Dexter pan exhaust (28 mm outlet) for Vespa 50 N/L/R-Special/ 90-125 Primavera ET3
Marmitta Padellino Dexter Racing 3.0 by W1R – Vespa Smallframe
Main Features
New version updated 3.0 developed in collaboration with W1R
Collector with 32 mm inner diameter
Reduced noise compared to a classic Proma
Original “padellino” style aesthetics
Excellent torque at low and mid-range
Allows optimal use of the 4th gear
Plug & play installation without modifications
Compatibility
Vespa 50 Special
Vespa 50 R
Vespa 50 L
Vespa 50 N
Configurations stroke 43 and stroke 51
The new version 3.0 is also compatible with:
Vespa 125 Primavera with side compartment
For correct installation, it is possible to use:
3.00-10
90/90-10
Vespa 50 Special V5B3T
Adaptable
Vespa 50 V5A1T N/L/R
Vespa 50 Special V5A2T>3T
Related articles
Complete thermal group RMS (102cc) for Vespa 50 N/L/R-Special-PK
Vespa 50 V5A1T N,L,R
Vespa 50 Special V5A2>3T
Vespa 50 PK
Ape 50
Vespa 50 Special V5B1>4T
Brand: RMS
Bore: 55
Stroke: 43
Displacement: 102 cc
Vespa 50 V5A1T N,L,R
Vespa 50 Special V5A2>3T
Vespa 50 Special V5B1>4T
Vespa 50 PK
Vespa 50 PK S
3 transfers
Diameter: 38.4 mm
Complete thermal group Olympia (75cc) for Vespa 50 N/L/R-Special-PK
Vespa 50 V5A1T N,L,R
Vespa 50 Special V5A2>3T
Vespa 50 Special V5B1>4T
Vespa 50 PK S/XL/N/HP
Bore: 47mm
Stroke: 43mm
Displacement: 75cc
BCR thermal group (50cc) for Vespa 50 V5A1T N/L/R/50 Special V5A2>3T/50 Special V5B1>4T/50 PK/
Vespa 50 V5A1T N,L,R, Vespa 50 Special V5A2>3T, Vespa 50 Special V5B1>4T, Vespa 50 PK, Ape 50
Bore--> 38.4 mm
Ape 50
Bore--> 38.4 mm
Thermal group VMC RV-A 100 (100cc) for Vespa 50 V5A1T N/L/R/50 Special V5A2
Vespa 50 V5A1T N,L,R, Vespa 50 Special V5A2>3T, Vespa 50 Special V5B1>4T, Vespa 50 PK, Ape 50
VMC has developed a superior class cylinder with this lamellar to the RV-A 100 cylinder.
The technical solutions on this cylinder allow performances that were previously reserved for long-stroke cylinders.
The cylinder is made of aluminum with a Nikasil coated barrel and lamellar intake.
The head is CNC machined, with a viton gasket and secured with eight M6 bolts.
It has a bore of 54 mm and a stroke of 43 mm, 8 transfers
Exhaust port with bridge with an outlet diameter of 28 mm and stud spacing of 52 mm
Phases 113° intake and 171° for the exhaust
The manifold has an internal diameter of 25 mm and is equipped with a four-petal reed pack.
Included in the kit are the original valve closure cap screw kit and gasket kit in paper of different thicknesses.
Recommended carburetor sizes: 19 - 24 mm
Pinasco "Zuerino" SVR thermal group (102cc) for Vespa 50 V5A1T N/L/R/50 Special V5A2>3T/50 Special V5B1>4T/50 PK/
Vespa 50 V5A1T N,L,R, Vespa 50 Special V5A2>3T, Vespa 50 Special V5B1>4T, Vespa 50 PK, Ape 50
The Pinasco 102cc SRV "Zuerino" Ø 55mm thermal group is a new product dedicated to the world of Vespa 50 and Ape 50 with a 43mm stroke. Based on the famous Zuera 135cc, the 102cc SRV "Zuerino" features a transfer system very similar to that of its bigger brother, using the same RD350-type reed valve pack and the same flow guide, it mounts a single-ring piston with bi-conical pin, the new central spark plug head with 8 studs and centering bushings that definitively eliminates the problem of leaks and consequent performance drops with a compression ratio of 12.3:1.
The Pinasco 102cc SRV is a generous engine designed to make the most of power at low revs, its exhaust port has been designed to work correctly with original exhausts and commonly called "banana" stamped exhausts but can also be used in more advanced setups.
Pinasco "Zuerino" SVR Thermal Group (102cc) for Vespa 50 PK (manifold Ø19-19)
50 HP
The Pinasco 102cc SRV "Zuerino" Ø 55mm thermal group is a new product dedicated to the world of Vespa 50 with a 43mm stroke.
Based on the famous Zuera 135cc, the 102cc SRV "Zuerino" features a transfer system very similar to its bigger brother, uses the same RD350 type reed valve pack and the same flow guide, mounts a single-ring piston with bi-conical pin, the new central spark plug head with 8 studs and centering bushings that definitively eliminates the problem of leaks and consequent performance drops with a compression ratio of 12.3:1.
The Pinasco 102cc SRV is a copious engine designed to make the most of power at low revs, its exhaust port has been designed to work correctly with original exhausts and stamped mufflers
commonly called "bananas" but can also be used in
more advanced setups.
It does not require special modifications to the engine case, it can be used with
all crankshafts on the market including the original ones, its
installation allows the use of engine
Elastic band kit for complete thermal group DR/OLYMPIA (38.4 cm - 50 cc) Vespa 50 N/L/R-Special-PK
Vespa 50 V5A1T N,L,R
Vespa 50 Special V5A2>3T
Vespa 50 Special V5B1>4T
Vespa 50 PK
Vespa 50 PK S
Complete thermal group Olympia economical version (75cc) for Vespa 50 N/L/R-Special-PK-Ape 50
Vespa 50 V5A1T N,L,R
Vespa 50 Special V5A2>3T
Vespa 50 Special V5B1>4T
Vespa 50 PK S/XL/N/HP
Bore: 47mm
Stroke: 43mm
Displacement: 75cc