Classic Vespa
Pentagonal Spring-Loaded Needle with Brass Valve Dell'orto 200 for Carburetors PHB/VHSB 34LD/38DD/VHSH /VHST
For PHBL - PHBH carburetors
Needle diameter: 5 mm
Larchotek Dolomiti lamellar thermal group in aluminum (187 cc) for Vespa low headlight 125/150 VM-VN-VL-VB1T
Vespa 125 VM1T>VM2T
Vespa 125 VN1T>VN2T
Vespa 150 VL1T>VL3T
Vespa 150 VB1T
The LARCHOTEK Dolomiti 187 brings modern two-stroke engine technology into the world of classic Vespa Wideframe.
Thanks to the Ø63 mm bore, 60 mm stroke, and the reed valve intake directly on the cylinder, this thermal group allows for a generous displacement, high torque, and a wide range of use.
The Dolomiti 187 is not designed as an extreme cylinder in search of maximum performance, its goal is to offer a powerful, elastic, and pleasant-to-use road and touring engine: ready at low revs, progressive in delivery, and capable of comfortably handling even longer transmission ratios.
These features make it particularly suitable for Vespa Wideframe, which due to weight and gear ratio require an engine capable of developing good torque and maintaining it over a wide range of RPM.
The result is a more relaxed ride, with a quick throttle response and greater ease in overcoming climbs and challenging stretches.
The name Dolomiti perfectly encapsulates the philosophy of this project: an engine designed to tackle mountain roads, winding paths,
Larchotek Carezza Box expansion exhaust specific for 187cc thermal group Vespa 125VM1>2T/VN1>2T-150 VL1>3T-VB1T
Vespa 125VM1>2T/VN1>2T-150 VL1>3T-VB1T
The Carezza Box exhaust is designed to offer classic Vespa Wideframe models an exhaust system capable of combining high performance, great usability, and an extremely discreet appearance. Its design maintains a sober and unobtrusive look, in line with the original Vespa style.
Developed specifically for the LARCHOTEK Dolomiti 187 cm³ engine, it enhances the engine's torque characteristics and focuses on road and touring use.
The design is not focused on seeking a power increase concentrated solely at higher revs. The goal is to achieve a wide and usable power curve, with a good availability of power and torque over a broad operating range.
The result is an exhaust particularly suited for a Vespa Wideframe customized for daily use, to confidently tackle the most challenging extra-urban routes, hilly and mountainous roads, and long-distance journeys.
The Carezza Box thus allows for improved engine performance without significantly altering the classic image of the Vespa: a solution designed for those who desire more engine power, greater flexibility, and modern performance, while maintaining a traditional and unobtrusive aesthetic.
Pair of black aluminum footrests for Vespa 50 R/Special/Elestart/SR/90/R/125 PV/ET3/125 VNB2T 09001->/VNB3-6/GT/GTR/Super/TS/150 VBB1T 17451->/VBB2T/GL/Sprint/V/160 GS/180 SS/Rally
Vespa 50 V5A1T R 789905> Vespa 50 Special V5A2T 77696> Vespa 50 Special V5B1T>3T Vespa 50 Special Elestart V5A3T 5308> Vespa 50 Special V5B4T Vespa 90 V9A1T 57855> Vespa 125 Primavera VMA2T 52767> Vespa 125 Primavera ET3 VMB1T
Material: Aluminum
Set screw fastening
Diameter: 20 mm
Dell'Orto PHDG 24 carburetor for Vespa 50/90/125/150/200 Special-GT-GTR-TS-PX-GL-ET3
Adaptable to all models / All Models
Complete crankshaft Larchotek Passo Rolle Signature C60-115 for Vespa 125 VM/VN-150 VL/VB1T
Vespa 125 VM1T>VM2T
Vespa 125 VN1T>2T
Vespa 150 VL1T>VL3T
Vespa 150 VB1T
LARCHOTEK Passo Rolle Signature has been specially developed for powerful Vespa Wideframe engines and, in particular, for use with the LARCHOTEK Dolomiti cylinder kit of 187 cm³.
The Signature version also stands out for the use of a high-quality racing connecting rod.
Main features
Stroke of 60 mm and connecting rod of 115 mm
Complete odometer with black background, 140 km/h scale for Vespa 125 GTR-ET3/150 Sprint Veloce
Vespa 125 Primavera ET3 VMB1T
Vespa 125 GTR VNL2T
Vespa 150 Sprint Veloce VLB1T
Black background, scaled to 140 KM/H
Complete P&A speedometer for Vespa 125 GTR-ET3/150 Sprint Veloce
Vespa 125 Primavera ET3 VMB1T
Vespa 125 GTR VNL2T
Vespa 150 Sprint Veloce VLB1T
White background, scaled to 120 KM/H
With "Veglia borletti" brand and Piaggio logo (attention, not boxed Piaggio)
Vespa 50/125/150/160/180
For seat cover
Studs for fastening
Tapered floating carburetor needle SHA-PHBG-PHBN with large head: 3.5mm and spring
For PHBN-PHVA-PHVB carburetors
Original PIAGGIO engine case bolt M7x58 mm for Vespa 50/90/125 Primavera ET3-PK
Vespa 50 V5A1T N,L,R
Vespa 50 Special V5A2>3T
Vespa 50 Special V5B1>4T
Vespa 50 PK
Vespa 50 PK S
Vespa 50 PK XL
Vespa 50 PK XL Rush
Vespa 50 PK N
Vespa 90 V9A1T
Vespa 125 Primavera VMA1T>2T
Vespa 125 Primavera ET3 VMB1T
Quick-release hook for stands diameter 22 VZR for Vespa PK50-125 S/SS/XL/ETS/XL2/N/FL/Rush/Plurimatic/Automatica/PX80-200/PE/Lusso/'98/MY/T5/Cosa
Vespa 50 PK S/XL/N/HP
Vespa PK 125 S/XL/N/HP
Vespa 125 PX VNX1T 68767>
Vespa 150 PX VLX1T 124324>
Vespa 200 PE VX1T 33285>
Vespa PX/PE Rainbow Series
How many times have you "missed" the stand of your Vespa? 🛑🛵 Let's be honest: searching for it with your foot is never the most comfortable. That's why at VZR Special Parts we have created Easy. The name says it all: a simple, robust hook with a clean design that makes opening the stand immediate. Zero effort, just style. ✅ Why choose it?* Quick installation.* Maximum practicality in every situation.* VZR guaranteed quality.
Quick-release hook for 15 VZR diameter stands for Vespa 125 V30-33/150 VL/VS1/T2-3-VNA/VNB1-2T ->09000/150 VL3/VB/VBA/VBB1T->17450/GS VS2-5
Vespa 125 V30-33/150 VL/VS1/T2-3-VNA/VNB1-2T ->09000/150 VL3/VB/VBA/VBB1T->17450/GS VS2-5
How many times have you "missed" the stand of your Vespa? 🛑🛵 Let's be honest: searching for it with your foot is never the most comfortable. That's why at VZR Special Parts we created Easy. The name says it all: a simple, robust hook with a clean design that makes opening the stand immediate. Zero effort, just style.✅ Why choose it?* Quick installation.* Maximum practicality in every situation.* VZR guaranteed quality.
Gearbox shaft with 2 holes for cruciform alignment for Vespa 50-90-125 Primavera/ET3/PK
Vespa 50 V5A1T N/L/R 92877>
Vespa 50 S V5SA1T 111891>
Vespa 50 Special V5A2T>3T
Vespa 50 Special V5B1>4T
Vespa 90 V9A1T 25001>
Vespa 125 Primavera VMA1T>VMA2T
Vespa 125 Primavera ET3 144679>
Vespa 50/125 PK S/XL/N/HP
The new reinforced axle for Vespa smallframe engines is
made of high-strength steel with a related vacuum carburizing treatment.
The material used and the new sizing make the axle
particularly suitable for tuned engines or with displacements higher
than normal (even up to 250 ccm)
Today, thanks to recent investments by some manufacturers, it is
possible to find a wide range of very powerful thermal units on the market
that even exceed 40 horsepower.
I remind you that the Vespa smallframe engine was designed to last over
time and its power hardly exceeded 10 horsepower.
With these power increases, it is essential to adapt all the mechanisms to avoid breakages and premature wear.
Example of the new sizing. The threading has also been increased to M16x1.25
Oil seal MALOSSI 17x35x8 mm crankshaft flywheel/clutch side FKM/PTFE for Vespa 125 V1>15T/V30>33T
Vespa 125 V30>33T
FABBRI transparent windshield with raindrops for Vespa 80/125/150/200 PX-PE-Arcobaleno-Millenium
Vespa PX
Vespa PE
Vespa PK
Included: Brackets, screws, and assembly instructions
Size: 720x570 mm
Vespa 50 V5A1T N,L,R from 1966
Vespa 50 Special V5A2>3T
Vespa 50 Special V5B1>4T
Vespa 90 V9A1T
Vespa 125 Primavera VMA1T>2T
Vespa 125 Primavera ET3 VMB1T
The spacer is made of stainless steel to resist corrosion and prevent deformation, and it comes complete with 3 screws longer than the original ones to compensate for the added thickness, ensuring optimal thread grip.
Aluminum bushing for starter transmission Vespa 125 VN2T/VNA1T/125 VNA2T-150 VL3T/150 VB1T/150 GL VGL1T
Vespa 125 VN2T
Vespa 125 VNA1T
Vespa 125 VNA2T
Vespa 150 VL3T
Vespa 150 VB1T
Vespa 150 GL VGL1T
All models
Aeronautical ergal cable stop plate machined from solid (handlebars with external stops) for Vespa 125 Primavera VMA2T
Vespa 125 Primavera VMA2T (for handlebars with external clamps)
Rear shock absorber HITECH CARBONE "HTR" Oleopneumatic Gas multi-adjustable Black Edition version for Vespa 125/150/160/180/200 N-L-R-Special-Primavera- GT-GTR-Sprint-Rally-PX-PE
Vespa 125 VNB4T 114714 >
Vespa 125 Super VNC1T
Vespa 125 GT VNL2T
Vespa 125 GTR VNL2T
Vespa 125 TS VNL3T
Vespa 125 PX
Vespa 150 VBB2T 172370 >
Vespa 150 GL VLA1T
Vespa 150 PX
Vespa 150 Sprint VLB1T
Vespa 150 Sprint Veloce VLB1T
Vespa 180 Rally VSD1T
Vespa 200 Rally VSE1T
Vespa 200 PX
Vespa PX Arcobaleno
ADJUSTMENTS
Micrometric adjustment ring for spring preload
25-position register for hydraulic compression adjustment
TECHNICAL FEATURES
-Gas oleopneumatic shock absorber with separate reservoir
-Body and reservoir mount in Ergal, entirely machined from solid
-Upper mount in stainless steel
-Rod Ø 14 mm in hardened C45 steel
-Spring in hardened steel, wire Ø 7 mm
-High resistance black anodized finish, with titanium color details on spring preload ring and hydraulic compression register
NOTES
The HTR suspension is completely regenerable using exclusively original Hitech Carbone spare parts
Front shock absorber HITECH CARBONE "HTR" Oleopneumatic Gas multi-adjustable Black Edition version for Vespa 50/90/125 Special-N-L-R-Primavera-ET3-PKS/XL
Vespa 50 V5A1T N,L,R
Vespa 50 Special V5A2>3T
Vespa 50 Special V5B1>4T
Vespa 90 V9A1T
Vespa 125 Primavera VMA1T>2T
Vespa 125 Primavera ET3 VMB1T
Vespa 50 PK
REGULATIONS
Micrometric adjustment ring for spring preload
25-position register for hydraulic compression adjustment
TECHNICAL FEATURES
- Gas oleopneumatic shock absorber with separate reservoir
- Body and reservoir attachment in Ergal, entirely machined from solid
- Upper attachment in stainless steel
- Shaft Ø 14 mm in hardened C45 steel
- Spring in hardened steel, wire Ø 7 mm
- High-resistance black anodized finish, with titanium-colored details on spring preload ring and hydraulic compression register
NOTES
The HTR suspension is fully regenerable using exclusively original Hitech Carbone spare parts
Complete shock absorber for Vespa 125/150/200 V30-VM-VN-VNA-VNB-GT-GTR-TS-VBA-VBB-VB1-GL-Sprint-Sprint Veloce
Vespa 125 V30T > V33T (adaptable)
All models from '53 to '79
Excluding 125 Primavera ET3, PK, PX, PE
Metal sheath
Zinc-plated RMS CLASSIC right/left mirror bracket for all Vespa models
Vespa 50
Vespa 90
Vespa 125
Vespa 150
Vespa 180
Vespa 200
Galvanized
Quick-release hook for stands diameter 20 VZR for Vespa 50 R/Special/Elestart/SR/90/R/125 PV/ET3/125 VNB2T 09001->/VNB3-6/GT/GTR/Super/TS/150 VBB1T 17451->/VBB2T/GL/Sprint/V/160 GS/180 SS/Rally
Vespa 50 V5A1T R 789905> Vespa 50 Special V5A2T 77696> Vespa 50 Special V5B1T>3T Vespa 50 Special Elestart V5A3T 5308> Vespa 50 Special V5B4T Vespa 90 V9A1T 57855> Vespa 125 Primavera VMA2T 52767> Vespa 125 Primavera ET3 VMB1T
How many times have you "missed" the stand of your Vespa? 🛑🛵
Let's be honest: finding it with your foot is never the most convenient. That's why at VZR Special Parts we created Easy.
The name says it all: a simple, sturdy hook with a clean design that makes opening the stand immediate. Zero effort, just style.
✅ Why choose it?
* Quick installation.
* Maximum practicality in every situation.
* VZR guaranteed quality.
Complete Crimaz CMX EASY clutch for Vespa 125 VNB/GT-GTR-TS-PX-150 VL/VB1/VBB-VBA/GL/PX/Sprint/PX-180/200 Rally-PE
Vespa 125 VNBGT-GTR-TS-PX-150 VL/VB1/VBB-VBA/GL/PX/Sprint/PX-180/200 Rally-PE-Millenium-Cosa
Mount Cosa-Millenium type clutch sprockets
Weight---> 0.780 kg without sprocket
Wheel rim for Vespa 125/150/200 GT-GTR-TS-GS-GL-Sprint-Sprint Veloce-Rally-PX
Vespa 125 GT VNL2T
Vespa 125 GTR VNL2T
Vespa 125 TS VNL3T
Vespa 150 GS VS1>5T
Vespa 150 GL VLA1T
Vespa 150 Sprint VLB1T
Vespa 150 Sprint Veloce VLB1T
Vespa 180 Rally VSD1T
Vespa 200 Rally VSE1T
Vespa PX
Vespa PE
3.50/10
M 8 nuts and grower washers
Chrome plated
Kit 2 reed petals CCCorsa (thickness 0.4 mm) for Vespa 125 VNB-TS/150 VBA-Super/Rally/PX80-200/PE/T5/Cosa
Vespa 125 GT VNL2T
Vespa 125 GTR VNL2T
Vespa 125 TS VNL3T
Vespa 125 PX
Vespa 150 Sprint VLB1T
Vespa 150 Sprint Veloce VLB1T
Vespa 150 PX
Vespa 200 PE
Pair of elastic rings for CCcorsa thermal group for Vespa 125 VM/VN-150 VL/VB1T
Vespa 125 VM/VN-150 VL/VB1T
CCcorsa gasket kit for Cylinder group and reed valve block for Vespa 125 VM1>2T/VN1>2T
Vespa 125 VM1>2T
Vespa 125 VN1>2T
Vespa 150 VL1>3T
Vespa 150 VB1T
Rear sheet metal central tunnel for Vespa 125 VNA/VNB/GT/GTR/TS-150 VBA/VBB/GL/Sprint/PX/Rally/SS
Vespa 125
Vespa 150
Vespa 160
Vespa 180
Vespa 200
Width: 22/26 cm Height: 7/10.8 cm
Vespa 125 VM1T>VM2T
Vespa 125 VN1T>VN2T
Vespa 125 VNA1T>VNA2T
Vespa 125 VNB1T>VNB6T
Vespa 125 Super VNC1T
Vespa 125 GT VNL1T
Vespa 125 GT VNL2T
Vespa 125 GT R VNL2T
Vespa 125 TS VNL3T
Vespa 150 VL1T>VL3T
Vespa 150 VB1T
Vespa 150 VBA1T
Vespa 150 VBB1T>VBB2T
Vespa 150 GL VGL1T
Vespa 150 GL VLA1T
Vespa 150 Super VBC1T
Vespa 150 Sprint VLB1T
Vespa 150 Sprint Veloce VLB1T
Vespa 160 GS VSB1T
Vespa 125 Super VNC1T
Vespa 150 Super VBC1T
Complete electrical system for Vespa 125 VNB2T < VNB6T Vespa 150 Sprint VLB1T
Vespa 125 VNB2T > VNB6T
Vespa 150 Sprint VLB1T
Electrical system for Vespa 125 GT/GTR/TS-150 VBB2T/Sprint V/180 Rally/SS
Vespa 125 GTR VNL2T
Vespa 125 TS VNL3T
Vespa GT
Vespa 150 VBB2T
Vespa 150 Sprint Veloce VLB1T
Vespa 180 SS VSC1T (without battery)
Vespa 180 Rally VSD1T
Vespa 50 V5A1T N,L,R
Vespa 50 Special V5A2>3T
Vespa 50 Special V5B1>4T
Vespa 90 V9A1T
Vespa 125 Primavera VMA1T>2T
Vespa 125 Primavera ET3 VMB1T
All models / Tutti i modelli
Fully synthetic lubricant with Alpha-Tech® for limited slip differentials and "Transaxle" transmissions, even under heavy stress.
Performance levels:
API GL-5, SAE J2360.
LED bulb holder for Vespa 125/150/180 GTR-TS-Sprint V-Rally
Vespa 125 GTR VNL2T
Vespa 125 TS VNL3T
Vespa 150 Sprint 0118590 >
Vespa 150 Sprint Veloce VLB1T
Vespa 180 Rally
Vespa 200 Rally
It mounts in place of the original lamp holder. Red LEDs, no battery needed (works in AC and DC both at 6v and 12v)
Vespa 80/125/150/200 PX
Included: Lock (Zadi)