Classic Vespa
Vespa 50
Vespa 90 V9A1T
Vespa 125 Primavera VMA1T>2T
Vespa 125 Primavera ET3 VMB1T
Single-seater, fiberglass paintable frame, adhesive foam seat.
Attention-->Sport seat without zipper, it is mounted using 2 supplied screws.
To refuel, it must be disassembled or a hole must be made in the corresponding area (silmil racing)
Vespa 50/90/125 Primavera ET3
Material: Aluminum
Application: Carburetors 24:24
Vespa 200 Rally VSE1T
Vespa P 200 E VSX1T
Vespa PX 200 E VSX1T
Vespa PX 200 E Rainbow VSX1T
Vespa PX 200 E Rainbow Elestart VSX1T
Thicknesses--> 0.10mm/0.15mm
Modified DRT bearing for ETS crankshaft mounting on original crankcase
Vespa 50/90/125 Primavera ET3
Vespa 50/125 PK S/XL/N
By following the instructions and performing a very simple connection to the casing, it will be possible to install a housing with the 25x38x15 roller bearing inside, allowing the installation of the much more efficient ETS crankshaft.
Vespa 125 Super VNC1T > 011000
Vespa 150 VBB1>2T
Length: 120mm
Bearing seat 12mm, bushing seat 11.5mm
100% MADE IN ITALY
Vespa 125 Primavera VMA1>2T
Vespa 125 Primavera ET3 VMB1T
Vespa 125 PK
Vespa 50 PK XL Elestart V5X3T
Vespa 50 PK XL2/ Elestart V5X3T
Vespa 50 PK FL V5N1T
Vespa 50 PK HP V5N2T
Vespa 50 PK N V5X5T
Vespa 125 ETS VMS1T Elestart
Vespa 125 PK S Elestart VMX5T
Vespa 125 PK XL Elestart VMX6T
Vespa 125 PK XL2 VMX6T
Vespa 125 N (FL) VMX7T
6-Wire Stator composed of: 3-Wire round connector: Green, black, and blue; 3 Wires of color: white, green, red.
Vespa 125 VNB1>6T
Vespa 125 Super VNC1T
Vespa 125 GT VNL1T
Vespa 125 GT VNL2T
Vespa 125 GT R VNL2T
Vespa 125 TS VNL3T
Vespa P 125 X VNX1T
Vespa PX 125 E VNX2T
Vespa 125 PX E Arcobaleno VNX2T
Vespa 125 PX E Arcobaleno Elestart VNX2T
Vespa 125 PX Euro 2
Vespa 125 PX 30 Years
Vespa 125 PX CAT ZAPM50100 '07
Vespa 125 PX VNX1T Millennium '98>'05
Vespa 125 Cosa VNR1T
Vespa 125 Cosa 2 VNR2T
Vespa 125 PX 2011 ZAPM74100 2T AC
Diam. 52.5 mm with short threading
Vespa 50 V5A1T N,L,R
Vespa 50 PK
Vespa 90 V9A1T
Vespa 125 Primavera VMA1>2T
Vespa 125 Primavera ET3 VMB1T
Vespa 125 PK
Balanced, raised, and treated basket (anti-groove), ground sliding plane, complete with shock absorbers.
Ratio--> 2.54
Cable tightening ring for speedometer on hub for Vespa 160 GS/180 SS
Vespa 160 GS VSB1T
Vespa 180 SS VSC1T> 0030419
In galvanized steel
Insulating hood for electronic control unit for Vespa 125 Primavera ET3 VMB1T
Vespa 125 Primavera ET3 VMB1T
Vespa 50 V5A1T N/L/R
Vespa 50 Special V5A2>3T
Vespa 50 Special V5B1>4T
Vespa 50 PK
Compatible with carburetors 16:10/16:16
Vespa 50/90/125
Diameter: 19 mm
Compatible with Polini CP carburetors
Vespa 50 PK XL/N/HP
Vespa 125 PK XL/N/HP
Vespa 125 PK ETS VMS1T
Main feature: 3-hole flange
Suitable for 19/19 carburetor
Fitting like the original
Vespa 125 Primavera, Vespa 125 Primavera ET3
With Approval D.G.M. 37519 S
Painted in black color
Vespa 50 PK S/XL/N
Painted, with aluminum silencer
Blue
257x357x10 mm
Vespa 50/90/125/150/160/180/200
Vespa 125 VNA1T
Note: Cut to size on original samples.
Vespa 125 Primavera VMA1>2T
Vespa 125 Primavera ET3 VMB1T
Vespa 125 PK
Bore: 57
Stroke: 51
Vespa 50 V5A1T 92877>
Vespa 50 Special V5A2>3T
Vespa 50 Special V5B1>4T
Vespa 90 V9A1T 22235>
Vespa 125 Primavera VMA1T>2T
Vespa 125 Primavera ET3 VMB1T
53x38x6 cm
Vespa 50 PK XL/N/HP
Vespa 125 PK S/XL/N/HP
Vespa 125 PX VNX2T
Vespa 150 PX VLX1T
Vespa 200 PE VSX1T
Size: M 10x 65 mm
Included: Grower and low nut
Vespa 50/90/125/150/160/180/200
Vespa 125/150/200 PX from 1998 to 2012
Kit composed of: 2 rings-->32x37.5x3/ 2 rings-->32x37x32.5 2 o-rings and 1 cap.
Vespa PE 200
Vespa 200 Rally VSE1T
Painted in black
Vespa 125 Nuova VMA1T
Vespa 125 Primavera VMA2T
Vespa 125 Primavera ET3 VMB1T
The new power exhausts have been recalculated, featuring a modern and bold design, very high-performing.
Vespa 125 Primavera VMA1>2T
Vespa 125 Primavera ET3 VMB1T
Vespa 125 PK S/XL
By clicking on purchase, all available sizes will be displayed
Vespa 125 from 1953
Vespa 150 from 1954
Vespa 160
Vespa PX
Vespa PE
Vespa 125 GTR VNL2T 145901>
Vespa 125 PX
Vespa 125 TS VNL3T 18139>
Vespa 125 PK ETS VMS1T
Vespa 125 PK
Vespa 150 Super VBC1T 412374>
Vespa 150 Sprint Veloce VLB1T 0294260>
Vespa 150 PX
Vespa 200 Rally VSE1T 0033997>
Vespa 200 PE
Vespa 50 PK XL/N/HP
Vespa 125 PK XL/N/HP
Vespa 125 PK ETS VMS1T
Main feature: 3-hole flange
For tires 3.00x10, 3.50/10
Economic Version
Vespa 125 PX CAT ZAPM50100 '07
Vespa 125 PX VNX1T Millenium '98>'05
Vespa 150 PX VLX1T Millenium '98
Vespa 200 PE VSX1T Millenium '98
Dimensions--> 110x42mm
Pair of DR 90 cc segments from diameter 50 to diameter 50.8 mm
Vespa 50 V5A1T N,L,R, Vespa 50 Special V5A2>3T, Vespa 50 Special V5B1>4T, Vespa 50 PK, Ape 50
By clicking on purchase, all available sizes will be displayed
Thickness--> 1.5 mm
Vespa 80 PX
Vespa 125 PX
Vespa 150 PX
Vespa 200 PE VSX1T
Vespa 125 Primavera VMA1T>2T
Vespa 125 Primavera ET3 VMB1T
Vespa 125 Super VNC1T
Vespa 150 Super VBC1T
Diameter: 115 mm
Vespa 50 V5A1T N,L,R
Vespa 50 Special V5A2>3T
Vespa 50 Special V5B1>4T
Vespa 50 PK S
Vespa 90 V9A1T
Vespa 125 Primavera VMA1T>2T
Vespa 125 Primavera ET3 VMB1T
Vespa 125/150/200 PX Rainbow
Vespa 125/150 PX
Vespa 50 N V5A1T
Vespa 50 L V5A1T
Vespa 50 R V5A1T
Vespa 50 Special V5A2T
Vespa 50 Elestart V5A3T
Vespa 50 Special V5B1T
Vespa 50 Elestart V5B2T
Vespa 50 Special V5B3T
Vespa 50 Elestart V5B4T
Length--> 44 mm