Pinasco
Complete shock absorber for Vespa 125 VN1T 6001>/VN2T-VL1>3T-GS150 VS1>5T
Vespa 125 VM1>2T
Vespa 125 VN1T
Vespa 125 VN2T
Vespa 150 VL1>3T
Vespa 150 VB1T
Vespa 150 GS VS1>4T
Vespa 150 GS VS5T Export models
Adaptable Vespa 150 GS VS5T
Double-acting oleo-pneumatic shock absorber with spring preload adjusted by a micrometric aluminum ring, calibrated harmonic steel spring. Black body, black spring.
Engine crankcase master 43X43 with 12mm pin shaft for Piaggio Ciao-Si-Bravo
Hello-YES-Bravo
The Carter Motor Pinasco Power Casing for Piaggio Moped has been designed to accommodate a crankshaft with the valve side shoulder 5mm wider than the original, with 43mm and 46mm stroke, rotary valve intake with interchangeable manifolds of 13mm (supplied), 21mm (optional), and additional CNC machined transfer ports. The kit is available in 2 distinct versions, Valve and Reed for thermal groups with a bore of 43mm and 46mm and comes with the dedicated crankshaft and all mounting accessories.
Pinasco airbox purifier cover with MIX for Vespa Vespa 180-200 Rally/P80 -150X/P200E/PX80-200E/Lusso /`98/MY/`11/T5
Vespa 150 PX VLX1T
Vespa 200 Rally VSE1T Vespa P 200 E VSX1T
Vespa PX 200 E VSX1T
Vespa PX 200 E Rainbow VSX1T
Vespa PX 200 E Rainbow Elestart VSX1T
Vespa 200 PE VSX1T Millennium '98
In plastic, 20% more volume, suitable for models WITH mixer
Complete thermal group Pinasco (177 cc) in cast iron with two transfer ports for Vespa 125 VNB1>6T, Vespa 125 GT VNL1>2T, Vespa 125 GTR VNL2T, Vespa 150 VBB1>2T, Vespa 150 GL VLA1T, Vespa 150 Sprint VLB1T
Vespa 125 VNB1>6T, Vespa 125 GT VNL1>2T, Vespa 125 GTR VNL2T, Vespa 150 VBB1>2T, Vespa 150 GL VLA1T, Vespa 150 Sprint VLB1T
Brand: Pinasco
Bore: 63
Displacement: 177 cc
Piston for Pinasco thermal group (80 cc) in cast iron for Vespa 50 N-L-R-Special-PK-XL-N-HP-FL-Ape 50
Vespa 50 V5A1T N,L,R, Vespa 50 Special V5A2>3T, Vespa 50 Special V5B1>4T, Vespa 50 PK, Ape 50
Stroke: 43
Displacement: 80 cc
Complete thermal group Pinasco (80 cc) in cast iron for Vespa 50 N-L-R-Special-PK-XL-N-HP-FL-Ape 50
Vespa 50 V5A1T N,L,R, Vespa 50 Special V5A2>3T, Vespa 50 Special V5B1>4T, Vespa 50 PK, Ape 50
Stroke: 43
Displacement: 80 cc
PINASCO ignition module conversion from points to electronic for Piaggio Ciao-SI-Bravo
Models with contact point ignition
For conversion to electronic ignition
Pinasco has created a control unit that converts engines with contact point ignition into engines with electronic ignition without needing to replace the original components. By eliminating the capacitor and connecting the control unit in parallel with the original high-tension coil, it is possible to carry out the conversion without invasive modifications to the engine or the electrical system; the contact points are not removed, they become the pick-up signal.
Piston d.63 A 63.4 for complete thermal group Pinasco (177 cc) in cast iron since 2015 for Vespa 125 VBA/VBB/VNB-150 VBA/PX
Vespa 125 VNB1>6T, Vespa 125 GT VNL1>2T, Vespa 125 GTR VNL2T, Vespa 150 VBB1>2T, Vespa 150 GL VLA1T, Vespa 150 Sprint VLB1T, Vespa PX
Complete thermal group with two ports in lamellar cast iron Pinasco (177cc) with side spark plug for Vespa 125/150 VNA-VNB-GT-VBB-VBA-GL-Sprint
Vespa 125 VNA1>2T (requires crankshaft stroke 57)
Vespa 125 VNB1>6
Vespa 125 GT VNL1>2T
Vespa 125 GTR VNL2T
Vespa 150 VBA1T
Vespa 150 VBB1>2T
Vespa 150 GL VLA1T
Vespa 150 Sprint VLB1T
Material: Cast Iron
Bore: Ø63mm
Stroke: 57mm (check your vehicle's stroke before purchasing)
Displacement: 177cc
Head: Side Hole
Squish: 1.5-1.7mm
Piston: Stamped Aluminum with steel dual rings
Spark Plug: NGK BR8HS
Timing: 19° 2500rpm (Original) 24° 2500rpm (Flytech)
Pinasco bearing kit (spoked) for crankshaft 6202 TN9-C4 (15x35x11 C4)
Piaggio Ciao, Yes, Bravo
Designed for high-performance engines, the pair of Pinasco T9-C4 bearings is the top of the range currently available on the market. Made with the best materials, they feature an anti-friction polyamide cage and C4 ball tolerance to ensure perfect axial play of the crankshaft. The Moped accessory that was missing from the already complete Pinasco product range.
Master engine crankcase 46X46 with 12mm pin shaft for Piaggio Ciao-Si-Bravo
Hello-YES-Bravo
The Pinasco Power Casing Engine Case for Piaggio Moped has been designed to accommodate a crankshaft with a valve side shoulder 5mm wider than the original, with 43mm and 46mm stroke, rotary valve intake with interchangeable manifolds of 13mm (provided), 21mm (optional), and additional CNC machined transfers. The kit is available in 2 distinct versions, Valve and Reed for thermal groups with a bore of 43mm and 46mm and comes with the dedicated crankshaft and all mounting accessories.
Pinasco Engine Crankcase Vespa Faro Basso 4 Studs With 57mm Crankshaft for Vespa 125 VM/VN/ACMA/150 VB/VGL1/VL/GS
Vespa 125 VM/VN/ACMA/150 VB/VGL1/VL/GS
Carter with 4 Studs for mounting PX thermal groups with 57mm stroke, die-casting technology, steel sliding track inserts, engine case closure via studs, new gearbox shaft bearings, crankshaft increased by +7mm in width compared to the original.
Primary couple with extended Pinasco ratio (Z 23/65) for Vespa 200 PX-Rally-Cosa
Vespa 200 Rally VSE1T
Vespa P 200 E VSX1T
Vespa PX 200 E VSX1T
Vespa PX 200 E Rainbow VSX1T
Vespa PX 200 E Rainbow Elestart VSX1T
Vespa 200 PE VSX1T Millennium '98
Complete set of shock absorbers
Primary gears Pinasco with short ratio (11.9:1) for Piaggio Ciao-Si-Bravo with variator
Yes-Hello-Good with variator
After producing the Gear Box Variator for Piaggio mopeds, Pinasco has developed a series of high-strength steel gear kits with various ratios for all "Ciao" enthusiasts who use them in Enduro, Track, or Touring.
Made from alloy steel specifically for gears, the new SPRINT GEARS Pinasco are extremely durable and quiet, the main gear has a helical profile to eliminate the axial oscillation of the clutch shaft (a component of the forces at play "pulls" the shaft inward) always ensuring the correct alignment of the half-pulleys even in the most demanding use.
The SPRINT GEARS Pinasco gears, complete with washers, can also be mounted in all original Piaggio variator wheel hubs.
Complete crankshaft Advanced cone ⌀17 PINASCO for Vespa 125 VNB/GT/GTR 1°/Super/TS/150 VBA/VBB/T4/GL/Sprint/V 1°/Super 1°
Vespa 125 GT VNLT
Vespa 125 GTR VNL2T
Vespa 125 TS VNL3T
Vespa 150 Sprint VLB1T
Vespa 150 Sprint Veloce VLB1T
Stroke: 57 mm
Maximum performance even on completely Original engines, intake shoulder advanced and mirror polished optimizing fluid dynamics.
Pinasco airbox purifier cover for Vespa 125 VNB-TS/150 VBA -Super/Rally/P80-150X/P200E /PX80-200E/Lusso/T5
Vespa 125 VNB-TS/150 VBA-Super/Rally/P80-150X/P200E/PX80-200E/Lusso/T5
In plastic, 20% more volume, suitable for models WITHOUT mixer
Pinasco Anticipated Crankshaft (20 mm cone and 45 mm stroke)
Vespa 50 PK XL V5X3T
Vespa 50 PK N
Vespa 50 PK HP
Cone 20 mm
Made of forged steel, CNC machined. The shaft is made with numerous heat treatments that ensure maximum quality and reliability. The connecting rod is made by forging, designed to withstand any type of stress.
Clutch cover spacer Pinasco low headlight for Vespa 125/150 VM/VN/VL/VB1T
Vespa 125/150 VM/VN/VL/VB1T
Complete thermal group with two cast iron transfers Pinasco (177cc) with central spark plug for Vespa 125/150 VNB-GT-VBB-VBA-GL-Sprint
Vespa 125 VNB1>6T
Vespa 125 GT VNL1>2T
Vespa 125 GTR VNL2T
Vespa 150 VBA1T
Vespa 150 VBB1>2T
Vespa 150 GL VLA1T
Vespa 150 Sprint VLB1T
Bore: 63 mm
Displacement: 177cc
Central spark plug
Stroke: 57 mm
Dell'Orto PHBL 24 carburetor with Pinasco Aluminum manifold for Vespa 50/90/125 Primavera ET3
Vespa 50/90/125 Primavera ET3
High-performance synthetic lubricant specifically for 2-stroke engines, keeps rings and pistons clean thanks to optimal combustion.
1 Lt package
Pinasco Tubeless polished aluminum full wheel rim (3.50/8) for Vespa 98/125 V1-15/V30-33/VU /VM/VN/VNA/Hoffmann/VNB/ACMA /150 VL/VB/VBA/VBB
Vespa 125 V31>33T
Vespa 125 VM1>2T
Vespa 125 VN1>2T
Vespa 125 VNA1>2T
Vespa 125 VNB1>6T
Vespa 150 VL1>3T
Vespa 150 VB1T
Vespa 150 VBA1T
Vespa 150 VBB1>2T
Includes nuts and washers
Pinasco high-speed crankshaft bearing (oversized +0.04mm) for Vespa 125/150 VM-VN-VNA-GT-GL-TS-VL-VBA-VBB-VB1-Sprint-PX
Vespa 125 from 1953
Vespa 150 from 1954
Vespa 160
Vespa 180
Vespa PX
Vespa PE
Dimensions: 25x62x12 mm
Pinasco SI 20/20 Carburetor (specific tuning 2 transfers) for Vespa 125/150 Sprint V-PX-TS
Vespa 125/150 Sprint V-PX-TS
Specific for Vespa 2 transfers with Pinasco 177 thermal group without mixer
calibration 48-160 jets 160-be3-96
Vespa 125 VM1T
Vespa 125 VM2T
Vespa 125 VN1T
Vespa 125 VNA1T
Vespa 125 VN2T
Vespa 150 VL1T
Vespa 150 VL2T
Vespa 150 VL3T
Vespa 150 VB1T
Vespa 150 VBA1T
Clutch slider for Vespa 125/150 VNB-GT-GTR-TS-PX-VBB-GL-Sprint-Sprint Veloce
Vespa 125 (Excluding primavera ET3)
Vespa 150
Vespa 160
Vespa 180
Vespa 200
All Models
Mounting in place of the bearing on soft support
Vespa 125 (all except Primavera ET3)
Vespa 150
Vespa 160
Vespa 180
Vespa 200
Tightening with 14 mm wrench
Primary transmission gear pair z17 on bell z68 for Vespa 50 Special
Vespa 50 Special V5B3T
Main feature: Extends the gear ratio without the need to disassemble the clutch bell, increasing speed by 10 km/h
Vespa 125 VNB/GT/GTR/TS/PX
Vespa 150 VBB/GL/Sprint/Sprint Veloce/PX
Vespa 200 PX/Rally/Cosa
Kit Consists of: Reinforced springs and perforated cups.
Helical gear clutch group Z 23 (6 springs) on primary Z67/68 for Vespa 125/150 VNB-GT-GTR-TS- VBB-GL-Sprint -PX
Vespa 125 VNB/GT/GTR/TS/VBB/GL/Sprint/Sprint Veloce (required 07-DH-105-DR)
Vespa 125/150 PX
Diameter: 97 mm
height: 34 mm
Thermal Group "QUADRO" 80cc Pin 12 for Piaggio Ciao/SI/Bravo
with flanged exhaust, 22MM manifold.
Single ring
The Pinasco "EVOTEN BIG BORE QUADRO" thermal group Ø 46mmx46mm is a new product dedicated to the world of Piaggio mopeds with a 46mm stroke crankshaft and is the specific thermal group for the Pinasco 46x46 Master and Slave crankcases.
The displacement is close to 80cc, it is equipped with a single ring piston and mounts flanged exhaust manifolds of 22, 25, and 28mm.
The Pinasco "EVOTEN BIG BORE QUADRO" thermal group is supplied with the new unified central spark plug head with 5 recessed studs and complete with a decompression valve that permanently eliminates the problem of combustion chamber leaks and the consequent performance drops; the compression ratio is 13.5:1.
Vespa 125 VM1T>VM2T
Vespa 125 VN1T>2T
Vespa 150 VL1T>VL3T
Vespa 150 VB1T
Stroke: 57 mm connecting rod 110
Attention--> Compatible with thermal groups in stroke 57.
Piaggio Ciao, Piaggio Yes
Advanced version
The Pinasco crankshaft, made of case-hardened steel, chrome-plated, advanced and polished on the intake side, ensures high performance in any driving condition
Pinasco Super Sport multiple gear with extra short 4th gear/short 3rd gear Z 12/13/16/19 for Vespa 200 Rally/P125-150X 2nd/P150S 2nd/P200E/PX125-200 E/Lusso /`98/MY/`11/T5/Cosa
Vespa 200 Rally/P125-150X 2°/P150S 2°/P200E/PX125-200 E/Lusso /`98/MY/`11/T5/Cosa
PINASCO unit conversion from points to electronic for Vespa 50 N/L/R-Special-125 Primavera/Sprint-Super-GT/GTR/TS/Rally/SS/LML
Models with points ignition
For conversion to electronic ignition
Pinasco has developed a control unit that converts engines with point ignition into engines with electronic ignition without having to replace the original components. By removing the capacitor and connecting the control unit in parallel with the original high voltage coil, it is possible to perform the conversion without invasive modifications to the engine or the electrical system; the points are not removed, they become the pick-up signal.
Vespa 125/150/200
For SI 20-24 carburetors
This cover is modified by enlarging the fuel passages, thus reducing the annoying emptying of the bowl (which normally occurs with 177cc and 225cc modifications), reducing the risk of seizing.
Cluster Gear Pinasco 4-Speed Super Sport (Z 10-14-17-20) for Vespa 50-90-125 Primavera/ET3/PK-Ape 50
Vespa 50 S V5SA1T 15325>22444
Vespa 50 Special V5B3T
Vespa 50 Elestart V5B4T
Vespa 50 Sprinter V5SS1T> V5SS2T
Vespa 50 PK V5X1T
Vespa 50 PK S V5X2T
Vespa 50 PK S Elestart V5X2T
Vespa 50 PK XLS V5S2T
Vespa 50 PK XL V5X3T
Vespa 50 PK XL Elestart V5X3T
Vespa 50 PK XL2/ Elestart V5X3T
Vespa 50 RUSH V5X4T
Vespa 50 PK FL V5N1T
Vespa 50 PK HP V5N2T
Vespa 50 PK N V5X5T
Vespa 50 Revival V5R1T
Vespa PK 80
Cluster with 3rd short 4th very short
Cluster Gear Pinasco 4-Speed Transmission Shaft Gran Turismo (Z 10-14-18-20) for Vespa 50-90-125 Primavera/ET3/PK-Ape 50
Vespa 50 S V5SA1T 15325>22444
Vespa 50 Special V5B3T
Vespa 50 Elestart V5B4T
Vespa 50 SprinterV5SS1T> V5SS2T
Vespa 50 PK V5X1T
Vespa 50 PK S V5X2T
Vespa 50 PK S Elestart V5X2T
Vespa 50 PK XLS V5S2T
Vespa 50 PK XL V5X3T
Vespa 50 PK XL Elestart V5X3T
Vespa 50 PK XL2/ Elestart V5X3T
Vespa 50 RUSH V5X4T
Vespa 50 PK FL V5N1T
Vespa 50 PK HP V5N2T
Vespa 50 PK N V5X5T
Vespa 50 Revival V5R1T
Vespa PK 80
Cluster with close 4th gear
Thermal group kit, crankshaft, exhaust (206cc) in aluminum for Vespa PX-TS-GTR
Vespa 125 PX VNX1>2T
Vespa 125 PX ZAPM 74100
Vespa 125 TS VNL3T
Vespa 125 GTR VNL2T
The cylinder, without a liner, is made of Nikasil aluminum, 7 transfers, 66mm bore, 2-segment piston of 1mm, concentric recessed head with 8 fixing studs (4 standard + 4 additional).
The crankshaft is a generous dedicated Pinasco, 60mm stroke and 127mm connecting rod, specifically designed for the kit and capable of absorbing stresses optimally, providing your Vespa with unparalleled reliability and driving comfort. Needle bearing included!
The exhaust is the highly tested Pinasco Touring, already used in the 251cc kit, perfectly matching the exhaust of the thermal group, recalculated and large-sized.
High-speed crankshaft bearing kit Pinasco for Vespa 125/150 VM-VN-VNA-VNB-GT-GL-TS-VL-VBA-VBB-VB1-Sprint-PX
Vespa 125 from 1953
Vespa 150 from 1954
Vespa 160
Vespa PX
Vespa PE
Measurements: 25x62x12 mm 2 pieces