Egig performance
EGIG Performance complete thermal group 170 cc for Vespa 50 Special V5B3T/90 V9A1T-125 Primavera ET3-PK
Vespa 125 Primavera VMA1>2T
Vespa 125 Primavera ET3 VMB1T
Vespa 125 ETS
Vespa 125 PK
Cylinder EGIG 170: gray cast iron kit designed for those who want a decisive upgrade on Vespa crankcases, maintaining a โplug & playโ assembly without milling work on the housing.
Technical features
Displacement 170 cc with stroke 51 mm and bore 65 mm
Connecting rod 115 mm
6 Transfers
Exhaust of 66 mm
Timings: 126/184โ (intake/exhaust) for sporty delivery and high performance
Piston ร65 with 2 rings for durability and sealing
Spark plug B9ECM
Recommended lubrication
Recommended mixture at 3% with Motul 800
Advance: 17ยฐ
Complete thermal group EGIG Performance 180 cc for Vespa 50 Special V5B3T/90 V9A1T-125 Primavera ET3-PK
Vespa 125 Primavera VMA1>2T
Vespa 125 Primavera ET3 VMB1T
Vespa 125 ETS
Vespa 125 PK
EGIG 180 Cylinder: grey cast iron kit designed for those who want a decisive upgrade on Vespa crankcases, maintaining a โplug & playโ assembly without milling work on the housing.
Technical Characteristics
Displacement 180 cc with a stroke of 54 mm and bore 65 mm
Connecting rod 116 mm
6 Transfer ports
Exhaust of 66 mm
Timings: 126/184โ (intake/exhaust) for sporty delivery and high performance
Piston ร65 with 2 piston rings for durability and sealing
Intake from the engine block: compatible with both rotary disc valve and reed valve intake (depending on engine configuration)
Potential power over 27 HP and 24 Nm without milling interventions (values achievable with suitable carburetor, exhaust, and ignition configuration)
Recommended lubrication
Recommended mixture at 3% with Motul 800
Engine shroud spacer EGIG Performance thermal group 170 cc Vespa 50 Special/N/L/R-90-125 Primavera ET3-PK 50/125 S/VL/HP/N
Vespa 50 Special/N/L/R-90-125 Primavera ET3-PK 50/125 S/VL/HP/N
Material: Steel
EGIG Performance cylinder head 170/180/187 cc Vespa 50 Special/N/L/R-90-125 Primavera ET3-PK 50/125 S/VL/HP/N
Vespa 50 Special/N/L/R-90-125 Primavera ET3-PK 50/125 S/VL/HP/N
Material: Fiberglass
Color: Black
EGIG Performance Hyper Flow fan cover and shroud thermal group 220 cc Vespa 50 Special/N/L/R-90-125 Primavera ET3-PK 50/125 S/VL/HP/N
Produced with a 3D machine, impeccable quality and finish.
Primary transmission gear set EGIG Performance straight teeth Z 50x21 (2.38) for Vespa 50 N/L/R-Special-90/125/โPrimavera/โET3/โPK50/125/โS/โXL/โN/HP-Ape 50
Vespa 50 V5A1T N,L,R
Vespa 50 PK
Vespa 90 V9A1T
Vespa 125 Primavera VMA1>2T
Vespa 125 Primavera ET3 VMB1T
Transmission ratio: Z50/21 = 2.38
S/R Version: Street / Road configuration, designed for high-performance street engines.
Reinforced teeth: the limited number of teeth allows for a wider and stronger tooth base, increasing the robustness of the transmission.
Primary sprocket: traditional fastening system, without polygonal attachment.
Recommended applications: ideal for high-performance engines such as EGIG220, Quattrini M200, and other Smallframe engines of equivalent power.
Gearbox configuration: particularly suitable in combination with close-ratio gearboxes, for example with a secondary shaft 17โ20.
On-road behavior: the first gear is pleasantly long, while the second to fourth gears have close ratios, promoting smooth and sporty progression.
EGIG Performance One Finger Clutch for Vespa 50-125/โPV/โET3/โPK50-125/โS/โXL/โXL2
Vespa 50 V5A1T N,L,R
Vespa 50 Special V5A2>3T
Vespa 50 Special V5B1>4T
Vespa 50 PK
Vespa 50 PK XL
Vespa 90 V9A1T
Vespa 125 Primavera VMA1>2T
Vespa 125 Primavera ET3 VMB1T
Vespa 125 PK
5 discs
basket
thickness 1.95mm
8 spring(s)
4 washers
thickness 1.60mm
with pressure plate on ball bearings
EGIG Performance PYTHON S racing exhaust for Vespa 125 Primavera-ET3
Vespa 125 Primavera VMA1>2T
Vespa 125 Primavera ET3 VMB1T
steel
unpainted
silencer: aluminum
lefthand
vent pin 54-62mm
manifold 32mm
phases 120-125 / 170-178
The S stands for SPORT and SILENCE (with the same performance as the PYTHON model without S)
EGIG Performance PYTHON racing exhaust for Vespa 125 Primavera-ET3
Vespa 125 Primavera VMA1>2T
Vespa 125 Primavera ET3 VMB1T
steel
unpainted
silencer: aluminum
lefthand
vent pin 54-62mm
manifold 32mm
for 100-140cc
Phases: 120/124 โ 178/182
EGIG Performance Superbanana Touring Racing Exhaust for Vespa 125 Primavera-ET3-PK
Vespa 125 Primavera VMA1>2T
Vespa 125 Primavera ET3 VMB1T
Vespa 125 PK
This "Super-banana" exhaust is capable of offering performance normally associated with hand-welded multi-segment expansion chamber exhausts. It provides only 5-10% less power than the most powerful of the much more expensive types. The width of the power band it produces also holds up well. In reality, this is a true high-performance exhaust disguised as a retro banana!
Discreet appearance.
Strong performance.
Manageable power delivery.
There is an integrated silencer in the exhaust body, reducing the noise created to an acceptable level, without negatively affecting operation or power delivery.
One-piece output
120-125 exhaust timing
170-180 output
27-29ยฐ pre-output
32mm manifold
Glove compartment compatible
Fits PK without frame modifications
Tires up to 3.50
Pin distance 54-62 mm
EGIG Performance Intake Manifold 170/180/187 for Vespa 50-125 PK/S/XL/N/HP/FL2
Vespa 50-125 PK/S/XL/N/HP/FL2
๐ Intake Manifold with Double-Cusped Reed Block (8 Petals)
Maximum responsiveness, increased torque, and optimized flow.
This intake system is designed to maximize the flow of fresh gases. The double-cusped reed block with 8 finned membranes (equipped with special plates for the 170cc configuration) ensures lightning-fast throttle response and a noticeable increase in torque from low revs.
The internal fluid dynamics have been studied to keep the duct as straight as possible: this straight-line design eliminates power losses and prevents annoying fuel stagnation or deposits inside the manifold.
๐ Technical Specifications and Dimensions
Reed Block: Double-cusped with 8 petals and special plates.
Internal Duct Diameter: 30 mm
Internal Sleeve Diameter (carburetor inlet): 35 mm
โ ๏ธ Installation Notes
Frame Compatibility: On some types of frames, it may be necessary to slightly countersink or widen the passage hole on the well to ensure perfect alignment and freedom of movement for the manifold.
EGIG Performance Intake Manifold 170/180/187 for Vespa 50/90/125 Primavera ET3
Vespa 50/90/125 Primavera ET3
๐ Intake Manifold with Double-Cusp Reed Pack (8 Petals)
Maximum responsiveness, increased torque, and optimized flow.
This intake system is designed to maximize the flow of fresh gases. The double-cusp reed pack with 8 finned membranes (equipped with special plates for the 170/180cc configuration) ensures a lightning-fast throttle response and a noticeable increase in torque right from low revs.
The internal fluid dynamics have been studied to keep the duct as straight as possible: this straight-line design reduces power losses to zero and prevents the annoying stagnation or deposit of fuel inside the manifold.
๐ Technical Specifications and Dimensions
Reed Pack: Double cusp with 8 petals and special plates.
Internal Duct Diameter: 30 mm
Internal Sleeve Diameter (carburetor inlet): 35 mm
โ ๏ธ Installation Notes
Frame Compatibility: On some types of frames, it may be necessary to slightly countersink or widen the passage hole on the well to ensure perfect alignment and freedom of movement for the manifold.
EGIG Performance Superbanana Sport Racing Exhaust for Vespa 125 Primavera-ET3
Vespa 125 Primavera VMA1>2T
Vespa 125 Primavera ET3 VMB1T
This "Super-banana" exhaust is capable of offering performance normally associated with hand-welded multi-segment expansion chamber exhausts. It provides only 5-10% less power than the most powerful of the much more
expensive types. The breadth of the power band it produces also holds up well. In reality, this is a true high-performance exhaust disguised as a retro banana!
Discreet appearance.
Strong performance.
Manageable power delivery.
There is a silencer integrated into the exhaust body, reducing the noise created to an acceptable level, without negatively affecting operation or power output.
For cylinders with modern layout
Single-piece or multiple outputs
126-128 exhaust timings
185-192 output
32mm manifold
Compatible with storage compartment
Tires up to 3.50
Pin distance 54-62 mm
Albero motore Egig Performance spalle piene 88 mm, cono 20, biella 116, corsa 54 per Vespa 50/90/125 Primavera-ET3-PK
Vespa 125 Primavera VMA1T>2T
Vespa 125 Primavera ET3 VMB1T
Vespa 125 PK S/XL/N/HP
ร Sede del paraolio lato volano: 20 mm
ร Sede del cuscinetto lato frizione: 20 mm
cuscinetti 6204 su entrambi i lati
paraolio lato frizione 27x47x6
paraolio lato Volano 20x32x7
EGIG Performance MAMBA racing exhaust for Vespa 125 Primavera-ET3
Vespa 125 Primavera VMA1>2T
Vespa 125 Primavera ET3 VMB1T
steel
unpainted
silencer: aluminum
exhaust manifold 54-60mm
for 100-144cc
EGIG Performance VIPER racing exhaust for Vespa 125 Primavera-ET3
Vespa 125 Primavera VMA1>2T
Vespa 125 Primavera ET3 VMB1T
steel
unpainted
silencer: aluminum
lefthand
vent pin 54-58mm
for 130-160cc
phases: 128-130 / 188-190
EGIG Performance COBRA EVO racing exhaust for Vespa 125 Primavera-ET3
Vespa 125 Primavera VMA1>2T
Vespa 125 Primavera ET3 VMB1T
steel
unpainted
muffler: aluminum
exhaust manifold 54-62mm
for 130-160cc
EGIG Performance VRA racing exhaust for M200 for Vespa 125 Primavera-ET3
Vespa 125 Primavera VMA1>2T
Vespa 125 Primavera ET3 VMB1T
Vespa 125 PK (with frame modification)
Hai visualizzato 18 di 18 prodotti