DEXTER Racing
Dexter Modern Box 4.0 Muffler (28 mm exhaust) for Vespa PK80-125 S/PK100-125XL/PK125/ETS/N/XL2
Vespa 50 PKS/XL/HP/FL2- PK80-125 S/PK100-125XL/PK125/ETS/N/XL2
Modified PK / HP Padellino – Dexter Racing x WhiteOne Racing
The Modern Box 28 is born from the collaboration between Dexter Racing and WhiteOne Racing, with the aim of offering a high-performance semi-expansion with an almost original look, ideal for Vespa PK and HP.
Designed to ensure a perfect balance between performance, low noise, and discreet aesthetics, it represents the ideal solution for those who want to improve power delivery without sacrificing a sober design.
✅ Technical Features
-Available with an internal diameter collector of 28 mm or 32 mm
-Lower noise than a Proma
-Original-like aesthetics (modern padellino style)
-Excellent torque to make the most of the 4th gear
-Plug & play installation on Vespa PK and HP stroke 43 and 51
-Compatible with tires 3.00 R10 and 90/90 R10
-Slightly shorter collector compared to the Classic Box to avoid interference with the partition (further shorten-able if necessary
Dexter 4.0 frying pan exhaust (28 mm outlet) for Vespa 50 N/L/R-Special/ 90-125 Primavera ET3
Vespa 50 Special V5B3T
Adattable/Adaptable
Vespa 50 V5A1T N/L/R
Vespa 50 Special V5A2T>3T
Marmitta Padellino Dexter Racing 4.0 by W1R – Vespa Smallframe
Main Features
New version updated 4.0 developed in collaboration with W1R
Manifold with an internal diameter of 32 mm
Reduced noise compared to a classic Proma
Original-like “padellino” aesthetics
Excellent torque at low and mid-range
Allows optimal use of the 4th gear
Plug & play installation without modifications
Compatibility
Vespa 50 Special
Vespa 50 R
Vespa 50 L
Vespa 50 N
Configurations stroke 43 and stroke 51
The new version 4.0 is also compatible with:
Vespa 125 Primavera with side compartment
For correct installation, you can use:
3.00-10
90/90-10
Polished Aluminum Semicircle LARGE | Width 95mm | For Tires 100/90 R10 and 130/70 R10 for Ape 50
Ape 50
polished aluminum semicircle size LARGE
-width 95mm
-can be used with original tires 100/90 R10 or 130/70 R10
Electronic ignition DEXTER racing 1.45 kg with 5-wire electric starter for Ape 50-Ape 50 FL2-Ape 50 FL3
Ape 50-Ape 50 FL2-Ape 50 FL3
Dedicated ignition for Ape with aluminum fan machined from solid and starter ring with motor
-variable advance-flywheel of 1450g-12 volt output for battery charging
-instructions for electrical connections
Front disc brake kit Dexter Racing Classic Black edition for Vespa 50/90/125 Primavera ET3/PK
Vespa 50/90/125 Primavera ET3
Vespa 50 PK S/XL
Dexter Racing Disc Brake Conversion Kit for Original Vespa Smallframe Fork (V50/90/125 Primavera ET3/PK)
The Dexter Racing kit represents the ultimate evolution for those who wish to install a disc brake on a Vespa Smallframe while maintaining the original fork. The great innovation of this system lies in the replacement of only the swinging hub: this allows for modern and adjustable braking power without having to modify the frame, cut the mudguard, or replace the entire fork. The result is a clean, integrated aesthetic upgrade that is completely reversible if necessary.
Technical and Construction Features
The swinging arm and wheel hub are made of solid aluminum through CNC machining, ensuring maximum rigidity and precision.
The hub is designed to maintain an almost original look.
Caliper Mount: Radial mount with 82 mm spacing.
Wheel Compatibility: Designed for 10-inch wheels (also compatible with tubeless configurations depending on the wheel).
Anti-Dive TechnologyOne of the historical flaws of the Smallframe fork is excessive dive during braking. Dexter has solved this problem by redesigning the shock absorber
Dexter pan exhaust (28 mm outlet) for Vespa 50 N/L/R-Special/ 90-125 Primavera ET3
Vespa 50 Special V5B3T
Adaptable
Vespa 50 V5A1T N/L/R
Vespa 50 Special V5A2T>3T
Marmitta Padellino Dexter Racing 3.0 by W1R – Vespa Smallframe
Main Features
New version updated 3.0 developed in collaboration with W1R
Collector with 32 mm inner diameter
Reduced noise compared to a classic Proma
Original “padellino” style aesthetics
Excellent torque at low and mid-range
Allows optimal use of the 4th gear
Plug & play installation without modifications
Compatibility
Vespa 50 Special
Vespa 50 R
Vespa 50 L
Vespa 50 N
Configurations stroke 43 and stroke 51
The new version 3.0 is also compatible with:
Vespa 125 Primavera with side compartment
For correct installation, it is possible to use:
3.00-10
90/90-10
DEXTER racing clutch plate with axial thrust bearing for Vespa 50-125/PV/ET3/PK/S/XL/VNA-TS/150 VBA-Super/PX80-150/PE/Lusso
Vespa 50/90/125/150/200
Dexter intake manifold carburetor 24/25 PHBL female connection for Ape 50 P-TM-FL-FL2-FL3-RST MIX
Ape 50 P-TM-FL-FL2-FL3-RST MIX
28 mm attack
Dexter Racing "Sport Production" expansion exhaust for Vespa 50/90/125 New VMA1T/125 Primavera VMA2T/ET3 VMB1T
Vespa 50/90/125 New VMA1T/125 Primavera VMA2T/ET3 VMB1T
Vespa PK
Expansion exhaust designed for Vespa Smallframe engines, developed to offer sporty power delivery, excellent performance increase, and a full and aggressive sound, while maintaining good torque at low revs.
Technical specifications
Compatible with cylinders with exhaust pitch 52 mm / 56 mm
Internal collector diameter: 32 mm
Compatible with 3.50 R10 tires
Requires short fourth gear to make the most of the usage range
Frame compatibility
Vespa 50 Special
Vespa 50 N / L / R
Vespa ET3
Vespa Primavera (also with glove box)
Also compatible with:
Vespa PK
Vespa HP
Vespa FL2
Vespa ETS
On PK, HP, FL2, and ETS models, removal of the frame panel is necessary.
Performance
This expansion has been developed to ensure:
Excellent push at high revs
Good torque at low revs without overly
Dexter Racing "Summer" expansion exhaust for Vespa 50/90/125 New VMA1T/125 Primavera VMA2T/ET3 VMB1T
Vespa 50/90/125 Nuova VMA1T/125 Primavera VMA2T/ET3 VMB1T
Vespa PK
Expansion exhaust designed for Vespa Smallframe engines, developed to offer sporty power delivery, excellent performance increase, and a full and aggressive sound, while maintaining good low-end torque.
Technical features
Compatible with cylinders with exhaust center distance 52 mm / 56 mm
Inner diameter of the manifold: 32 mm
Compatible with tires 3.50 R10
Requires short fourth gear to make the most of the usage range
Frame compatibility
Vespa 50 Special
Vespa 50 N / L / R
Vespa ET3
Vespa Primavera (also with glove box)
Also compatible with:
Vespa PK
Vespa HP
Vespa FL2
Vespa ETS
On PK, HP, FL2, and ETS models, removal of the frame partition is necessary.
Performance
This expansion was developed to ensure:
Excellent thrust at high revs
Good low-end torque without significantly compromising road
Dexter pan exhaust (32 mm outlet) for Vespa 50 N/L/R-Special/ 90-125 Primavera ET3
Vespa 50 Special V5B3T
Adaptable/Adaptable
Vespa 50 V5A1T N/L/R
Vespa 50 Special V5A2T>3T
Marmitta Padellino Dexter Racing 3.0 by W1R – Vespa Smallframe
Main Features
New version updated 3.0 developed in collaboration with W1R
Manifold with 32 mm internal diameter
Reduced noise compared to a classic Proma
Original “padellino” look
Excellent torque at low and mid-range
Allows optimal use of the 4th gear
Plug & play installation without modifications
Compatibility
Vespa 50 Special
Vespa 50 R
Vespa 50 L
Vespa 50 N
Configurations stroke 43 and stroke 51
The new version 3.0 is also compatible with:
Vespa 125 Primavera with side glovebox
For correct installation, you can use:
3.00-10
90/90-10
Dexter expansion exhaust for Vespa 200 Rally/P200E/PX200 E/Lusso/'98/MY/Cosa 200
Vespa 200 Rally/P200E/PX200 E/Lusso/'98/MY/Cosa 200
With E13 homologation mark
Expansion exhaust (60 mm center distance) for Piaggio Ape 50 All models
Ape 50
Thermal groups with 60/62mm center distance type Parmakit, Falc Rotax
Dexter expansion exhaust (Thermal groups 115CC-130CC) for Piaggio Ape 50 All models
Ape 50
Exhaust for cylinders with 52/56mm center distance
Manifold internal diameter 32mm
Great for both 100/115cc cylinders and 130/144, both aluminum and cast iron
Excellent performance from low revs and good extension beyond 10000 rpm
Dexter Modern Box Muffler (28 mm exhaust) for Vespa PK80-125 S/PK100-125XL/PK125/ETS/N/XL2
Vespa 50 PKS/XL/HP/FL2- PK80-125 S/PK100-125XL/PK125/ETS/N/XL2
Modified PK / HP Padellino – Dexter Racing x WhiteOne Racing
The Modern Box 28 is born from the collaboration between Dexter Racing and WhiteOne Racing, with the aim of offering a high-performance semi-expansion with an almost original look, ideal for Vespa PK and HP.
Designed to ensure a perfect balance between performance, low noise, and discreet aesthetics, it represents the ideal solution for those who want to improve power delivery without sacrificing a sober design.
✅ Technical Features
-Available with an inner diameter collector of 28 mm or 32 mm
-Noise lower than a Proma
-Original-like aesthetics (modern padellino style)
-Great torque to make the most of the 4th gear
-Plug & play installation on Vespa PK and HP stroke 43 and 51
-Compatible with 3.00 R10 and 90/90 R10 tires
-Slightly shorter collector compared to the Classic Box to avoid interference with the partition (can be further shortened if necessary)
-
Lamellar intake manifold DEXTER racing for Vespa 125 VNB-TS/150 VBA-Super/Rally/PX80-200/PE/T5/Cosa
Vespa 125 GT VNL2T
Vespa 125 GTR VNL2T
Vespa 125 TS VNL3T
Vespa 125 PX
Vespa 150 Sprint VLB1T
Vespa 150 Sprint Veloce VLB1T
Vespa 150 PX
Vespa 200 PE
For carburetor PHBH 28/30/VHS 24-30/TMX 27/30/PWK 28/30
passage: 30mm
carburetor connection: 34mm
DEXTER racing intake manifold with valve for Vespa 125 VNB-TS/150 VBA-Super/Rally/PX80-200/PE/T5/Cosa
Vespa 125 GT VNL2T
Vespa 125 GTR VNL2T
Vespa 125 TS VNL3T
Vespa 125 PX
Vespa 150 Sprint VLB1T
Vespa 150 Sprint Veloce VLB1T
Vespa 150 PX
Vespa 200 PE
For carburetor PHBH 28/30/VHS 24-30/TMX 27/30/PWK 28/30
passage: 30mm
improved inclination to keep the carburetor as flat as possible
Silent-block engine crossbar Dexter racing, stainless steel/polyurethane for original Piaggio Vespa engine casings V50, V90, SS50, SS90, PV125, ET3, PK S, PK XL
Vespa 50 V5A1T 92877>
Vespa 50 Special V5A2>3T
Vespa 50 Special V5B1T>3T
Vespa 50 PK
Vespa 90 V9A1T 25001>
Vespa 90 SS V9SS2T
Vespa 125 Primavera VMA1T>2T
Vespa 125 Primavera ET3 VMB1T
Vespa 125 PK
Silent-block engine crossbar Dexter racing (soft) in aluminum/polyurethane, for original Piaggio engine casings for Vespa 125/150 TS-GT-GTR-VNA-VNB-VBB-VBA-GL-PX
Vespa 125 VNA1>2T
Vespa 125 VNB1>6T
Vespa 125 GT VNL2T
Vespa 125 GTR VNL2T
Vespa 125 TS VNL3T
Vespa 125 Super
Vespa 150 VBA1T
Vespa 150 VBB1>2T
Vespa 150 Super VBC1T
Vespa 150 GL VLA1T
Vespa 150 Sprint VLB1T
Vespa 150 Sprint Veloce VLB1T
Vespa 125 PX First series
Vespa 150 PX First series
-rubber pads with calibrated hardness of your choice
-4 shims for load calibration during assembly
-threaded aluminum tubes for very easy assembly
DEXTER racing exhaust for Vespa 125 GT/GTR/TS/150 GL/Sprint/V/PX80-150/PE/Lusso/Cosa 1
Vespa 125 GT/GTR/TS/150 GL/Sprint/V/PX80-150/PE/Lusso/Cosa 1
-exhaust for Vespa PX with 177/190 cylinders both cast iron and aluminum
-excellent performance from low revs
-fits with center stand and spare wheel
Dexter racing hardened steel key kit for Vespa 50 Special-N-L-R/90/125 Primavera ET3-PK-ETS/Ape 50
Vespa 50 V5A1T N,L,R
Vespa 50 Special V5A2>3T
Vespa 50 Special V5B1>4T
Vespa 90 V9A1T
Vespa 125 Primavera VMA1T>2T
Vespa 125 Primavera ET3 VMB1T
Vespa PK
High-strength keys for Ape and Vespa made of hardened steel. It is recommended to check the protrusion after installation. It may be necessary to adjust the height
-sprocket
-flywheel
-clutch
Dexter Racing full circle crankshaft 83mm, cone 20, rod 97, stroke 51 for Vespa 50/90/125 Primavera-ET3-PK
Vespa 125 Primavera VMA1T>2T
Vespa 125 Primavera ET3 VMB1T
Vespa 125 PK S/XL/N/HP
Full Shoulder Crankshaft with 83 mm shoulders, 51 mm stroke, 97 mm copper-plated connecting rod, and 20 mm taper.
-shoulder diameter 83mm (no need to bore)
-width 35mm (standard)
-stroke 51mm
-weight approximately 1.3kg
Dexter Racing full circle crankshaft 83mm, taper 19, rod 97, stroke 51 for Vespa 50/90/125 Primavera-ET3-PK-Ape 50
Vespa 125 Primavera VMA1T>2T
Vespa 125 Primavera ET3 VMB1T
Vespa 125 PK S/XL/N/HP
Full Circle Crankshaft with 83 mm webs, 51 mm stroke, 97 mm copper-plated rod, and 19 mm taper.
-webs diameter 83mm (no boring needed)
-width 35mm (standard)
-stroke 51mm
-weight approximately 1.3kg
Complete DEXTER brake pump kit for Vespa 50/90/125 Primavera/ET3/GT/GTR/Super/TS/150 Sprint/Sprint V/GL/Super/180SS/Rally
Vespa GT/GTR/Super/TS/150 Sprint/Sprint V/GL/Super/180SS/Rally
Front disc brake kit Dexter Racing (caliper color of choice) for Vespa 125 GT/GTR/TS/150 Sprint/V/GL/P150S /Rally/PX80-200/PE/Lusso/´98 /MY/´11/T5
Vespa 125 GT/GTR/TS/150 GL/Sprint/V//Rally/TS
Front Disc Brake Kit with Integrated Anti-Dive System – Patented
For Vespa Rally, Sprint, GL, TS, GT (Traditional 10" Wheel)
Are you looking for the safety of modern braking without ruining the classic line of your Vespa? This kit represents the ultimate technological evolution for past Largeframe models. A new generation braking system that combines stopping power, handling, and safety on rough roads, drastically reducing the annoying front dive during braking.
Everything is engineered to maintain an absolutely original aesthetic appearance, well integrated with the vintage design: no visual compromise, just pure effectiveness.
🛠️ Applications and Compatibility
The kit is ready to install and specific for all Vespas with a traditional 10" wheel and fork of the same type, including:
Vespa 180 / 200 Rally
Vespa 150 Sprint / Sprint Veloce
Vespa 150 GL
Vespa 125 TS
Vespa 125 GT / GTR
And all models with equivalent wheel axle and front chassis.
💎 The Patented Innovation (System with Pat
40 mm Spacer Kit for Wheel Rim Channel Widening for Ape 50
Ape 50
Ape 50
Electronic ignition DEXTER racing 1.6kg with 5-wire electric start for Ape 50-Ape 50 FL2-Ape 50 FL3
Ape 50-Ape 50 FL2-Ape 50 FL3
Complete ignition dedicated to the Ape with Elestart for bulky cylinders, full aluminum fan, and ring for electric start with starter gear
excellent for bulky cylinders such as egig 170 - 180 cc
-SIP VAPE electronics
-variable advance-flywheel weighing 1605g-12 volt output for battery charging
-instructions for electrical connections
Dexter Racing full circle crankshaft 87mm, cone 20, rod 97, stroke 51 for Vespa 50/90/125 Primavera-ET3-PK-Ape 50
Vespa 125 Primavera VMA1T>2T
Vespa 125 Primavera ET3 VMB1T
Vespa 125 PK S/XL/N/HP
Ape 50
Full Circle Crankshaft with 87 mm webs, 51 mm stroke, 97 mm copper-plated connecting rod, and 20 mm taper.
-web diameter 87mm (requires boring)
-width 35mm (standard)
-stroke 51mm
-weight approximately 1.3kg
Reinforced engine casings Dexter racing for Ape 50 all models
Ape 50
-developed and tested on race fields
-fully customizable shaft and cylinder measurements
-customizable cylinder support plane height
-option for cylinder perforations of choice
-both electric and pull start
-assembly instructions
If not otherwise requested:
-bore for shaft 87mm x35mm
-plane height +5mm
Dexter Modern Box Muffler (32 mm exhaust) for Vespa PK80-125 S/PK100 -125XL/PK125/ETS/N/XL2
Vespa 50 PKS/XL/HP/FL2- PK80-125 S/PK100-125XL/PK125/ETS/N/XL2
Modified Padellino PK / HP – Dexter Racing x WhiteOne Racing
The Modern Box 28 is born from the collaboration between Dexter Racing and WhiteOne Racing, with the aim of offering a high-performance semi-expansion with an almost original look, ideal for Vespa PK and HP.
Designed to ensure a perfect balance between performance, low noise, and discreet aesthetics, it represents the ideal solution for those who want to improve power delivery without sacrificing a sober design.
✅ Technical Features
-Available with an internal diameter manifold of 28 mm or 32 mm
-Noise lower than a Proma
-Similar original aesthetics (modern padellino style)
-Excellent torque for optimal use of the 4th gear
-Plug & play installation on Vespa PK and HP stroke 43 and 51
-Compatible with tires 3.00 R10 and 90/90 R10
-Slightly shorter manifold compared to the Classic Box to avoid interference with the partition (further shorten if necessary)<
Albero motore Dexter racing superLip spalle piene cono 20 corsa 60 biella 105 per Vespa 125/150 PX-Sprint Veloce
Vespa 125 PX VNX1>2T
Vespa 125 PX ZAPM 74100
Vespa 125 TS VNL3T 18139>
Vespa 125 GTR VNL2T 145901>
Vespa 125 Cosa VNR1T
Vespa 150 Cosa VLR1T
Vespa 150 Sprint Veloce VLB1T 294260>
Vespa 150 Super VBC1T 412374>
Vespa 150 PX 2011 ZAPM 74200
Corsa 60 mm
Biella 105
Spalle piene
-inserto di appesantimento e bilanciatura
-disponibile con diverse tipologia di biella
-peso circa 1.9kg
Lamellar intake manifold to the crankcase Dexter racing elastic carburetor fitting 26/30 for Vespa 50-125 PK/S/XL/N/HP/FL2
Vespa 50-125 PK/S/XL/N/HP/FL2
-choice for carburetors 24/25 26/30 34/37
-suitable for both 2 and 3 hole casings
-mounts without modifying the frame
-does not touch the bottom of the well
Lamellar intake manifold to crankcase Dexter racing 2 holes elastic carburetor connection 26/30 for Vespa 50/90/125 Primavera ET3
Vespa 50/90/125 Primavera ET3
-choice for carburetors 24/25 26/30 34/37
-suitable for both 2-hole and 3-hole crankcases
-mounts without modifying the frame
-does not touch the bottom of the well
Rear shock absorber setback bracket Dexter racing for Vespa 50/90/125 Primavera ET3
Vespa 50/90/125 Primavera ET3
-allows the shock absorber to be moved back and make more space for the mufflers with a larger exhaust manifold
-raises the rear of the Vespa by about 3cm
-shaped reinforcement washer to prevent cracks in the frame
Hai visualizzato 35 di 35 prodotti