MD Racing
M7 MD Racing nuts (4pcs) for VESPA stud bolts 50 - 90 - 125 PRIMAVERA - ET3 - PK 125 - PK 125 XL - PX 125/150 - PXE ARC. - GTR 125 - SUPER 150 - SPRINT VELOCE 150
Vespa 125
Vespa 150
Special solid nuts for Vespa cylinder prisoners.
They have a height of 10mm compared to the 7mm of commercial ones.
Classic 11mm hexagon made from solid and a 13.8mm ring underneath to rest on a larger surface.
4 pieces
Preloaded washers M7 MD Racing (4pcs) for VESPA 50 - 90 - 125 PRIMAVERA - ET3 - PK 125 - PK 125 XL - PX 125/150 - PXE ARC. - GTR 125 - SUPER 150 - SPRINT VELOCE 150 studs
Vespa 50
Vespa 125
Vespa 150
Special harmonic steel washer kit with preload
specifications to compensate the play of thermal excursions of Vespa cylinder studs.
These washers are completely compressed at 1.3kgm (tightening of Vespa studs)
and compensate for the loosening of studs subjected to heating.
Dimensions:
inner diameter 7.5mm
outer diameter 16.8
thickness 1.8mm
washer height at rest 2.18mm
excursion approximately 0.38mm
MD Racing sprocket fixing nut M12x1.5 mm for Vespa 50/90/125 Special-N-L-R-Primavera-PK
Vespa 50
Vespa 90
Vespa 125 Primavera ET3
Vespa PK
Vespa PK FL2
All Models / Tutti i modelli
Engine oil cap “Old Style” perfectly similar to the original Piaggio with the word “OLIO” on the top of the hexagon,
suitable for all Vespa or Ape engines with M8 oil drain threading.
The special neodymium magnet embedded with high magnetic power,
attracts all the micro ferrous material produced by the gears, extending the life of the bearings.
Essential especially in modified engines where the gears are heavily stressed.
Units in the box: 1
Only one screw and one fiber washer are provided.
The top cap for oil filling does not need to be magnetized.
MD Racing oil cap with magnet machined from solid for Vespa 50/125/150/200 Special-Primavera-PX-GT-VBB-GL-Rally
All models / Tutti i modelli
Engine oil cap “RACING STYLE” compatible with the original Piaggio,
suitable for all Vespa or Ape engines with M8 oil drain thread.
The special neodymium magnet embedded with high magnetic power attracts all the micro ferrous material produced by the gear system, extending the life of the bearings.
Indispensable especially in tuned engines where the gears are heavily stressed.
Cylinder head support washer MD Racing (Studs M7) for VESPA 50 - 90 - 125 PRIMAVERA - ET3 - PK 125 - PK 125 XL - PX 125/150 - PXE ARC. - GTR 125 - SUPER 150 - SPRINT VELOCE 150
VESPA 50 - 90 - 125 PRIMAVERA - ET3 - PK 125 - PK 125 XL - PX 125/150 - PXE ARC. - GTR 125 - SUPER 150 - SPRINT VELOCE 150
MD RACING starter bump for Vespa 50 R 2°/S 2°/Special V5B3T 2°/SR 2°/90 2°/100/125 PV 2°/ET3 2°/PK50/S/SS/XL/2/FL/HP/Rush/PK80-125 S/PK125/ETS/N/XL/XL2
Vespa 50 V5A1T 893030>
Vespa 50 Special V5B3T 88658>
Vespa 90 V9A1T 141513>
Vespa 125 Primavera VMA2T 0148637>
Vespa 125 Primavera ET3 VMB1T 8091>
Vespa PK
Special bump rubber for Vespa 50, 90, 125 ET3 Primavera, PK starting sector
made of rubber resistant to both Synthetic and Mineral oils.
Measures 23×21.7x7mm optimized to properly fit the starter blade.
It is guaranteed not to dry out or break even under the heaviest stress.
The bump rubbers are designed to be compatible with the new
Modern crankcases available on the market for small frame Vespa.
Engine block fusion silent block buffer MD Racing internal hole 9mm - soft model - for Vespa 50/90/125/150/160/180/200
Vespa 50/90/125 Primavera ET3
Vespa 50/125 PK
Vespa 125 VN1T 06001>
Vespa 125 VN2T
Vespa 125 VNA1>2T
Vespa 125 VNB1>6T
Vespa 125 Super VNC1T
Vespa 125 GT VNL2T
Vespa 125 GTR VNL2T
Vespa 125 TS VNL3T
Vespa 150 VL1>3T
Vespa 150 VB1T
Vespa 150 GS VS1>5T
Vespa 150 VBA1T
Vespa 150 VBB1>2T
Vespa 150 Super VBC1T
Vespa 150 GL VLA1T
Vespa 150 Sprint VLB1T
Vespa 150 Sprint Veloce VLB1T
Vespa 180 Rally VSD1T
Vespa
Graduated disc d.170 mm MD Racing advance and phase control for Vespa 50/90/125/150/180/200
All Models / Tutti i modelli
Silent-block traversa motore MD Racing neri (soft) Alluminio/poliuretano per carter motore originali Piaggio Vespa V50, V90, SS50, SS90, PV125, ET3, PK S, PK XL
Vespa 50 V5A1T 92877>
Vespa 50 Special V5A2>3T
Vespa 50 Special V5B1T>3T
Vespa 50 PK
Vespa 90 V9A1T 25001>
Vespa 90 SS V9SS2T
Vespa 125 Primavera VMA1T>2T
Vespa 125 Primavera ET3 VMB1T
Vespa 125 PK
Speciale Kit silent block ANTERIORE per vespa small (vespa 50 ,special , ET3,PK, HP) realizzato interamente in ERGAL ricavato dal pieno e poliuretano di altissima qualità, con densità calcolata per il massimo confort.
La specifica filettatura al centro dei perni con invito facilitato, risolve il problema di montaggio.
E’ sufficiente una volta inseriti i perni destro e sinistro, avvitare le due estremità mediante due chiavi a brugola da 10mm inserendole nell’apposita cava in testa al perno e serrare fino a battuta.
In questo modo si è sicuri che la lunghezza perno sia corretta e soprattutto definita.
Vengono fornite assieme al kit 02 rasamenti da 1mm per creare la battuta interna ai gommini.
Pair of MD Racing Sport silent blocks for Vespa PX200/Rally 200 (VSE1T) (2nd series)
Vespa 125 PX T5 VNX5T
Vespa PX rainbow series
Vespa 200 Rally 0040654 >
Vespa 200 PE VSX1T
Special kit silent block engine Vespa PE 200 / or Vespa T5
made of solid ergal and high-quality rubber with hardness calculated for maximum engine stability, especially in curves and extreme lean angles.
Once the right and left pins are inserted, simply screw the two ends using 14mm Allen keys, inserting them into the special slot at the head of the pin and tighten until fully seated.
This ensures that the length of the pin is correct and, above all, defined.
Included with the kit are 02 spacers of 2.5mm and assembly instructions.
MD Racing gear selector for Vespa 50 N/L/R-Special-90 V9A1T-125 Primavera ET3
Vespa 50 V5A1T N,L,R
Vespa 50 Special V5A2>3T
Vespa 50 Special V5B1>4T
Vespa 90 V9A1T
Vespa 125 Primavera ET3 VMB1T
Vespa 125 Primavera VMA1T>2T
Silent-block engine crossbar MD Racing in black (Soft) for Quattrini C1, C2 engine casing - Vespa V50, V90, SS50, SS90, PV125, ET3, PK S, PK XL
Vespa 50 V5A1T 92877>
Vespa 50 Special V5A2>3T
Vespa 50 Special V5B1T>3T
Vespa 50 PK
Vespa 90 V9A1T 25001>
Vespa 90 SS V9SS2T
Vespa 125 Primavera VMA1T>2T
Vespa 125 Primavera ET3 VMB1T
Vespa 125 PK
Starting buffer MD Racing for Vespa 125 VNA-TS/150 VBA-Super/160 GS/180 SS/Rally/PX80-200/PE/Lusso/T5/Cosa
Vespa 125 (excluding Primavera ET3)
Vespa 150
Vespa 160
Vespa 180
Vespa 200
Shock absorber fixing screws MD Racing M9x71 mm, 14mm head for Vespa 50-125/Primavera/ET3/25 VNA/VNB/GT/GTR/TS/150 VBA-Super/160 GS/180 SS/Rally/PX125/150/200E
Vespa 50
Vespa 90
Vespa 125
Vespa 150
Vespa 160
Vespa 180
Vespa 200
Size: M9x 65 mm
Included: Grower and low nut
MD Racing Soft silent block pair for Vespa PX200/Rally 200 (VSE1T) (2nd series)
Vespa 125 PX T5 VNX5T
Vespa PX rainbow series
Vespa 200 Rally 0040654 >
Vespa 200 PE VSX1T
Special Kit silent block engine for Vespa PE 200 / or Vespa T5,
made of solid ergal and high-quality rubber with hardness calculated for maximum driving comfort.
Once the right and left pins are inserted, simply screw the two ends using 14mm Allen keys, inserting them into the special slot at the head of the pin and tighten until flush.
This way you can be sure that the pin length is correct and, above all, defined.
Follow the attached assembly instructions.
Engine block fusion silent block MD Racing internal hole 9mm - red model - for Vespa 50/90/125/150/160/180/200
Vespa 50/90/125 Primavera ET3
Vespa 50/125 PK
Vespa 125 VN1T 06001>
Vespa 125 VN2T
Vespa 125 VNA1>2T
Vespa 125 VNB1>6T
Vespa 125 Super VNC1T
Vespa 125 GT VNL2T
Vespa 125 GTR VNL2T
Vespa 125 TS VNL3T
Vespa 150 VL1>3T
Vespa 150 VB1T
Vespa 150 GS VS1>5T
Vespa 150 VBA1T
Vespa 150 VBB1>2T
Vespa 150 Super VBC1T
Vespa 150 GL VLA1T
Vespa 150 Sprint VLB1T
Vespa 150 Sprint Veloce VLB1T
Vespa 180 Rally VSD1T
Vespa
Pair of gear selector shoes for Vespa 50-125/PV/ET3/PK50-125/S/XL/XL2
Vespa 50-125/Primavera/ET3
Vespa 50-125 PK/S/XL/XL2
High-quality forged product, including safety ring
Silent-block engine crossbar MD Racing black (soft) stainless steel/polyurethane, for original Piaggio engine casings for Vespa 125/150 TS-GT-GTR-VNA-VNB-VBB-VBA-GL-PX
Vespa 125 VNA1>2T
Vespa 125 VNB1>6T
Vespa 125 GT VNL2T
Vespa 125 GTR VNL2T
Vespa 125 TS VNL3T
Vespa 125 Super
Vespa 150 VBA1T
Vespa 150 VBB1>2T
Vespa 150 Super VBC1T
Vespa 150 GL VLA1T
Vespa 150 Sprint VLB1T
Vespa 150 Sprint Veloce VLB1T
Vespa 125 PX First series
Vespa 150 PX First series
Reinforced silent blocks for greater driving stability, mount dry (at most with the help of talcum powder).
WARNING-->Directional silent blocks, must be mounted according to the direction of travel
in the following way: Left travel direction: red mark,
right travel direction: green mark.
Perforated bowl kit MD Racing (7 pieces) in c40 for Vespa 200 Rally-PE-Cosa
Vespa 200 Rally-PE-Cosa
Compared to commercially printed glasses, the MD racing glass has a constant thickness of 1mm across the entire profile.
This solution minimizes the risk of the bottom breaking under the strong pressure of the spring, which would cause the spring to come out with obvious damage to the engine.
MD Racing perforated cup kit (6 pieces) in c40 for Vespa 125/150 VNB-GT-GTR-TS-PX-VBB-GL-Sprint-Sprint Veloce
Vespa 125 VNB/GT/GTR/TS/PX
Vespa 150 VBB/GL/Sprint/Sprint Veloce/PX
Compared to commercially printed glasses, the MD racing glass features a consistent thickness of 1mm throughout the profile.
This solution minimizes the risk of the base breaking
under the vigorous push of the spring, which would cause it to come out
with obvious damage to the engine.
Proma enlarged exhaust manifold MD RACING 32mm for Vespa 125 Nuova VMA1T/125 Primavera VMA2T/ET3 VMB1T
Vespa 125 Primavera, Vespa 125 Primavera ET3
Enlarged 32mm collector specific for mounting on PROMA exhaust.
N.B. 32mm actual internal from the exhaust flange then increasing up to the socket!!
Technical features:
Socket made on a lathe from solid material with double attachment ring (see photo) to ensure absolute precision of insertion and better gas sealing compared to the original.
Exhaust flange with a 32mm internal hole perfectly matched, laser cut in 6mm thickness, stable and rectified after welding to have a flat surface with maximum sealing.
Given the generous diameter of the collector and the tight curvature radius, the remaining space for fixing the internal screw of the exhaust flange is very limited.
MD racing provides a stud with an internal hex key to be tightened correctly and a special nut with an 11mm hex instead of 13.
Ensure before assembly that the stud, once inserted into the cylinder and tightened, does not hit the internal curve of the collector, otherwise shorten it using an angle grinder.
Hai visualizzato 22 di 22 prodotti