RDV Scootershop

Moped technologies

Filtri
there are 7 products
chiudi
there are 7 products
You are filtering for:
  • Moped technologies
Model
Request more info
I have read and accept the use of my data according to the disclosure of privacy. Read Privacy Policy.
accept
Fields with an * (asterisk) are required
thank you

Your request has been successfully forwarded to the staff, you will be contacted as soon as possible.

Modellino
Parti
    Modellino
    Parti
      Modellino
      Parti
        there are 7 products
        -10% LED conversion kit V2 Vespa 125 Primavera/ET3/GT/GTR/Rally/TS/Sprint Veloce/VNB/VBA/VBB/GS150/GS160
        Not available
        Compatibility

        Vespa 125 Primavera/ET3/GT/GTR/Rally/TS/Sprint Veloce/VNB/VBA/VBB/GS150/GS160

        technical specifications

        LED conversion kit for Vespa GTR, Rally, TS, and SV, including everything needed for the conversion to direct current of your electrical system, even with the original ignition.

        Specifically, the following components are provided: -12 V DC voltage regulator specific for Vespa use; -Plug and play front bulb holder with paired dual-filament bulb and position light; -Rear position light; -Brake indicator light bulb.

        The installation does not require any structural modifications to the headlights or bodywork, nor does it involve replacing the existing cables: the only interventions, if necessary, are on the light switch and the stop button and are completely reversible, so you can restore your Vespa to its original state in no time.
        In addition to the provided materials, a small-sized battery is needed, which will be charged when the engine is running and will actively power the entire electrical system. The supplied bulb holder, besides being perfectly compatible with the standard fittings, has been designed and manufactured to achieve the best possible lamp-reflector alignment: this allows maximizing performance, as the light beam projection is directed exclusively on a wide area of the ground with maximum
        homogeneity.

        Evening outings in the moonlight

        Approfondisci
        121,50 € 135,00 €
        99,59 € VAT excluded
        1 point RDV = 2 cents 121 points RDV = 2,42 € cashback
        -10% Vespa GL, GT, Sprint LED conversion kit
        Not available
        Not available
        06-CB-078-IR
        06-CB-078-IR

        Vespa GL, GT, Sprint LED conversion kit

        Compatibility

        Vespa GL, GT, Sprint v2

        technical specifications

        LED conversion kit for Vespa GL, GT, Sprint (trapezoidal headlight), composed of:

        12 V DC voltage regulator;
        rear position and stop LED bulb;
        dual-filament bulb (3000±50 actual lumens) with LED position, paired with a custom-made bulb holder.
        The product is perfectly compatible with both the original ignition and 12 V electronic ignition and must be mounted with a 12v 4.5 Ah battery (or higher capacity), which will be charged with the engine running using the supplied voltage regulator: this allows the use of lights and services even with the engine off, greatly increasing comfort.

        The bulb holder has been designed to offer the best possible performance on the original headlight without any physical modifications, perfectly optimizing the light beam projection areas: to mount it, simply place it in the original's position and connect it to the vehicle's electrical system.

        Approfondisci
        121,50 € 135,00 €
        99,59 € VAT excluded
        1 point RDV = 2 cents 121 points RDV = 2,42 € cashback
        -10% LED conversion kit for Vespa 50 Special, L, N, R
        Not available
        Compatibility

        Vespa 50 Special, L, N, R

        technical specifications

        LED conversion kit for Vespa 50 Special, L, N, R, consisting of:

        12v DC voltage regulator;
        LED position lights;
        LED high beam bulb.
        The product is perfectly compatible with both the original 6V point ignition and the 12V electronic ignition, and does not require structural modifications to the headlights.

        Installation is carried out using the original wiring, and requires fully reversible modifications, fully described in the instruction manual provided with the kit.

        Battery not required

        Approfondisci
        90,00 € 100,00 €
        73,77 € VAT excluded
        1 point RDV = 2 cents 90 points RDV = 1,80 € cashback
        LED conversion kit V1 Vespa Primavera/ ET3/ TS/ GT/ GTR/ Sprint v1/VBB/VNB
        low availability
        Compatibility

        Vespa Primavera/ ET3/ TS/ GT/ GTR/ Sprint v1/VBB/VNB

        technical specifications

        LED conversion kit for Vespa Primavera/ ET3/ TS/ GT/ GTR/ Sprint, including:

        12v DC voltage regulator;
        front dual-filament bulb;
        position and stop lights.
        The product is available in two variants: functioning without a battery*, or
        with a battery charged by the stator. The presence or
        absence of a battery before installing the kit is irrelevant: you will be able to
        charge it using the provided voltage regulator,
        regardless of the wiring and ignition available.

        The only necessary modifications are the standard ones to
        convert the electrical system to direct current: all
        relevant instructions will be provided with the product.

        Approfondisci
        89,00 €
        72,95 € VAT excluded
        1 point RDV = 2 cents 89 points RDV = 1,78 € cashback
        -7% LED conversion kit Vespa GTR-Sprint V2-TS-Rally
        Not available
        Compatibility

        GTR-Sprint V2-TS-Rally

        technical specifications

        LED conversion kit for Vespa GTR, Rally, TS, and SV, including everything necessary for converting your electrical system to direct current, even with the original ignition.

        In particular, the following components are provided: -12V DC voltage regulator specifically for Vespa use; -Plug and play front lamp holder with dual filament lamp and position light; -Rear position light; -Brake indicator lamp.

        The installation does not require any structural modifications to the headlights or bodywork, nor does it involve replacing the existing cables: the only interventions (if necessary) are on the light switch and stop button and are completely reversible, so you can restore your Vespa to its original state in the blink of an eye.
        In addition to the supplied materials, a small-sized battery is required, which will be charged with the engine running and will actively power the entire electrical system. The provided lamp holder, besides being perfectly compatible with the standard fittings, has been designed and manufactured to achieve the best possible lamp-reflector alignment: this allows for maximizing performance, as the light beam projection is directed exclusively over a wide area of the ground with maximum uniformity.

        Evening rides in the moonlight will be just a bad

        Approfondisci
        125,00 € 135,00 €
        102,46 € VAT excluded
        1 point RDV = 2 cents 125 points RDV = 2,50 € cashback
        LED conversion kit ⌀ 95 mm for Vespa 125/150 V1-15/V30-33T
        Available
        Compatibility

        Vespa 125 V1T>V15T
        Vespa 125 V30>33T

        technical specifications

        12 V dc voltage regulator;
        rear position and stop LED bulb;
        high efficiency dual-filament bulb with custom socket.
        Starting from the original system, it is now possible to provide safety and reliability to your Vespa: this is a solution developed to use the standard headlights* without modifying their attachment systems and keeping their appearance intact, so as not to violate the external originality of the vehicle. Nothing will be visible from the outside. Under the original body, however, a new heart will beat: by installing the product, you will have the opportunity to add a small battery and charge it while the engine is running, an essential condition for an electrical system worthy of the name.

        The installation is guided, and you can count on our assistance for any doubts!

        What to expect after assembly?

        1- unparalleled visibility (3000 real lm), thanks to meticulously conducted studies during the product development phase; 2- a finally reliable, modern, and expandable system: you can also connect digital instruments and gadgets of your choice; 3- a rapid increase in night trips on your Vespa: it's addictive!

        The product is compatible with both 6 V and 12 V

        Approfondisci
        Shipping time
        24/48 hours
        120,00 €
        98,36 € VAT excluded
        1 point RDV = 2 cents 120 points RDV = 2,40 € cashback
        -10% LED conversion kit with battery for Piaggio Ciao-SI-Bravo
        Available
        Compatibility

        Piaggio Ciao-SI-Bravo

        technical specifications

        LED conversion kit for Piaggio moped, consisting of: 12v DC voltage regulator; LED position lights; LED high beam bulb. The
        product is perfectly compatible with both point ignition and
        electronic ignition, and does not require structural modifications to the
        headlights. The installation is carried out using the original wiring,
        and involves completely reversible modifications, described in the
        instruction manual provided with the kit.

        The same kit,
        albeit in a less advanced series, was installed on “Lello”, the
        moped used by Henry Favre to undertake the journey “Italy in
        Ciao”, in 2016.

        Approfondisci
        Shipping time
        24/48 hours
        80,91 € 89,90 €
        66,32 € VAT excluded
        1 point RDV = 2 cents 80 points RDV = 1,60 € cashback

        Hai visualizzato 7 di 7 prodotti