Classic Vespa
Vespa 125 T5 VNX5T
Vespa 125 PX T5 VNX5T
Vespa 200 Rally VSE1T
Vespa 200 Cosa VSR1T
Vespa 200 PE VSX1T
Specifically designed for wire exchange
The brass pad does not mark the wire.
Premium quality shield metal sheet for Vespa 50 N/L/R-125 Primavera VMA1T/VMA2T-ET3
Vespa 50 V5A1T N,L,R
Vespa 90 V9A1T
Vespa 125 Primavera VMA1T (Adaptable)
Vespa 125 Primavera VMA2T
Vespa 125 Primavera ET3 VMB1T
Crossbars and reinforcements NOT included, Raw finish
Dimensions: Width up to the height of the brake pedal --->42 cm then it narrows like the original to 41 cm.
Total length-->128 cm Thickness--> 10/10 (like the original)
Vespa 50 Special V5A2>3T
Vespa 50 Special V5B1>4T
Vespa 160 GS/ 180 SS
Maximum stability and torsion resistance: prevent any bending or sagging.
Premium quality: tested and proven directly in competition.
Specific lengths: custom cut for each individual scooter model.
Plug & Play installation: ready to use, no modifications or adjustments required.
Marked gear cables: individually numbered on both ends (1-1, 2-2) to avoid assembly errors.
Stainless steel inner wires: completely rustproof.
Welded ends: inner cables do not fray during installation.
Outer sleeves coated in PE: high-strength material for long-lasting protection.
Ultra-flexible throttle cable: 49-strand inner core ($7 \times 7$), designed not to kink or jam even in very tight bends.
Reinforced clutch, brake, and gear cables: 19-strand inner core to ensure maximum break resistance and superior durability.
Pre-stretched gear cables: subjected to preload to ensure precise and immediate gear shifts, with a rounded anti-friction profile.
Pre-lubricated clutch and brake cables: ready to slide effortlessly.<
Luminous body with reflector and black canopy for Vespa 50 Special 1°
Vespa 50 Special V5B3>4T
Black roof
Vespa PK 50 XL FL/HP/N/XL2 /Cosa
Flywheel for electronic ignition VMC cone 20 kg.1.4 complete with stator for Vespa 50 N/L/R-Special/125/Primavera/ET3/PK/S
Vespa 50 V5A1T N,L,R, Vespa 50 Special V5A2>3T, Vespa 50 Special V5B1>4T, Vespa 125 Primavera VMA1T>2T, Vespa 125 Primavera ET3 VMB1T
Gear selector prisoner m7x50 for Vespa 125-200 VNA-VBA-GT-TS-PX T5/Cosa
Vespa 125-200 VNA-VBA-GT-TS- PX T5/Cosa
Complete sport RDV Race one seat in black with black stitching for Vespa 80/125/150/200 VNB-VBB-VBA-Super-Sprint-GT-GTR-GL-PX
Vespa 125 VNA1>2T
Vespa 125 VNB1>6T
Vespa 125 Super VNC1T
Vespa 150 VBA1T
Vespa 150 VBB1>2T
Vespa 125 GT VNL1>2T
Vespa 125 GTR VNL2T
Vespa 125 TS VNL3T
Vespa 150 Sprint VLB1T
Vespa 150 Super VBC1T
Vespa 150 GL VLA1T
Vespa 150 Sprint Veloce VLB1T
Vespa PX PE first series
The brand new " RDV race one " sport saddle is a perfect combination of sporty aesthetics (black stitching, sporty seat in harmony with the Vespa curves) and good comfort (metal base, 2.5 cm foam for the seat), innovative magnetic closure to ensure the best aesthetic result, entirely designed and conceived by our Staff, made with the technical support of the company Nisa SRL. 100% MADE IN ITALY
Note: For PX/PE models, it fits perfectly ONLY on tanks with a wing nut cap.
For PX/PE Arcobaleno models with a quick release cap, it can be installed by removing or lowering the central buffers provided (otherwise the central part touches before the rear part)
In the new model, the RDV logo is embossed on the rear.
Vespa PX PE T5
Primary couple with extended Malossi ratio (Z 24/63) for Vespa 200 PX-Rally-Cosa
Vespa 200 Rally VSE1T
Vespa P 200 E VSX1T
Vespa PX 200 E VSX1T
Vespa PX 200 E Arcobaleno VSX1T
Vespa PX 200 E Arcobaleno Elestart VSX1T
Vespa 200 PE VSX1T Millennium '98
The HTQ Malossi gears for Vespa PX inherit the legacy of the first gear project produced by Malossi between the late 80s and early 90s.
Completely redesigned, this pair of primary gears uses a straight-tooth configuration instead of the standard helical ones.
Malossi has worked hard to ensure the exceptional quietness of the gears, achieved with special machining of the teeth and their contact surfaces, meticulously finished and verified with an evolventimeter.
The HTQ Malossi gears are made using exclusively materials that exceed the strict standards imposed by our technicians with rigorous tests and trials.
The final processing uses numerically controlled machines, after which the HTQ Malossi gears undergo a complete thermochemical carburizing treatment at 900°C, giving them the required hardness and strength.
The size and quality of the finished gears are finally verified on Zeiss three-dimensional control machines.
Coupled in pairs to respect the correct operating clearance, the HTQ Malossi gears are the most precious gift a true romantic enthusiast can give to their Vespa.
Original Piaggio Turn Signal Relay For Vespa 125/150/200 PX-PE New Model 2011-2012
Vespa PX
Vespa PE
Vespa PX Arcobaleno
Vespa Cosa
Vespa PK all types
6-12 VOLT, 10/21 WATT
Vespa 125 VNB1>2T
Alternating current 12 volts
For electronic ignition modification
Light switch for Vespa 125 VNA1>2T/125 VNB1>2T/150 VB1T/150 VBA1T> 76049
Vespa 125 VNA1>2T
Vespa 125 VNB1>2T
Vespa 150 VB1T
Vespa 150 VBA1T> 76049
3 positions
Chrome cover
2 Carbon Plates Kit MALOSSI 100x100mm (thickness 0.3mm) for Vespa 125 VNB-TS/150 VBA-Super/Rally/PX80-200/PE/T5/Cosa
Vespa 125 GT VNL2T
Vespa 125 GTR VNL2T
Vespa 125 TS VNL3T
Vespa 125 PX
Vespa 150 Sprint VLB1T
Vespa 150 Sprint Veloce VLB1T
Vespa 150 PX
Vespa 200 PE
for VHSB/VHSC carburetor
Black light switch cover for Vespa 50/90/125 Primavera/GT/GTR/VNB/Sprint/Rally
Vespa 50 V5A1T N,L,R
Vespa 90 V9A1T
Vespa 90 V9SS1>2T
Vespa 125 VNB2>6T
Vespa 125 Super VNC1T
Vespa 125 GT VNL2T
Vespa 125 GTR VNL2T
Vespa 125 TS VNL3T
Vespa 125 Primavera VMA1T>2T
Vespa 150 VBB2T
Vespa 150 Sprint VLB1T
Vespa 150 Sprint Veloce VLB1T
Vespa 150 Super VBC1T
Vespa 180 SS VSCT ( without battery )
Vespa 180 Rally VSD1T
Vespa 150 GS VS1T>VS5T
Vespa 125 VN1>VN2T
Vespa 150 VL1>VL3T
Vespa 150 VB1T
Vespa 150 GL VGL1T (Foreign)
Finish: Burnished
Zinc Plated Blind Rivet Nut Kit for Saddle and Luggage Rack Mounting
Vespa 150 VL1T>3T
Vespa 150 VB1T
Measurements: M 8 with a 14 mm wrench
Vespa 125 V1T
Vespa 125 V11T>V12T
Vespa 125 V13T >71499
In galvanized steel
Vespa 150 GS VS1>5T
Pair of tank mounting brackets for Vespa V13T 71500>15T - V30T>33T - VU1T - VM1T>2T
Vespa 125 V1T>15T 71499>
Vespa 125 V30>33T
Vespa 125 VM1>2T
Vespa 125 U VU1T
Finish: Burnished/Phosphated
Bronzed
Vespa 125 VNA1>2T
Vespa 125 VNB1>5T
Vespa 150 VL1>3T
Vespa 150 VB1T
Vespa 150 VBA1T
Vespa 150 VBB1>2T
In galvanized metal
Vespa 50/125 PK XL/N/HP
Vespa 80/125/150/200 PX
Vespa 150 GS VS5T 0082389>
Vespa 160 GS VSB1T
Chrome Finish
countersunk washer luggage rack Vespa 125 V30>33T Vespa 125 VM1>2T Vespa 125 VN1>2T Vespa 150 VL1>3T Vespa 150 VB1T
Vespa 125 V30>33T
Vespa 125 VM1>2T
Vespa 125 VN1>2T
Vespa 150 VL1>3T
Vespa 150 VB1T
Finish: Burnished
Tank and seat fastening
Tank and seat fixing
5 Pcs Kit
Zincate, 10 pieces
Compatible with all Vespa models EXCEPT for Vespa 160 GS
Vespa 50 V5A1T
Vespa 90 V9A1T from 1963
Vespa 125 Primavera VMA1T>2T from 1965
Complete rear brake hose with fittings for Vespa Cosa 1/2 125-150-200
Vespa 125 Cosa 2 VNR2T
Vespa 150 Cosa 2 VLR2T
Vespa 200 Cosa 2 VSR1T
for VHSB/VHSC carburetor
Bolt for starter pedal fastening for Vespa 125 VNB/GT/GTR-150 VBB/Super/GL/160 GS/180SS/Rally
Vespa 125 VNB4>6T
Vespa 125 GT VNL2T
Vespa 125 GTR VNL2T> 146200
Vespa 125 Super VNC1T
Vespa 150 VBB2T
Vespa 150 Super VBC1T> 428216
Vespa 150 GL VLA1T
Vespa 150 Sprint VLB1T
Vespa 150 Sprint Veloce VLB1T
Vespa 160 GS VSB1T
Vespa 180 SS VSC1T
Vespa 180 Rally VSD1T
Vespa 200 Rally VSE1T > 0035413
Finish: Galvanized
Vespa 50 Special V5B1>4T
Vespa 50 V5SA1T
Vespa 90 V9A1T
Vespa 125 Primavera VMA1T>2T
Vespa 125 Primavera ET3 VMB1T
Vespa PK
Load index 50J, tubeless