BGM
BGM PRO Big Box SPORT (BBS) exhaust for Vespa 200 PE-Rally
Vespa PE 200
Vespa 200 Rally VSE1T
Painted in black
1 mm BGM Pro thickness between head and cylinder (177/187cc) for Vespa PX125/PX150/Cosa125/Cosa150/GTR125/TS/Sprint Veloce (VLB1T 0150001
Vespa PX125/PX150/Cosa125/Cosa150/GTR125/TS/Sprint Veloce (VLB1T 0150001-)
BGM Classic Tire 3.00-10 TT 50P 150 km/h for Vespa 50 Special V5B3T/90 V9A1T-125 Primavera ET3-PK
Vespa 50 V5B1>4T
Vespa 50 V5SA1T
Vespa 90 V9A1T
Vespa 125 Primavera VMA1T>2T
Vespa PK
Vespa 125 Primavera ET3 VMB1T
3.00/10
Black
Chrome central stand BGM PRO Soft Stop System for Vespa 125/150/160/180/200 VNB-GT-GL-TS-Sprint-VBB-SS-Rally-GS
Vespa 125/150/160/180/200 VNB-GT-GL-TS-Sprint-VBB-SS-Rally-GS
Thanks to the BGM PRO center stand soft stop system, the stand's feet
will no longer hit the footboard of your Vespa.
As
with Vespa PX models, the stand stop is now positioned
on the stable mounting brackets present on the central tunnel. The center stand is locked at the right point without causing the footboard to vibrate.
Closing the stand will be less noisy and the frame will be less
subject to impacts or damage as was the case with the
original center stand.
The Soft Stop center stand
comes with the respective brackets that have additional
plates on which the stand is positioned. These plates
prevent direct contact between the stand tube and the frame
ensuring the latter remains intact. The original center stand, however, scratched the paint on the footboard.
Complete stator BGM PRO HP V2.0 for Vespa 125/150/200 PX-PE without electric start
Vespa 125 PX VNX2T
Vespa 150 VLX1T
Vespa PX 200E VSX1T
Rainbow Series
12V electronic stator with 5 wires consisting of: Round connector with 2 wires: Black and Blue; 3 wires in color: white, green, red.
BGM PRO Cush Drive Kit for Vespa 50/90/125 Primavera ET3-PK/S/XL/N/HP/FL
Vespa 50 V5A1T N,L,R
Vespa 50 PK
Vespa 90 V9A1T
Vespa 125 Primavera VMA1>2T
Vespa 125 Primavera ET3 VMB1T
Vespa 125 PK
Zinc-plated central stand BGM- Pro soft stop system for Vespa 50 R/Special/SS/90/125 Primavera ET3
Vespa 50 R V5A1T
Vespa 50 Special
Vespa 50 Special Elestart
Vespa 125 Primavera VMA2T
Vespa 125 Primavera ET3 VMB1T
Thanks to the soft stop system of the BGM PRO central stand, the feet
of the stand will no longer hit against the footboard of your Vespa.
As
with the Vespa PX models, the stop of the stand is now positioned
on the stable mounting brackets present on the central tunnel. The central stand is locked at the right point without making the footboard vibrate.
Closing the stand will be less noisy and the frame will be less
subject to impacts or damage as was the case when using the
original central stand.
The Soft Stop central stand
comes with the related brackets that have additional
plates on which the stand is positioned. These plates
prevent direct contact between the stand tube and the frame
ensuring that the latter remains intact. The original central
stand, however, scratched the paint of the footboard.
External coil - BGM PRO with fixed timing for IDM ignition - Ducati blue type Vespa PX, PK, Lambretta - used for Polini IDM, Vespatronic, VesPower, Varitronic, Flytech, Parmakit
for IDM ignition - Ducati type blue Vespa PX, PK, Lambretta - used for Polini IDM, Vespatronic, VesPower, Varitronic, Flytech, Parmakit
The breathable back ensures particular comfort. The thin 100% nylon yarn offers a perfect fit. The polyurethane coating ensures an optimal grip and high tactile sensitivity. At the same time, it protects hands from oil and dirt. Ideal for tasks that require high protection and, at the same time, a good sense of touch.
Crankshaft - BGM Pro Touring (rotary valve) stroke 60mm Vespa 200 Rally VSE1T 33997 -
Vespa 200 Rally VSE1T
Vespa 200 PE VSX1T
Vespa 200 Cosa VSR1>2T
Vespa 200 PE VSX1T Millennium '98
MATERIAL The bgm PRO Touring crankshafts are forged. The material is denser, so it dissipates heat better and is therefore more resistant to distortion. In addition to the crank webs, the connecting rod is also forged and then CNC machined. LUBRICATION
The lower connecting rod bearing is lubricated via two large lubrication slots and a total of four additional pockets on the side. The SSC rolling bearing and side thrust washers provide a solid bearing. The lubrication of the upper connecting rod bearing is done through two lubrication holes. The INA piston pin bearing is included with the crankshaft.
The shaft is available with a long stroke of 60mm (long stroke) and with a 57mm stroke
(standard). With the long stroke version, you get a larger displacement, while at the same time the cylinder control angles (overflow and exhaust ports) can be modified to increase performance. GEAR ANGLE Compared to many other racing shafts, the bgm PRO Touring shaft has a much better intake layout. For
tuning cylinders, the standard wave, with its very short intake time, cannot keep up with the standard wave. The bgm PRO shaft, on the other hand, closes on a PX engine
Thermal group-BGM PRO 177 cc (also for Elestart/electric start) for Vespa 125/150 Sprint V-GTR-TS-PX
Vespa 125 PX
Vespa 125 GT/GTR/TS
Vespa 125 Cosa
Vespa 150 PX
Vespa 150 Sprint Veloce
Vespa 150 Cosa
PERFORMANCE EVERY DAY The BGM177 cylinder is
a very powerful, durable, and completely
everyday conversion cylinder. It covers a very wide range of applications. Simply
by swapping the cylinder, you can more than double the power of the standard
125cc engine and easily ride the wave of great torque.
Similarly, the exact same cylinder can turn the engine
into a beast with over 20 HP if it finds the right environment (carburetor,
exhaust, crankshaft). Thus, the cylinder offers beginners a
perfect base to be able to expand this, as needed,
more and more. The BGM PRO 177 replaces the original cylinder,
the conversion is simple and easy to reverse if necessary.
With its large displacement of 177cc, the BGM PRO 177 always offers
a safe and relaxed driving experience. The engine is as powerful as a
200cc machine, but with exactly the same reliability and durability.
It achieves this by operating in the same RPM range as a standard engine. The
low fuel consumption and the high range associated with it are
Chrome central stand BGM- Pro soft stop system for Vespa 50 R/Special/SS/90/125 Primavera ET3
Vespa 50 R V5A1T
Vespa 50 Special
Vespa 50 Special Elestart
Vespa 125 Primavera VMA2T
Vespa 125 Primavera ET3 VMB1T
Thanks to the soft stop system of the BGM PRO central stand, the feet
of the stand will no longer hit against your Vespa's footboard.
As
with the Vespa PX models, the stop of the stand is now positioned
on the stable mounting brackets present on the central tunnel. The central stand is locked at the right point without making the footboard vibrate.
Closing the stand will be less noisy and the frame will be less
subject to impacts or damage as it used to happen with the
original central stand.
The Soft Stop central stand
comes with the respective brackets that have additional
plates on which the stand is positioned. These plates
prevent direct contact between the stand tube and the frame
ensuring that the latter remains intact. The original central stand, on the other hand, scratched the paint of the footboard.
Clutch spacer washer (08-1.6mm) for Lambretta 125/150/175 LI-LIS-SX-TV (series 2-3) DL-GP
Lambretta 125/150/175 LI-LIS-SX-TV (series 2-3)DL-GP
Thrust washer for gearbox gears (1.8-2.6mm) for Lambretta 125/150/175/200 LI-DL-SX-TV
Lambretta 125/150/175/200 LI-DL-SX-TV
Universal
Carburetor jet reamer tool with 12 reamers (from 0.6 to 1.9 mm)
All models
Clutch disc kit - BGM Pro Superstrong type Honda CR80 (on original spider clutch) for Vespa Cosa2/FL (1992-), PX (1995-)
Vespa Cosa2/FL (1992-), PX (1995-)
The advantages are a lighter clutch that separates more quickly and is extremely durable.
Despite the seemingly smaller pad surface, the clutch with the CR pad type can transmit more torque with the same elastic force. For this, only the effective radius is decisive, not the size of the friction surface as such (this is only relevant for wear).
Thanks to the extremely durable pad material, CR pads can also be used in very powerful engines in everyday use. A major advantage is the taller clutch discs compared to the
original discs.
RECOMMENDATION We also recommend a low-alloy gear oil of API GL3/GL4 classes for high-performance engines to prevent clutch slippage even under extreme loads.
Note: The entire lining package is approximately 1 mm lower with these linings
After installing the clutch, check if the clutch touches the clutch cover. If necessary, rework the whole thing or use an outward-facing cover. Alternatively, you can use the spacer ring we offer separately
Spacer set for silent block engine -BGM PRO, l=7.5mm- for Vespa PX200/Rally 200 (VSE1T) (2nd series) (on Malossi engine casing)
Vespa 125 PX T5 VNX5T
Vespa PX rainbow series
Vespa 200 Rally 0040654 >
Vespa 200 PE VSX1T
Some Malossi V-One/VR-One engine housings have very deep holes for the silent crossbar rubbers. To prevent the engine from moving laterally and potentially touching the frame, we offer special spacer bushings.
Complete transmission kit - BGM ORIGINAL, inner sheath in PE for Vespa 125/150/200 PX Arcobaleno
Vespa PX Rainbow
To make the operation simpler and more precise, the outer shell of the front brake, the gear shift, the throttle, and the clutch have a layer of very low friction PE inside. The inner cables can be oiled or greased, but this makes them extremely smooth.
Clutch Spring Kit -BGM PRO XXL- Vespa Cosa2 125, Cosa2 150, Cosa2 200, PX 125 (1995-), PX 150 (1995-), PX 200 (1995-) - 10 pcs
Vespa 125 VNB/GT/GTR/TS/PX
Vespa 150 VBB/GL/Sprint/Sprint Veloce/PX
Vespa 200 PE
The bgm PRO clutch springs are produced in Germany and are subject to continuous quality control. The material used, Oteva70®, makes the spring block stable and true to size. The spring does not deviate laterally until it is blocked, and once unloaded, it returns to its original length. The clutch spring retains all its elastic strength. The spring rate is significantly tighter than that of an original spring. Ideal for high-performance engines.
BGM Pro Clutch Gear - Pro Superstrong Z 22 for 64/65 Tooth Cush Drive Gear Vespa 200-PX-PE-Rally
Vespa 200 PE
Vespa 200 Rally
Developed for the high performance and torque of today's engines, they are made of highly alloyed steel (SCM415/15 CrMo 5), in compliance with the highest production standards. The enormous strength of the base material (up to 1100N/mm2, HRC 58-62) is a reliable foundation for the production of BGM sprockets.
The production meets the high standards in place for Honda gear manufacturing. Each individual piece is accompanied by a test report, allowing BGM to have continuous and lasting quality assurance.
High-quality material 15 CrMo 5
Precise production according to Honda standards
Continuous quality controls
Compatible with COSA2 clutches
Available with 22, 23, and 24 teeth
Compatible with the original primary of all 200 c.c. engines
Compatible with engines with original primary retrofitted with 65 teeth or with BGM primary with 64/65 teeth
Complete clutch BGM Pro Superstrong CNC Z 20 for elastic gear 67/68 teeth Vespa 125/150/200 Sprint-S.Veloce-GT-GTR-TS-PX-PE
Vespa 125 VNB/GT/GTR/TS/PX
Vespa 150 VBB/GL/Sprint/Sprint Veloce/PX
Vespa 200 PE
BGM PRO Super Strong clutch What is a plug and play solution - Made
in Germany. You get a ready-to-install clutch product with reinforced
clutch springs that works well in a power range up to 20hp / 22Nm. With
stiff springs available separately, the clutch does not disappoint, even
with configurations of more than 40 hp.
Adapter cable kit for indicator conversion -BGM PRO update 2003-2013 => 2014- Vespa GTS front and rear - used for post-2014 indicator models on pre-2014 vehicles
Vespa 125/150/300 GTS-GTS Super
to adapt indicators from post-2014 models to pre-2003 GTS
Long stroke crankshaft -BGM Evolution 2 stroke 55mm, connecting rod 110mm, flywheels Ø=90mm- Piaggio Maxi 2-stroke - incl. spacer, Aprilia SR125, Gilera Runner 125FX, 180FXR, Italjet Dragster 125, 180, Piaggio SKR125, SKR150, TPH125, Skipper125, Skipper150
Piaggio Maxi 2-stroke - incl. spacer, Aprilia SR125, Gilera Runner 125FX, 180FXR, Italjet Dragster 125, 180, Piaggio SKR125, SKR150, TPH125, Skipper125, Skipper15
Bearings-->16x20x20mm
Stroke--> 55 mm
Base--> 5 mm
Vespa 125 Primavera VMA1T>2T
Vespa 125 Primavera ET3 VMB1T
Vespa 125 PK S/XL/N/HP
Cone 20 mm, stroke 54 mm, connecting rod 105 mm
Shoulder--> 86 mm weight 130 gr
For reed valve intake.
BGM Pro cruciform with thread for Vespa PX PE 80 cc (V8X1T>100230)/125 cc (VNX2T>232052)/150 cc (VLX1T>624301)/200 cc (VSX1T>315266)/Rally180 (VSD1T 26849>/Rally200
Vespa 125 GT VNL1>2T 78301>
Vespa 125 GTR VNL2T 124014>
Vespa 125 TS VNL3T
Vespa 125 PX VNX1T>2T > 232052
Vespa 150 Super VBC1T 181687>
Vespa 150 Sprint VLB1T 1.170240>
Vespa 150 Sprint Veloce VLB1T 0169301>
Vespa 150 PX VLX1T > 624301
Vespa 180 Rally VSD1T 0026849>
Vespa 200 Rally VSE1T 004476>
Vespa 200 PE VSX1T > 315266
1 mm cylinder base BGM PRO for Malossi 210/Polini 207/Polini 210/Polini 221/Pinasco 213/Pinasco 225/Vespa PX200/COSA200/Rally200 cylinders
Vespa 200 Rally VSE1T
Vespa P 200 E VSX1T
Vespa PX 200 E VSX1T
Vespa PX 200 E Rainbow VSX1T
Vespa PX 200 E Rainbow Elestart VSX1T
Vespa 200 PE VSX1T Millennium '98
Vespa 200 Cosa VSR1T
BGM Pro Cross (Flat Type) for Vespa PX Arcobaleno 80cc (V8X1T100231>)/125 cc (VNX2T 232053>)/150 cc (VLX1T 624302>)/200 cc (VSX1T315267>)/T5 125 cc Cosa
Vespa 125 PX VNX2T 232053>
Vespa 150 PX 624302>
Vespa 200 PE VSX1T 315267>
Vespa 200 Cosa VSR1T
The BGM Pro cross is a high-quality product made of 15CrMo5 (SCM415) chrome-molybdenum steel, it is very durable and at the same time offers elasticity to protect the gears from breakage.
3-way connector complete with terminals for electrical system wiring/switches
Vespa 50 PK S/XL
Vespa 80 PK S/SS
Vespa 80 PX V8X1T 100001>
Vespa 125 PK ETS VMS1T
Vespa 125 PK S/ Elestart
Vespa 125 PX VNX2T Arcobaleno 200001>
Vespa 150 PX 2011 ZAPC74200
Vespa 150 PX Millennium
Vespa 150 PX Arcobaleno VLX1T
Vespa 200 PX Arcobaleno VSX1T
Vespa 200 PX Millennium VSX1T
5-way connector complete with terminals for wiring electrical system/switches
Vespa 50 PK S/XL
Vespa 80 PK S/SS
Vespa 80 PX V8X1T 100001>
Vespa 125 PK ETS VMS1T
Vespa 125 PK S/ Elestart
Vespa 125 PX VNX2T Arcobaleno 200001>
Vespa 150 PX 2011 ZAPC74200
Vespa 150 PX Millenium
Vespa 150 PX Arcobaleno VLX1T
Vespa 200 PX Arcobaleno VSX1T
Vespa 200 PX Millenium VSX1T
6-way connector complete with terminals for electrical system/switches wiring
Vespa 50 PK S/XL
Vespa 80 PK S/SS
Vespa 80 PX V8X1T 100001>
Vespa 125 PK ETS VMS1T
Vespa 125 PK S/ Elestart
Vespa 125 PX VNX2T Arcobaleno 200001>
Vespa 150 PX 2011 ZAPC74200
Vespa 150 PX Millennium
Vespa 150 PX Arcobaleno VLX1T
Vespa 200 PX Arcobaleno VSX1T
Vespa 200 PX Millennium VSX1T
Cylinder base gasket 1.5 mm BGM PRO for Malossi 210/Polini 207/Polini 210/Polini 221/Pinasco 213/Pinasco 225/Vespa PX200/COSA200/Rally200 cylinders
Vespa 200 Rally VSE1T
Vespa P 200 E VSX1T
Vespa PX 200 E VSX1T
Vespa PX 200 E Rainbow VSX1T
Vespa PX 200 E Rainbow Elestart VSX1T
Vespa 200 PE VSX1T Millennium '98
Vespa 200 Thing VSR1T