VMC
Thermal group VMC ET6-60 144cc Ø 60mm and stroke 51mm Vespa 50/125-Ape 50
Vespa 125 Primavera VMA1>2T
Vespa 125 Primavera ET3 VMB1T
Vespa 125 ETS
Vespa 125 PK
6-port aluminum cylinder, shell moulding technology, Nikasil-treated liner
Bore diameter 60mm Stroke 51mm Displacement 144cc SINGLE PORT EXHAUST
Main Transfer Phases 126° Exhaust 186°, exhaust stud spacing 56mm, exhaust outlet diameter 32mm
Piston with 2 Rik steel rings complete with pin and clips.
Die-cast aluminum head with SIDE spark plug and 4 additional fixing screws.
Squish 1.1mm ± 0.1mm. Tightening torque for M7 studs: 11÷12 Nm, Tightening torque for M6 screws 10÷11 Nm
Complete with bolts and cylinder gaskets of various thicknesses.
It is a versatile cylinder suitable for mild tuning as well as more extreme modifications.
With more generous expansion exhausts like the VMC EVO 52, it transforms into a classic 2-stroke racing engine.
When fitted with the Vmc Siluro Sport, the cylinder becomes a fast touring engine with generous torque from low revs and excellent top-end.
Note: To be mounted on
Thermal group VMC ET6-60 144cc Ø 60mm and stroke 51mm Vespa 50/125-Ape 50
Vespa 125 Primavera VMA1>2T
Vespa 125 Primavera ET3 VMB1T
Vespa 125 ETS
Vespa 125 PK
7-port aluminum cylinder, shell moulding technology, Liner with Nikasil treatment
Bore diameter 60mm Stroke 51mm Displacement 144cc, EXHAUST PORT WITH BOOSTERS
Main Transfer phases 128° Exhaust 188°, exhaust stud spacing 60mm, oval exhaust outlet diameter 32mm
The exhaust that with a slight filing can be enlarged to 36mm to fit our Evo SeiDue and Kifly 62 exhausts
Piston with 2 steel Rik rings, complete with pin and clips.
Die-cast aluminum head with SIDE spark plug with 4 additional fixing screws.
Squish 1.1mm ± 0.1mm. Tightening of M7 studs: 11÷12 Nm, Tightening of M6 screws 10÷11 Nm
Complete with bolts and paper cylinder gaskets of various thicknesses.
It is a cylinder suitable for extreme modifications.
Mounted with a VMC Evo 62 it requires a close-ratio gearbox and with more generous expansion exhausts like the VMC Kifly 62 can reach power levels around 30hp
Complete thermal group VMC KAPPA-58 (135 cc) for Vespa 50 Special V5B3T/90 V9A1T-125 Primavera ET3-PK-Ape 50
Vespa 125 Primavera VMA1>2T
Vespa 125 Primavera ET3 VMB1T
Vespa 125 ETS
Vespa 125 PK
Bore diameter 58mm Stroke 51mm Connecting rod 97mm Displacement 135cc
Timing: Main transfers 122° Exhaust 180°
Two-ring aluminum alloy piston with high silicon content.
CNC machined die-cast aluminum head
Steel rings Steel pin Steel clips
It mounts with crankshafts with 51mm stroke and 97mm connecting rod
No need to file or remove the dust cover half-moon on the engine crankcase.
Paired with the VMC Siluro exhaust, it becomes an engine with power always available while maintaining the reliability of the original engine with a classic look and sound.
The perfect modification for your Vespa.
Complete thermal group VMC T-58 (114 cc) for Vespa 50 N-L-R-Special-PK-XL-N-HP-FL Ape 50
Vespa 50 V5A1T N,L,R Vespa 50 Special V5A2>3T Vespa 50 Special V5B1>4T Vespa 50 PK Ape 50
VMC has designed this kit to provide a breath of fresh air compared to the competition. The T-58 is a cylinder with modern duct fluid dynamics designed to develop substantial torque from low and medium revs.
The perfect cylinder to revitalize Piaggio Ape and Vespa 50 engines
High-quality perlitic cast iron thermal group kit of 114cc
For "short" stroke crankshafts 43 mm, Bore diameter 58mm, 6 transfers, Phases 124°-172°
Recommended squish 1.1~1.2mm, Compression ratio with squish at 1.2mm: 9.85:1
Exhaust outlet diameter 28mm, Exhaust stud distance 52mm
Aluminum cast head with long thread side spark plug
The kit includes 4 m6 Allen screws for better head fastening and 4 m7 studs specific for the cylinder
which eliminate the inconvenient fastening system typical of other short stroke cylinders for smallframe Vespa on the market.
Complete thermal group VMC CP58 135 cc (low shroud) for Vespa 50 V5A1T L/N/R-Special-PK-Ape 50
Vespa 50 V5A1T L/N/R-Special-PK
6-port aluminum cylinder, shell moulding technology, cylinder and bore with Nikasil treatment by Gilardoni
-Bore diameter 58mm Stroke 51mm Rod 97mm Displacement 135cc
-Timings: Main transfers 122° Exhaust 180°
-High silicon content bifacial aluminum alloy piston.
-Fits with 51mm stroke crankshafts and 97mm rods
-Recommended spark plug: NGK BR9ES
-Recommended ignition timing: 17°
Complete thermal group VMC CP60 144 cc (low shroud) for Vespa 50 V5A1T L/N/R-Special-PK-Ape 50
Vespa 50 V5A1T L/N/R-Special-PK
6-port aluminum cylinder, shell moulding technology, cylinder and liner with Nikasil treatment by Gilardoni
-Bore diameter 60 mm Stroke 51mm Connecting rod 97mm Displacement 144cc
-Timing: Main ports 122° Exhaust 180°
-High silicon content bifacial aluminum alloy piston.
-Fits with 51mm stroke crankshafts and 97mm connecting rod
-Recommended spark plug: NGK BR9HS
-Recommended ignition timing: 17°
Complete aluminum thermal group VMC Type R (114 cc) for Vespa 50 N-L-R-Special-PK-XL-N-HP-FL-Ape 50
Vespa 50 V5A1T N,L,R Vespa 50 Special V5A2>3T Vespa 50 Special V5B1>4T Vespa 50 PK Ape 50
VMC has designed this kit to bring a breath of fresh air compared to the competition
The TYPE-R 58 is a cylinder with modern duct fluid dynamics designed to develop substantial torque already at low and medium revs
The perfect cylinder to liven up Piaggio Ape and Vespa 50 engines
Thermal group kit in aluminum with high-quality Nikasil coating for a total displacement of 114cc
The kit fits on "short" stroke crankshafts 43 mm, bore diameter 58mm, 6 transfers, Phases approximately 124°-172°
Exhaust outlet diameter 28mm, Exhaust stud spacing 52mm
Cast aluminum head with side long-thread spark plug
The kit includes 4 m6 Allen screws for better head fastening and 4 m7 studs specific for the cylinder
which eliminate the inconvenient fastening system typical of other short-stroke cylinders for smallframe Vespa on the market.
Complete thermal group VMC SUPER G 2.0 for 2-Transfer crankcase (177 cc) in cast iron for Vespa 125 VNB1>6T, Vespa 125 GT VNL1>2T, Vespa 125 GTR VNL2T, Vespa 150 VBB1>2T, Vespa 150 GL VLA1T, Vespa 150 Sprint VLB1T
Vespa 125 VNB1>6T, Vespa 125 GT VNL1>2T, Vespa 125 GTR VNL2T, Vespa 150 VBB1>2T, Vespa 150 GL VLA1T, Vespa 150 Sprint VLB1T
The VMC SUPER G 2.0 is specifically designed for 2-port crankcases for Vespa Large Frame 125/150. This kit differs from the version for 3-port crankcases thanks to the use of a dedicated piston and specific adapter plate, designed to ensure correct assembly and the best performance on this configuration.
The kit stems from VMC's constant commitment to developing advanced technical solutions and using high-quality materials, with the aim of satisfying even the most demanding Vespa enthusiasts.
The shape of the ports at the base of the cylinder has been deliberately kept conservative, allowing for plug & play installation on original crankcases without the need for base machining. For those who wish to achieve superior performance, the ports can still be widened and matched, increasing the flow and improving the overall performance of the engine.
The cylinder also features an innovative exhaust design, developed after numerous studies and tests by the VMC team. This configuration optimizes the torque curve, offering progressive accelerations and a more lively ride. To maintain these characteristics unchanged, any modification to the exhaust shape is strongly discouraged.
Flat type cross with reinforced thread VMC for Vespa PX 125/150/200 Arcobaleno 2°/'98/MY/'11/T5/Cosa adaptable to LML Star 125-200 2T/4T/Deluxe 2T/4S
Vespa 125 PX VNX2T 232053>
Vespa 125 T5 VNX5T
Vespa 125 Cosa
Vespa 150 PX 624302>
Vespa 150 Cosa
Vespa 200 PE VSX1T 315267>
Vespa 200 Cosa
Reinforced Flat VMC Cross for Vespa large frame, PX '84, MY, T5, COSA
Made of special steel with related vacuum carburizing treatment with a surface hardness of 56/60 HRC
A chamfer has been machined on the corners of the cross ends to preserve the integrity of the gears and the selector
The cross has slightly increased dimensions compared to the original ones, which might require small adjustments to be made on the wheel axle before assembly.
VMC engine oil breather for Vespa V50/PV/ET3/PK/S/XL/XL2/FL/VNA-PX/T5/Cosa
All models / Tutti i modelli
VMC Oil Breather for Vespa Large and Small Frame Crankcase
An essential option for those who mount Vespa large frame clutches like the VMC 10 Springs and clutches based on the Piaggio 8 springs model type "cosa2"
The VMC breather extended upwards allows more engine oil to be inserted into the engine crankcase than specified in the Piaggio manuals, avoiding premature wear of the clutch components
Steel screw with black anti-corrosion treatment
Hexagon for fastening with 10mm wrenches
Leakage locking system in aluminum at the top of the tube.
Flywheel for electronic ignition VMC cone 20 kg.1.4 complete with stator for Vespa 50 N/L/R-Special/125/Primavera/ET3/PK/S
Vespa 50 V5A1T N,L,R, Vespa 50 Special V5A2>3T, Vespa 50 Special V5B1>4T, Vespa 125 Primavera VMA1T>2T, Vespa 125 Primavera ET3 VMB1T
Air box VMC VENTURI for Vespa 125 TS /150 Sprint V./Rally/P80 -200E/PX80-200E/Lusso/'98/MY /'11/T5
Vespa 80/100/125/150/200 PX PE
The venturi hole is Ø 26mm and fits perfectly with carburetors of this size. To adapt it to smaller carburetors, it is necessary to file the first part of the carburetor's intake duct, while for carburetors with a diameter greater than 26mm, it is necessary to slightly file the venturi to fit the carburetor's diameter.
Advantages:
Improves engine performance
Increases power, acceleration, and top speed
Compatible with carburetors with or without a mixer
Possibility to mount an air filter directly in the box
Refined and classic look
Indeformable aluminum body
Ignition flywheel nut VMC cone 20 for Vespa 50/125 PK XL-N-HP-FL-Vespa 50/90/125 Primavera ET3 cone 20-PX80-125-150-200/PE/Cosa/T5
Vespa 50/125 PK XL-N-HP-FL-Vespa 50/90/125 Primavera ET3 cone 20
Flywheel nut electronic ignition cone 19 for Vespa 50 L/Special/90/125 Primavera VMA2T-ET3
Vespa 50 V5A1T N,L,R, Vespa 50 Special V5A2>3T, Vespa 50 Special V5B1>4T, Vespa 125 Primavera VMA1T>2T, Vespa 125 Primavera ET3 VMB1T
Complete thermal group BGM PRO for 2-Port engine cases (177 cc) in aluminum for Vespa 125 VNB1>6T, Vespa 125 GT VNL1>2T, Vespa 125 GTR VNL2T, Vespa 150 VBB1>2T, Vespa 150 GL VLA1T, Vespa 150 Sprint VLB1T
Vespa 125 VNB1>6T, Vespa 125 GT VNL1>2T, Vespa 125 GTR VNL2T, Vespa 150 VBB1>2T, Vespa 150 GL VLA1T, Vespa 150 Sprint VLB1T
BGM PRO 177 Cylinder - Vespa 125-150 cm³ (2 channels) | early Largeframe models 1958-1979
Compatible: Vespa Largeframe 125 and 150 with 2 channels - VNB1-6, VNS1-6, VNC1T, VNL1-2, VBA1T, VBB1-2, VGLA-B, VLA1T and transition models GTR125 (VNL2T) up to 138956, Sprint150 (VLB1T) up to 105199, Super150 (VBC1T) up to 328128
More torque for early engines: The BGM PRO 177 is a thermally stable aluminum cylinder for Vespa Largeframe 125 and 150 cm³ with two overflow channels (2 channels). Ideal as an upgrade for everyday touring, with a wide frequency band - cleanly tunable, suitable for long distances and a robust base for subsequent configurations.
Glossy black aluminum tubeless VMC rim 2.10/10 for Vespa 50-125/PV/ET3/PK/S/XL/XL2/125 GT-TS/150 GL/GS VS5T/Sprint/V/T4/Rally/PX/PE/Lusso/T5/LML Star/DLX/Deluxe 2T/4T
Vespa 50/80/90/125/150/160/180/200
Size--> 2.10-10" with pre-installed valve
Usable with tires: - 3.00 x 10 - 3.50 x 10 - 90/90-10
VMC tubeless aluminum rim in gray color 2.10/10 for Vespa 50-125/PV/ET3/PK/S/XL/XL2/125 GT-TS/150 GL/GS VS5T/Sprint/V/T4/Rally/PX/PE/Lusso/T5/LML Star/DLX/Deluxe 2T/4T
Vespa 50/80/90/125/150/160/180/200
Size--> 2.10-10" with pre-installed valve
Black brackets for fixing canister/bag on platform for Vespa 125/150/160/180/200
All models
VMC SILURO SPORT exhaust painted in Black for Vespa 125 Primavera-Primavera ET3
Vespa 125 Primavera VMA1T>2T
Vespa 125 Primavera ET3 VMB1T
VMC SILURO SPORT Exhaust for Vespa small frame
The exhaust has been designed and developed to be super performant while maintaining a classic and original look and sound.
It is entirely constructed from stamped steel sheets and assembled
by artisan welders with decades of experience in making
2-stroke exhausts.
The VMC SILURO "SPORT" version has an exhaust flange with a diameter of 32mm and
slotted mounting holes that adapt to cylinders with a stud spacing of 52, 56, and 60mm.
It fits very well with high-performance cylinders such as the VMC GS series in
cast iron, the aluminum VMC ET6 and ET7 cylinders both 135cc and 144cc,
Pinasco Zuera, Quattrini M1 series (M1 56-60, M1-60B, M1L 56-60), the
EGIG 170cc cast iron cylinder, etc.
This exhaust enhances and unleashes the engine's power and torque
right from low revs with an over-rev that can reach over 10
VMC crankshaft stroke 43, cone 20, rod 87 cnc for Vespa 50 PK XL/N/HP/FL
Vespa 50 PK XL /N/HP
Ape 50
stroke 43, cone 20, rod 87 cnc
VMC ROTARY VALVE crankshaft, stroke 43, cone 20, rod 87 cnc, for Vespa smallframe
Also perfect when mounted with reed valve intake to the crankcase.
Made in Italy with the best materials and treatments, it weighs over 1.5kg
No need to bore the crankcases, the shoulders are 82mm and 86.5mm
It is recommended to use rollers cages wider than the original Piaggio ones.
WARNING:
THE CRANKSHAFT DOES NOT HAVE THE LATERAL LIP ON THE VALVE SHOULDER LIKE THE ORIGINAL CRANKSHAFTS
THEREFORE ON SOME CRANKCASES THE VALVE MAY NOT SEAL.
THE CRANKSHAFT CAN BE MOUNTED ON REED VALVE INTAKES TO THE CRANKCASE
Ideal for VMC 100 RVA
Flywheel for electronic ignition VMC cone 19 kg.1.4 complete with stator for Vespa 50 N/L/R-Special/125/Primavera/ET3/PK/S
Vespa 50 V5A1T N,L,R, Vespa 50 Special V5A2>3T, Vespa 50 Special V5B1>4T, Vespa 125 Primavera VMA1T>2T, Vespa 125 Primavera ET3 VMB1T
Racing Exhaust FURY S1 - for Vespa 125 Nuova VMA1T/125 Primavera VMA2T/ET3 VMB1T
Vespa 125 Primavera, Vespa 125 Primavera ET3
FURY S1 Handmade Racing Exhaust
This expansion is designed to be paired with the primary gears of 125cc Vespas, to exploit the engine's torque from the lowest revs with a pleasant sound.
It is ideal for long-stroke thermal groups such as: VMC Kappa 58, VMC CP-58, VMC GS and GSR 58 and 60mm, Kast GRV, Polini, Malossi, Pinasco, etc.
The exhaust manifold has a flange with slotted holes and fits stud centers of 52, 56, and 62 mm. The inlet diameter of the manifold to the cylinder is 32 mm. Calculated for phases around 120°/180°–185°, but also adaptable to wider ranges.
It does not fit on ET3 and Primavera frames with a side drawer. On PK frames, a part of the internal bulkhead supporting the spare wheel must be cut.
Mounting on cylinders with 52 mm stud centers may be difficult: it is recommended to use flanged nuts for a 10 mm key (code 003577).
After use, apply oil to
VMC drum hub for Zip/Et2/Et4 forks modification for Vespa 50 N/L/R-Special/125 Primavera ET3-PK S-XL-N-HP-FL (Disc brake fork modification)
Vespa 50 V5A1T N/L/R
Vespa 50 Special V5A2>3T
Vespa 50 Special V5B1>4T
Vespa 50 SS V5SS1>2T
Vespa 50 PK S/XL
Vespa 90 V9A1T
Vespa 90 SS V9SS1>2T
Vespa 125 Primavera VMA1>2T
Vespa 125 Primavera ET3 VMB1T
VMC Drum Hub for Zip/Et2/Et4 Forks Modified to Fit Vespa
This hub is used to fit Vespa wheels onto Piaggio Zip, ET2, ET4 scooter forks that are modified to fit Vespa frames.
It has been designed to keep the Vespa wheel perfectly centered with the Piaggio Zip, ET2, ET4 forks and similar.
For fastening to the fork hub, it is recommended to use low-profile Allen screws for a more streamlined look.
With wheels like the originals that have a 90° inflation valve, the valve might touch the brake caliper.
Apply strong thread locker on the studs for fastening the drum to the hub.
For fastening to the hub carrier/disc, we recommend using the low-profile Allen screw kits sold separately.
Handcrafted Racing Exhaust VMC STRADA - S3 for Vespa 50/90/125 New VMA1T/125 Primavera VMA2T/ET3 VMB1T
Vespa 125 Primavera, Vespa 125 Primavera ET3-PK
Handcrafted Racing Exhaust STRADA – S3 for Vespa Smallframe 125 ET3, Primavera, 50 Special
Stud hole spacing: 52 mm
Based on the well-tested VMC Evo, this exhaust retains its shape while introducing some slight modifications to the technical characteristics.
It is produced with slightly less refined finishes compared to the Evo, a choice that allows it to be offered at a lower price without compromising performance.
Compatible with ET3 frames equipped with a side compartment.
On PK frames, it is necessary to make a slight cut to the partition to allow the passage of the expansion curve.
On pre-1976 Primavera frames, the deeper side compartment may limit the exhaust installation.
Designed to offer maximum performance with 122/184 timing, it still adapts to a wider range of timings.
It pairs perfectly with long stroke 130 cc cylinders with a 32 mm exhaust diameter.
Ideal for thermal groups such as VMC GS 56/58, M1L 56/60, P
Gasket for exhaust 32 mm hole VMC TORK EVO KIFLY- Vespa 125 Primavera ET3-PK
Vespa 90 V9A1T
Vespa 125 Primavera VMA1>2T
Vespa 125 Primavera ET3 VMB1T
Vespa 125 PK /S/ XL
VMC wheel hub for Zip/ET2/ET4 fork - Vespa 50 N/L/R-Special/125 Primavera ET3-PK S-XL-N-HP-FL (Disc brake fork modification)
Vespa 50 V5A1T N/L/R
Vespa 50 Special V5A2>3T
Vespa 50 Special V5B1>4T
Vespa 50 SS V5SS1>2T
Vespa 50 PK S/XL
Vespa 90 V9A1T
Vespa 90 SS V9SS1>2T
Vespa 125 Primavera VMA1>2T
Vespa 125 Primavera ET3 VMB1T
Wheel hub disc holder and rim holder compatible with Piaggio ZIP forks, Vespa ET2 / ET4, modern Vespa and similar models.
This hub allows the installation of VMC adapter drums for traditional Vespa rims, or original Piaggio tubeless rims for ZIP scooters and Vespa ET2/ET4. Alternatively, it is also possible to mount SIP rims of 11 or 12 inches or equivalents.
It is compatible with floating and fixed brake discs of Ø 200 mm dedicated to Vespa PX Millennium models, Grimeca disc brake kit, LML Star, modern Vespa (LX, ET2, ET4, etc.) and Piaggio ZIP.
Supplied complete with bearings and oil seal.
VMC SILURO SPORT chrome exhaust for Vespa 125 Primavera-Primavera ET3
Vespa 125 Primavera VMA1T>2T
Vespa 125 Primavera ET3 VMB1T
VMC SILURO SPORT Exhaust for Vespa small frame
The exhaust has been designed and developed to be super performant while maintaining a classic and original look and sound.
It is entirely built from stamped steel sheets and assembled
by artisan welders with a decade of experience in making
2T exhausts.
The VMC SILURO "SPORT" version has a 32mm diameter exhaust flange and the
slotted mounting holes that adapt to cylinders with a stud
center distance of 52, 56, and 60mm.
It fits very well with performance cylinders such as the VMC GS series in
Cast Iron, the VMC ET6 and ET7 aluminum cylinders both 135cc and 144cc,
Pinasco Zuera, Quattrini M1 series (M1 56-60, M1-60B, M1L 56-60), the
EGIG 170cc cast iron cylinder, etc.
This exhaust enhances and unleashes the engine's power and torque
from low revs with an over-rev that can reach over 10
VMC Tool M22x1.5-M28x1 Flywheel Puller VMC and Piaggio Flywheel for Vespa Small and Large Frame
VMC Multifunction Extractor Tool
Professional multifunction tool, designed for quick and safe operations on Vespa Smallframe and Large Frame engines.
Main functions:
✅ VMC flywheel extractor with M22 x 1.5 thread
✅ Piaggio flywheel extractor with original threading
Made of high-strength steel
Product made in Italy
Electronic ignition VMC in CNC (cone 19 kg.1.5) with VMC 10 fan
Vespa 50 V5A1T N,L,R, Vespa 50 Special V5A2>3T, Vespa 50 Special V5B1>4T, Vespa 125 Primavera VMA1T>2T, Vespa 125 Primavera ET3 VMB1T
Flywheel machined from solid weighing approximately 1200g with the fan the total weight is 1500g
On the CNC flywheel, it is possible to screw on an additional weight of choice between 210g, 410g, 610g, 820g.
The VMC ignition is variable advance by 8° degrees complete with stabilizer and IDM coil
Cooling fan in aluminum with enlarged blade profile to increase air flow and better cool the thermal group even in the most demanding conditions
Fans available in different finishes and materials with more or fewer blades depending on the type of engine
The ignition delivers about 90 watts of power and requires the use of 12-volt lamps (this modification involves replacing the lamps in models that use 6v).
Ensures greater pickup, extension, and acceleration thanks to the ignition advance that varies by 8° degrees leaving a cooler cylinder at high revs
The ideal ignition for most engines both modified and original
The stator has an auxiliary cable for the possible recharging of a battery that can be managed through the supplied voltage regulator
Instructions are
VMC bracket for control unit, voltage regulator, and fuel pump for Vespa 125 VNA/VNB/ GTR 2°/TS 2°/150 VBA/VBB/GL/ Sprint V 2° /Super 2°/200 Rally 2°/PX80 -200/PE/Lusso/Cosa
VMC type integral electronic ignition flywheel (cone 19 kg.1.2)
Vespa 50 V5A1T N,L,R, Vespa 50 Special V5A2>3T, Vespa 50 Special V5B1>4T, Vespa 125 Primavera VMA1T>2T, Vespa 125 Primavera ET3 VMB1T
Flywheel mass with electronic ignition VMC for Vespa 50/125 N/L/R-Special-PK-Primavera-ET3
Vespa 50/125 N/L/R-Special-PK-Primavera-ET3
Flywheel Mass for VMC Ignition in CNC
The 820g weight does not fit on standard original Piaggio smallframe casings or aftermarket ones that have the dust seal lip
Flywheel for electronic ignition VMC integral version CNC (cone 20 kg.1.2)
Vespa 50 V5A1T N,L,R, Vespa 50 Special V5A2>3T, Vespa 50 Special V5B1>4T, Vespa 125 Primavera VMA1T>2T, Vespa 125 Primavera ET3 VMB1T
VMC TORK S expansion exhaust for Vespa 50/90/125 Primavera-ET3-PK
Vespa 50 Special-N-L-R (adaptable)
Vespa 50 PK (adaptable, removing spare wheel holder)
Vespa 125 Primavera/ET3
painting with high temperature clear gloss + 600
52/62 mm
Vespa 90 V9A1T
Vespa 125 Primavera VMA1>2T
Vespa 125 Primavera ET3 VMB1T
Vespa 125 PK /S/ XL
Internal diameter: 28mm
Center distance: 54mm
VMC brake pump kit for Vespa 50/90/125 Primavera/ET3/GT/GTR/Super/TS/150 Sprint/Sprint V/GL/Super/180SS/Rally
Vespa 50/90/125 Primavera/ET3/GT/GTR/Super/TS/150 Sprint/Sprint V/GL/Super/180SS/Rally
VMC Brake Pump Kit + Coordinated Clutch Lever for Vintage Vespa
The new solution by VMC is finally available to bring disc brakes to the original vintage Vespa handlebars, without aesthetic compromises or adapted solutions.
After last year's preview, a fully integrated and specifically designed system for Vespa is hitting the market: not an adaptation of motorcycle pumps with external linkages, screws, and brackets, but a kit designed for a direct, clean, and definitive installation.
The project, born from an idea by Massimo Santinello, effectively solves the ergonomic and aesthetic issues typical of disc conversions on vintage models.
✅ Patented design and total integration
The VMC pump body directly replaces the original lever support on the handlebar, maintaining a line consistent with the Vespa style.
No external linkage or homemade system
Elimination of mechanical play typical of traditional kits
Precise and direct actuation
Clean and perfectly integrated aesthetics
🚀 Braking efficiency and maximum compatibility<
VMC sports seat -fast replace- for Vespa 50/90/125 Special-Primavera-ET3
Vespa 50 V5A1T N,L,R Vespa 50 Special V5A2>3T Vespa 50 Special V5B1>4T Vespa 90 V9A1T Vespa 125 Primavera VMA1T>2T Vespa 125 Primavera ET3 VMB1T
black quilted / knurled side
edging: gray
with lock
without saddle strap, black
frame with interchangeable seats
VMC Cush Drive Kit for Vespa 50/90/125 Primavera ET3-PK/S/XL/N/HP/FL
Vespa 50 V5A1T N,L,R
Vespa 50 PK
Vespa 90 V9A1T
Vespa 125 Primavera VMA1>2T
Vespa 125 Primavera ET3 VMB1T
Vespa 125 PK
VMC 2.0 Cush Drive Overhaul Kit for Vespa Small Frame
Made of steel with surface hardening treatment
Includes springs with increased load with the same external dimensions as the original springs.
Ideal for overhauling the cush drives on original engines or with not too extreme modifications and to adapt to the power of modern Vespa engines.
APPLY STRONG THREAD LOCKER ON THE SCREWS
VMC bracket coil support and voltage regulator for Vespa PK50-125/S/XL/XL2
Vespa PK50-125/S/XL/XL2
VMC key locks clutch basket and pinion for Vespa 50/90/125/Primavera//ET3/PK50-125/S/XL/XL2
Vespa 50 V5A1T N,L,R
Vespa 90 V9A1T
Vespa 125 Primavera VMA1T>2T
Vespa 125 Primavera ET3 VMB1T
Vespa PK