Classic Vespa
Keychain with 2-in-1 silicone cable for charging Micro-USB and Lightning cell phones.
Length: 9 cm
2 Amperes
With carabiner
Seiger flat elastic ring jaw holder for Vespa 80/125/150/200 PX-PE 2nd series pin ร 20 mm
Vespa 80/125/150/200 PX-PE 2nd series with ร 20 mm pin
Vespa 125 PX E VNX2T 1115>
Vespa 150 PX E VLX1T 346430>
Vespa 200 PX E VSX1T 112624>
4-disc clutch modification kit for Vespa 50/90/125 Special-N-L-R-Primavera
Vespa 50 N V5A1T
Vespa 50 L V5A1T
Vespa 50 R V5A1T
Vespa 50 Special
Vespa 50 SS V5SS1T
Vespa 90 V9A1T
Vespa 125 VMA1T > VMA2T
Vespa 125 Primavera ET3 VMB1T
Clutch disc series composed of: 3 thin steel discs of 0.8mm hardened (instead of 2 hardened 0.8mm and 1 non-hardened 1.5mm). The hardened discs are recognizable by their dark blue color. Created to meet the requests of some tuners who desire a slightly lower clutch pack.
Vespa 150 GS VS4T>VS5T
Complete Malossi cast iron thermal group (178 cc) for Vespa 125/150 Sprint V-GTR-TS-PX
Vespa 125 PX
Vespa 125 GT/GTR/TS
Vespa 125 Cosa
Vespa 150 PX
Vespa 150 Sprint Veloce
Vespa 150 Cosa
New cylinder with a bore increased to 63 mm with a displacement of 178cc and a completely revised internal fluid dynamics. The new transfer ports allow for a proper fit both with matched crankcases and completely original crankcases, and feature a special profiling designed to optimize flow and achieve significant performance increases, even without modifications.
Stroke: 57 mm
Transfer ports: 6
Long reach spark plug
Primary couple with extended ratio Pinasco (Z 24/63) for Vespa 200 PX-Rally-Cosa
Vespa 200 Rally VSE1T
Vespa P 200 E VSX1T
Vespa PX 200 E VSX1T
Vespa PX 200 E Rainbow VSX1T
Vespa PX 200 E Rainbow Elestart VSX1T
Vespa 200 PE VSX1T Millennium '98
Complete set of shock absorbers
Low windshield with white lower part for Vespa 50 PK-125 PK-125-150-200 PX-PE-Rally-TS-Sprint
Vespa PX
Vespa PE
Including attacks.
Vespa 50/90/125
Vespa 160 GS VSB1T
Vespa 180 SS VSC1T
Length 136 mm, bearing seat diameter 12 mm, bushing seat 9 mm.
Hard Tire 3.50/8 for Vespa 125 V30>30T/VM1>2T/VN1>2T/VNB/VBB/Super/150 VL1>3T/VB1T/VBA/VBB1>2T
Vespa 98
Vespa 125 from '48 to '65
Vespa 150 from '54 to '66
Load index: 46M
Vespa 80 PX V8X1T PX 125 VNX1T> VNX2T> 1115 PX 150 VL1T> 346430 P200E VSX1T> 112624
Vespa PX America
Simonini expansion exhaust with Aluminum silencer for Vespa 50 Special V5B3T
Vespa 50 Special V5B3T
Total length: 80mm
Vespa 125 Primavera VMA1>2T
Vespa 125 Primavera ET3 VMB1T
Note--> Complete with brackets and bolts
Specific for Zuera RR-VTR Thermal Groups
Toothed spring washer lever lock for Vespa 50/90/125 Special-N-L-R-Primavera
Vespa 50
Vespa 90
Vespa 125 Primavera
Vespa 125 Primavera ET3
Vespa 125 GTR VNL2T
Vespa 125 TS VNL3T
Vespa 125 GT VNL2T
Vespa 125 Super VNC1T
Vespa 150 Super VBC1T
Vespa 150 Sprint VLB1T 025400>
Vespa 150 Sprint Veloce VLB1T
Vespa 180 Rally VSD1T
Vespa 200 Rally VSE1T
Vespa PX (all except Arcobaleno)
Vespa PE (all except Arcobaleno)
Vespa 50/90/125/150/180/200 GT-GTR-TS-VNB-PX-VBB-VBA-Sprint-Super-GL-GS-Rally
The famous Vespa body has become the shape for this keychain with bright LED made of enameled metal. Packaged in a tin box.
Dimensions: cm 3.2x4.2x1.2
RACE carbon fan cover for Vespa 50 N/L/R-Special-125 Primavera ET3
Vespa 50 V5A1T N,L,R from 1966
Vespa 50 Special V5A2>3T
Vespa 50 Special V5B1>4T
Vespa 90 V9A1T
Vespa 125 Primavera VMA1T>2T
Vespa 125 Primavera ET3 VMB1T
Made of high-quality carbon fiber, it offers a glossy finish
(or matte at the customer's choice) provided by 3 layers of
UV-resistant clear coat. Where necessary, there are carbon/kevlar reinforcements to further ensure resistance to potential impacts. Compatible with original and standard products. Completely made in Italy.
Vespa 50 Special V5B1T > V5B4T
Made of high-quality carbon fiber, it offers a glossy finish (or matte at the customer's choice) provided by 3 layers of UV-resistant clear coat. Where necessary, there are carbon/kevlar reinforcements to make the resistance to possible impacts even safer. Compatible with original and standard products. Completely made in Italy.
Vespa 50 PK XL
Vespa 50 PK XL Rush
Vespa 125 PK XL
Made from high-quality carbon fiber, it offers a glossy finish
(or matte at the customer's choice) provided by 3 layers of
UV-resistant clear coat. Where necessary, there are carbon/kevlar reinforcements to further ensure resistance to possible impacts. Compatible with original and standard products. Completely made in Italy.
Engine cover protection DYF for Vespa 50/90/125 Special-Primavera-ET3
Vespa 50/90/125 Special-Spring-ET3
Made from high-quality carbon fiber, it offers a glossy finish
(or matte at the customer's choice) provided by 3 layers of
anti-UV clear coat. Where necessary, there are carbon/kevlar reinforcements to further ensure resistance to potential impacts. Compatible with original and standard products. Completely made in Italy.
Carbon SR number plate holder fairing for Vespa (universal application)
Universal
Made from high-quality carbon fiber, it offers a glossy finish
(or matte, at the customer's choice) provided by 3 layers of
UV-resistant clear coat. Where necessary, there are carbon/kevlar reinforcements to further ensure resistance to potential impacts. Compatible with original and standard products. Completely made in Italy.
Front RACING fender in carbon for Vespa 50/90/125 Special-N-L-R-Primavera-ET3 with ZIP SP-ET2-Quartz fork
Vespa 50/90/125 Special-N-L-R-Primavera-ET3
Made from high-quality carbon fiber, it offers a glossy finish
(or matte, at the customer's choice) provided by 3 layers of
UV-resistant clear coat. Where necessary, there are carbon/kevlar reinforcements to further ensure resistance to potential impacts. Compatible with original and standard products. Completely made in Italy.
Vespa 50/90 SS
Made from high-quality carbon fiber, it offers a glossy finish
(or matte at the customer's choice) provided by 3 layers of
UV-resistant clear coat. Where necessary, there are carbon/kevlar reinforcements to further ensure resistance to potential impacts. Compatible with original and standard products. Completely made in Italy.
Carbon engine compartment door for Vespa 50/90/125 Special-Primavera-ET3
Vespa 50 V5A1T 92877>
Vespa 50 Special V5A2>3T
Vespa 50 Special V5B1>4T
Vespa 90 V9A1T 22235>
Vespa 125 Primavera VMA1T>2T
Vespa 125 Primavera ET3 VMB1T
Made from high-quality carbon fiber, it offers a glossy finish
(or matte, at the customer's choice) provided by 3 layers of
UV-resistant clear coat. Where necessary, carbon/kevlar reinforcements are present to further ensure resistance to potential impacts. Compatible with original and standard products. Completely made in Italy.
Vespa 50 SS V5SS1T
Vespa 90 SS V9SS1T
Made of high-quality carbon fiber, it offers a glossy finish
(or matte at the customer's choice) provided by 3 layers of
UV-resistant clear coat. Where necessary, carbon/kevlar reinforcements are present to further ensure resistance to potential impacts. Compatible with original and standard products. Completely made in Italy.
Front nose with hexagonal carbon logo for Vespa 50/90/125 Special-N-L-R-Primavera-ET3
Vespa 50/90/125 Special-N-L-R-Primavera-ET3
Made from high-quality carbon fiber, it offers a glossy (or matte, depending on the customer's choice) finish provided by 3 layers of UV-protective clear coat. Where necessary, carbon/kevlar reinforcements are present to further ensure resistance to potential impacts. Compatible with original and standard products. Completely made in Italy.
Carbon rear fairing for Vespa 50/90/125 Special-N-L-R-Primavera-ET3
Vespa 50/90/125 Special-N-L-R-Primavera-ET3
Made of high-quality carbon fiber, it offers a glossy
finish (or matte at the customer's choice) provided by 3 layers of
UV-resistant clear coat. Where necessary, there are carbon/kevlar reinforcements to further ensure impact resistance. Compatible with original and standard products. Completely made in Italy.
Carbon shield and footboard for Vespa 50/90/125 Special-N-L-R-Primavera-ET3
Vespa 50/90/125 Special-N-L-R-Primavera-ET3
Made of high-quality carbon fiber, it offers a glossy finish (or matte at the customer's choice) provided by 3 layers of UV-resistant clear coat. Where necessary, there are carbon/kevlar reinforcements to further ensure resistance to potential impacts. Compatible with original and standard products. Completely made in Italy.
Carbon underbody spoiler for Vespa 50/90/125 Special-N-L-R-Primavera-ET3
Vespa 50/90/125 Special-N-L-R-Primavera-ET3
Made from high-quality carbon fiber, it offers a glossy finish (or matte at the customer's choice) provided by 3 layers of UV-resistant clear coat. Where necessary, carbon/kevlar reinforcements are present to further ensure resistance to potential impacts. Compatible with original and standard products. Completely made in Italy.
Vespa 50 N,L,R V5A1T
Vespa 50 Special V5A2>3T
Vespa 50 Special V5B1>4T
Vespa 90 V9A1T
Vespa 90 V9SS1T
Vespa 125 Primavera VMA1T>2T
Made of high-quality carbon fiber, it offers a glossy finish
(or matte at the customer's choice) provided by 3 layers of
UV-resistant clear coat. Where necessary, there are carbon/kevlar reinforcements to further ensure resistance to potential impacts. Compatible with original and standard products. Completely made in Italy.
Vespa 50/125 PK S-XK-RUSH
Manufactured in fiberglass with high-quality glass fiber. At critical
points (if necessary), they are reinforced with carbon fiber and
kevlar. The high quality of the molds in which they are processed ensures
that the final product has excellent paintability and
ease of assembly. Strength, lightness, and elasticity
are the main characteristics, derived from the use of advanced and professional materials.
Vespa 50/125 PK S-XK-RUSH
Produced in fiberglass with high-quality glass fiber. In critical points
(if necessary) they are reinforced with carbon fiber and
kevlar. The high quality of the molds in which they are processed ensures
that the final product has excellent paint finish and
great ease of assembly. Strength, lightness, and elasticity
are the main characteristics, derived from the use of cutting-edge and professional materials.
Fiberglass rear fairing for Vespa 50/90/125 Special-N-L-R-Primavera-ET3
Vespa 50/90/125 Special-N-L-R-Primavera-ET3
Product made of fiberglass with high-quality glass fiber. In critical
points (if necessary) they are reinforced with carbon fiber and
kevlar. The high quality of the molds in which they are processed ensures
that the final product has excellent paint finish and
great ease of assembly. Strength, lightness, and elasticity
are the main features, derived from the use of cutting-edge and professional materials.
Vespa 50 SS V5SS1T
Vespa 90 SS V9SS1T
Product made of fiberglass with high-quality glass fiber. In critical points
(if necessary) they are reinforced with carbon fiber and
kevlar. The high quality of the molds in which they are processed ensures that
the final product has an excellent paint finish and
great ease of assembly. Strength, lightness, and elasticity
are the main characteristics, derived from the use of advanced and professional materials.
Produced in fiberglass with high-quality glass fiber. In critical points
(if necessary) they are reinforced with carbon fiber and
kevlar. The high quality of the molds in which they are processed ensures
that the final product has excellent paint yield and
great ease of assembly. Strength, lightness, and elasticity
are the main characteristics, derived from the use of advanced
and professional materials.
Fiberglass underbody spoiler for Vespa 50/90/125 Special-N-L-R-Primavera-ET3
Vespa 50/90/125 Special-N-L-R-Primavera-ET3
Product made of fiberglass with high-quality glass fiber. In critical
points (if necessary) they are reinforced with carbon fiber and
kevlar. The high quality of the molds in which they are processed ensures
that the final product has excellent paint finish and
great ease of assembly. Resistance, lightness, and elasticity
are the main characteristics, derived from the use of state-of-the-art
and professional materials.
Fiberglass front brake air duct for Vespa 50/90/125 Special-N-L-R-Primavera-ET3 with ZIP SP-ET2-Quartz fork
Vespa 50/90/125 Special-N-L-R-Primavera-ET3
Product made of fiberglass with high-quality glass fiber. In critical
points (if necessary) reinforced with carbon fiber and
kevlar. The high quality of the molds in which they are processed ensures
that the final product has an excellent finish for painting and
great ease of assembly. Resistance, lightness, and elasticity
are the main characteristics, derived from the use of advanced and
professional materials.
Front fender RACING in fiberglass for Vespa 50/90/125 Special-N-L-R-Primavera-ET3 with ZIP SP-ET2-Quartz fork
Vespa 50/90/125 Special-N-L-R-Primavera-ET3
Product made of fiberglass with high-quality glass fiber. In critical
points (if necessary) they are reinforced with carbon fiber and
Kevlar. The high quality of the molds in which they are processed ensures
that the final product has excellent paintability and
great ease of assembly. Strength, lightness, and elasticity
are the main features, derived from the use of cutting-edge and professional
materials.