoothly even with a 1:50 mixture with current high-quality oils.
The balance factor has been improved, among other things, thanks to a hollow crank pin.
The crankshaft is suitable for all 125 and 150 cc engines. The 125 cc engines only have a stroke of 54 mm, so a cylinder designed for a stroke of 57 mm (BGM155
Cylinder -BGM PRO 150 cc, wide frame, Faro Basso, Ø=57mm, stroke=57mm- Vespa 1953-1959, VM, VN, ACMA (from engine V55), VB1T, VGL1T, VL1T
Vespa 125 VM1T>VM2T
Vespa 125 VN1T>VN2T
Vespa 150 VL1T>VL3T
BGM PRO cylinder with 150cc and 57 mm stroke suitable for all 2-channel engines. The grey cast iron cylinder has three transfer ports and is suitable for all wide frame engines with a 57 mm stroke. The cylinder with a 57 mm crankshaft also fits 125 cc engines with a 54 mm stroke without any issues. The third port of the cylinder is sealed with an aluminum spacer for the foot gasket, supplied, and the cylinder is evacuated via a corresponding cut in the piston. This means that no modifications to the engine housing are necessary.
Displacement: 150 cc
Stroke: 57 mm
Piston: Ø = 57 mm
Piston rings: 2 x 1.5 mm
Cylinder material: Cast iron
Cylinder head: CNC machined from solid aluminum with additional cooling fins at the bottom
Ports: 3
Spark plug: short thread (e.g., NGK B8HS, Bosch W3AC)
Ignition timing: 18-19°
The cylinder gives very old Vespas significantly more pulling power and top speed. Rapid acceleration, even by today's standards, is the specialty of the BGM PRO 150
BGM rubber sleeve (d. 35-40) for Vespa 50/90/125/150/200 Special-N-L-R-PK-PX-Sprint-GL-TS
Complete BGM Pro SC Competition Shock Absorber in Silver for Vespa 125 VM1
Vespa 125 V30T > V33T (adaptable)
All models from '53 to '79
Excluding 125 Primavera ET3,PK;PX,PE
The BGM PRO SC Competition front shock absorber is an evolution of the successful BGM PRO F16 Sport series. Externally, the Competition series is distinguished by the external reservoir. It has a modified base adjustment and is therefore very suitable when used with stiff sport springs. The compression/rebound adjustment prevents diving or rapid extension on rough roads. Thanks to these features, the shock absorber is an excellent replacement
even for more powerful vehicles. The wide adjustability clearly allows the shock absorber to be used with standard springs as well, ensuring maximum comfort during driving.
BGM Classic Tire 3.50/8 46P 150 km/h for Vespa 98/125 VM/VN/VL/VB1/VNB/VNA/VBB/Super
Vespa 98
Vespa 125 from '48 to '65
Vespa 150 from '54 to '66
3.50/8
Black
Vespa Wideframe 98/125/150cc V98, V1T-15T, V30T-33T, Hoffmann HA/HB, VM,VN, VL, VB, VGL, VD, GS150, Piaggio APE A1T-15T, AB1T-4T, AC
Special tool BGM pro for the rear wheel bearing nut of all Vespa Wideframe models.
Thanks to its intelligent design, this tool can be used for both hole sizes (Ø37+43mm). It offers the possibility to preload the tool on the nut to be loosened. Thanks to the identical thread pitch of the tool and the nut, the preload is fully maintained during loosening, making slipping impossible.
Vespa 50/90/125/150/160/180/200
Nut and washer clutch assembly BGM PRO for Vespa PX, Rally180 (VSD1T), Rally200 (VSE1T), Sprint, T5 125cc, Cosa1
Vespa 125 (all except Primavera ET3)
Vespa 150
Vespa 160
Vespa 180
Vespa 200
M12 x 1.50 collar Ø:18.6mm h:9mm
key opening:15
All models
BGM PRO SC/R1 SPORT shock absorber in Black, 385 mm complete for Vespa 125 VN1T 6001>/VN2T-VL1>3T-GS150 VS1>5T
Vespa 125 VM1>2T
Vespa 125 VN1T
Vespa 125 VN2T
Vespa 150 VL1>3T
Vespa 150 VB1T
Vespa 150 GS VS1>4T
Vespa 150 GS VS5T Export models
Adaptable Vespa 150 GS VS5T
The BGM Pro SC SPORT shock absorber is designed for Vespa with a wide frame, such as the VM, VN, VB, VL, and GS150 models. It is a sporty, comfortable, and adjustable product with TÜV certification. The spring preload is continuously adjustable and the shock absorber is pre-configured at the factory.
Suitable as a direct replacement for models from 1955 to 1954 inclusive, the spring and shock absorber are separate. For later models, an upper shock absorber mount is available, sold separately, which allows use also on vehicles prior to 1955. Two specific screw adapters (M8 and M9) for each model are included. The shock absorber is adjustable in length between 385 and 420 mm.
Made of high-strength aluminum and CNC machined, it has hard anodized surfaces for optimal protection and long-lasting durability. Its sporty and harmonious design ensures excellent on-road performance. The suspension reduces dive during braking and roll during acceleration, improving handling and stability.
The shock absorber has KBA and ABE test markings, with a very competitive quality/price ratio. The technology used comes from the BGM Pro SC COMPETITION shock absorber, with an anodized body
Vespa 50-125/PV/ET3/PK/S/SS/XL/XL2/125 VNA -TS/150 VBA-Super/Rally/PX/PE/T5/Cosa
BGM PRO Radial Brake Caliper with 4 Pistons - Made in Italy (TÜV Approved)
The renowned BGM Pro radial brake caliper with 4 pistons has been completely redesigned and improved. Produced entirely in Italy, this new version boasts an optimized bleeding system that makes maintenance operations faster and easier than before. Combining elegant design with maximum functionality, BGM Pro offers a caliper that guarantees braking power, safety, and durability over time.
The BGM Pro Sport caliper offers a braking surface superior by about 28% compared to standard two-piston calipers (typical of Vespa PX or LML Star). The technical advantages translate into:
✅ Greater braking power: More decisive deceleration and reduced stopping distances.
✅ Improved feel: Optimized hydraulic transmission ratio for precise modulation.
✅ Even wear: Pressure distributed over 4 points ensures uniform contact between pads and disc.
✅ Quick maintenance: Pad replacement facilitated by the two-ring fastening system.
Technical Compatibility
Mounting: Radial for supports with hole spacing of 82 mm.
Adaptability: Also compatible with supports from other brands (e
Pair of oil fill/drain plugs M8x8 BGM Pro with magnet for Vespa 50/125/150/200 Special-Primavera-PX-GT-VBB-GL-Rally
Tutti i modelli / All Models
Measurements: M 8 wrench 11 mm
Includes fiber washer
All models
Rear brake shoe set "PRO RACE" for Vespa 125 V1>15T-V30>33T-VM1>2T-VNB/150 VL1>3T-VB1T-VBA-VBB
Vespa 125 V1>15T
Vespa 125 V30>33T
Vespa 125 VM1>2T
Vespa 125 VN1>2T
Vespa 125 VNA1>2T
Vespa 125 VNB1>3T
Vespa 150 VL1>3T
Vespa 150 VB1T
Vespa 150 VBA1T
Vespa 150 VBB1T
Complete shock absorber BGM Pro F16 in dark gray color for Vespa 125 V30-33/VM/VN/ACMA/Hoffmann C/VNA-TS/150 VL/VB1/VD/VGLA/B/VGL1/GS/VBA-Super/Rally/
Vespa 125 V30T > V33T (adaptable)
All models from '53 to '79
Except 125 Primavera ET3,PK;PX,PE
Aluminum-colored body, it is possible to adjust the compression damping thanks to a 16-position ring.
Complete shock absorber BGM Pro F16 in Black for Vespa 125 V30-33/VM/VN/ACMA/Hoffmann C/VNA-TS/150 VL/VB1/VD/VGLA/B/VGL1/GS/VBA-Super/Rally/
Vespa 125 V30T > V33T (adaptable)
All models from '53 to '79
Excluding 125 Primavera ET3,PK;PX,PE
Aluminum-colored body, it is possible to adjust the compression damping thanks to a 16-position ring.
Complete shock absorber BGM Pro SC Competition for Vespa 125 VM1
Vespa 125 V30T > V33T (adaptable)
All models from '53 to '79
Excluding 125 Primavera ET3, PK, PX, PE
The BGM PRO SC Competition front shock absorber is an evolution of the successful BGM PRO F16 Sport series. Externally, the Competition series is distinguished by the external reservoir. It has a modified base adjustment and is therefore very well suited for use with stiff sports springs. The compression/rebound adjustment prevents bottoming out or rapid extension on rough roads. Thanks to these features, the shock absorber is an excellent replacement
even for more powerful vehicles. The wide adjustability clearly allows the shock absorber to be used with standard springs as well, ensuring maximum comfort during driving.
Front wheel drum BGM Pro in cast iron for Vespa 125 V1-15/V30-33/VU/VM/VN/VNA/Hoffmann/VNB/ACMA/150 VL/VB/VBA/VBB
Vespa 98 V98T Front and rear
Vespa 125 V1>11T>24000 Front and rear
Vespa 125 V12T>15T
Vespa 125 V30>33T
Vespa 125 VM1>2T
Vespa 125 U VU1T
Vespa 125 VN1>2T
Vespa 125 VNA1>2T
Vespa 125 VNB1>6T
Vespa 150 VL1>2T
Motorcycle Mover Trolley -BGM PRO- Vespa Smallframe/Largeframe/Wideframe V50-V90-ET3-PK-PX-T5-Rally-Sprint-GT-GTR-SS180-GL-Super-GS160-VNA-VNB-VBA-VBB-V1-V15-V30-V33
Vespa Smallframe, largeframe, wideframe
Useful motorcycle dolly for all vintage Vespas
Perfect for easily moving your motorcycle in the garage. Simply place the dolly under the scooter and lift it onto the central stand. The four wheels and reinforced structure of the dolly allow you to support the motorcycle with stability and move it in all directions without much effort.
Adjustable in width thanks to the manual pin and therefore usable for many vehicles
Stand width: min 34cm - max. 62cm
Solid galvanized steel structure
Maximum load: 200 kg, each wheel can support up to 50 kg.
Vespa 98 V98T Front and rear
Vespa 125 V1>11T>24000 Front and rear
Vespa 125 V12T>15T
Vespa 125 V30>33T
Vespa 125 VM1>2T
Vespa 125 U VU1T
Vespa 125 VN1>2T
Vespa 125 VNA1>2T
Vespa 125 VNB1>6T
Vespa 150 VL1>2T
Cylinder Gasket Kit BGM Pro 150cc for Vespa 125 VM1>2T/VN1>2T-150 VL1>3T/VB1T
Vespa 125 VM1>2T/VN1>2T-150 VL1>3T/VB1T
Cylinder Base BGM Original for Vespa 125 VM1>2T/VN1>2T-150 VL1>3T/VB1T
BGM PRO SC/R1 SPORT Shock Absorber in Black/Silver, 385 mm complete for Vespa 125 VN1T 6001>/VN2T-VL1>3T-GS150 VS1>5T
Vespa 125 VM1>2T
Vespa 125 VN1T
Vespa 125 VN2T
Vespa 150 VL1>3T
Vespa 150 VB1T
Vespa 150 GS VS1>4T
Vespa 150 GS VS5T Export models
Adaptable Vespa 150 GS VS5T
The BGM Pro SC SPORT shock absorber is designed for Vespa with a wide frame, such as the VM, VN, VB, VL, and GS150 models. It is a sporty, comfortable, and adjustable product, with TÜV certification. The spring preload is continuously adjustable, and the shock absorber is pre-configured at the factory.
Suitable as a direct replacement for models from 1955 to 1954 inclusive, the spring and shock absorber are separate. For later models, an upper shock absorber mount is available, sold separately, allowing use on vehicles prior to 1955. Two screw adapters (M8 and M9) specific to each model are included. The shock absorber is adjustable in length between 385 and 420 mm.
Made of high-strength aluminum and CNC machined, it has hard anodized surfaces for optimal protection and long durability. Its sporty and harmonious design ensures excellent road performance. The suspension reduces dive during braking and roll during acceleration, improving handling and stability.
The shock absorber has a KBA and ABE test mark, with a very competitive price/quality ratio. The technology used comes from the BGM Pro SC COMPETITION shock absorber, with an anodized body and
Front shock absorber -BGM PRO TOURING for Vespa 125 V30-33/VM/VN/ACMA/Hoffmann C/VNA-TS/150 VL/VB1/VD/VGLA/B/VGL1/GS/VBA-Super/Rally/
Vespa 125 V30T > V33T (adaptable)
All models from '53 to '79
Excluding 125 Primavera ET3,PK;PX,PE
Rear shock absorber adapter -BGM PRO R1, R12, BGM7782, BGM7742 - Vespa PX, V50, PV, ET3 -
Vespa PX, V50, PV, ET3
The adapter is securely screwed to the shock absorber and secured against loosening with the screw lock. The lower M16x1 thread fits all rear shock absorbers bgm Pro of the R1 and R12 series. The upper M9 thread is screwed directly to the shock absorber with a suitable spacer or to the silent block.
All models
Vespa 50/90/125/150/160/180/200
All models
BGM Pro clutch bush for Vespa PX, T5 125cc, Cosa, Rally, TS, Sprint, GT, GTR, SS180, GS160 / GS4, GL, Super, VNA, VNB, VBA, VBB
Vespa 125 (Excluding primavera ET3)
Vespa 150
Vespa 160
Vespa 180
Vespa 200
All models / All Models
High-quality material ensures a very smooth sliding operation in all conditions.
External coil - BGM PRO with fixed timing for IDM ignition - Ducati blue type Vespa PX, PK, Lambretta - used for Polini IDM, Vespatronic, VesPower, Varitronic, Flytech, Parmakit
for IDM ignition - Ducati type blue Vespa PX, PK, Lambretta - used for Polini IDM, Vespatronic, VesPower, Varitronic, Flytech, Parmakit
The breathable back ensures particular comfort. The thin 100% nylon yarn offers a perfect fit. The polyurethane coating ensures an optimal grip and high tactile sensitivity. At the same time, it protects hands from oil and dirt. Ideal for tasks that require high protection and, at the same time, a good sense of touch.
Universal
Carburetor jet reamer tool with 12 reamers (from 0.6 to 1.9 mm)
All models
Hai visualizzato 38 di 38 prodotti