BGM
BGM Pro silicone engine gasket kit for Vespa 125 GTR 2°/TS 2°/150 Super 2°/Sprint V 2°/PX80-200/PE/Lusso/'98/MY/'11/Cosa
Vespa P 80 V8A1T
Vespa PX 80 E V8X1T
Vespa 125 GT R VNL2T 145901>
Vespa 125 TS VNL3T 18139>
Vespa P 125 X VNX1T
Vespa PX 125 E VNX2T
Vespa 125 PX E Arcobaleno VNX2T
Vespa 125 PX E Arcobaleno Elestart VNX2T
Vespa 125 PX CAT ZAPM50100 '07
Vespa 125 PX VNX1T Millennium '98>'05
Vespa 125 Cosa VNR1T
Vespa 125 Cosa 2 VNR2T
Vespa 125 PX 2011 ZAPM74100 2T AC
Vespa 150 Super VBC1T 412374>
Vespa 150 Sprint Veloce VLB1T 294260>
Vespa P 150 X VLX1T
Vespa
The BGM PRO silicone gasket kits consist of a high-quality gasket paper with a thickness of 0.5 mm (like the original "green" Piaggio). Additionally, the gaskets, which are always in contact with oil, already have a layer of silicone sealant applied. This results in greater surface pressure of the gasket. Furthermore, the silicone sealant seals the cold engine much better thanks to the permanently flexible sealing compound. This way, the engine always remains tight and the oil stays in place and is useful.
100% Made in Italy
BGM Pro FKM engine oil seal kit (E10/ethanol resistant) for Vespa 125 VNB/GT/GTR/Super-150 VBA/VBB/GL/Sprint/Super
Vespa 125 VNB1T > VNB6T
Vespa 125 GT VNL1>2T
Vespa 125 GTR VNL2T >145900
Vespa 125 TS VNL3T >18138
Vespa 150 Sprint VLB1T
Vespa 150 Sprint Veloce VLB1T >294259
Vespa 150 VBB1T > VBB2T
Vespa 150 VBA1T
Vespa 150 GL VLA1T
KIT COMPOSED OF:
N.1 CORTECO OIL SEAL 20x62x6.5 CLUTCH SIDE
N.1 CORTECO OIL SEAL 20x40x6 FLYWHEEL SIDE
N.1 CORTECO OIL SEAL (27X37X7) REAR WHEEL
+ O-RINGS
Basic gasket kit for complete thermal group Quattrini 0.25mm/0.50mm/0.75mm (172cc) in aluminum
Vespa 125 PX
Vespa 125 GT/GTR/TS
Vespa 150 PX
Vespa 150 Sprint Veloce
Cuts---> 0.25mm/0.50mm/0.75mm
Cylinder adapter plate set incl. crankshaft -J&G 2% special from WT- for mounting Polini/Malossi 210 cylinders (Ø68.5mm) on engine cases for Vespa 125/150 PX-Sprint Veloce
Vespa 125 PX VNX1>2T
Vespa 125 PX ZAPM 74100
Vespa 125 TS VNL3T 18139>
Vespa 125 GTR VNL2T 145901>
Vespa 125 Cosa VNR1T
Vespa 150 Cosa VLR1T
Vespa 150 Sprint Veloce VLB1T 294260>
Vespa 150 Super VBC1T 412374>
Vespa 150 PX 2011 ZAPM 74200
We subjected the set to a long and thorough stress test on the road and highway. The result is so convincing and reliable that we can now offer it as a set for the expert mechanic.
It allows the use of a Malossi 210 Sport cylinder from the PX200/Rally/Cosa models on the engine casings of the Vespa Largeframe models starting from 1977, the date from which the engine casings were converted to three transfers.
ADAPTER SET
The conversion is based on a crankshaft with rods 20 mm longer (125 mm instead of 105 mm). The solid CNC machined steel adapter plate is bolted to the engine casing and accepts the studs for the PX200 cylinder. A 1.5 mm thick aluminum gasket between the adapter plate and the cylinder base seals the screw holes and establishes the correct installation height.
MALOSSI SPORT
adapter set 07-AA-179-IR is designed for use with a Malossi Sport 210 cylinder. For this purpose, however, it is absolutely necessary to remove the spindle from the engine casing, as the Malossi cylinder base cannot be shortened without losing stability.
Seal Kit for BGM PRO 177/187 cc Cylinder Group for Vespa 125/150 Sprint V-GTR-TS-PX
Vespa 125 PX
Vespa 125 GT/GTR/TS
Vespa 125 Cosa
Vespa 150 PX
Vespa 150 Sprint Veloce
Vespa 150 Cosa
Sealing kit included with the BGM cylinder
This kit includes three base cylinder gaskets and one head gasket.
Gasket thicknesses:
Base gaskets: 0.2mm, 0.4mm, 0.6mm in aluminum
Head gasket: 0.5mm in copper
The variable thickness of the base gaskets allows for optimizing control angles according to specific needs or stroke. For fine adjustments, aluminum spacers for the head are also available.
Clutch -BGM Pro Superstrong 2.0 CR80 Ultralube CNC Z 23 for elastic gear 64/65 teeth Vespa 200-PX-PE-Rally
Vespa 200 PE
Vespa 200 Rally
The Superstrong 2.0 CR joint combines extreme durability, absolute reliability, and ease of use. It is the foundation of every solid engine tuning.
The solid CNC-machined clutch basket has excellent
concentricity and enormous torsional rigidity. It therefore offers perfect
clutch engagement with a well-defined slip point and a clean cut. It is suitable for both the touring rider who appreciates high quality,
and the ambitious racer who seeks an extremely robust and
stable clutch. ULTRALUBE The latest generation Superstrong 2.0 CR clutches are now equipped with a new innovative technology: Ultralube. Ultralube
delivers (through precisely defined holes and centrifugal force)
gear oil both in the high-load hub profile (between the
clutch basket and clutch hub) and in the clutch linings themselves. This technology, unique in the Vespa sector,
makes the legendary Superstrong 2.0 CR clutch even more stable than
it already is. A clutch designed for eternity. PERFORMANCE
The clutch supplied ready for installation is adjusted for a
power range up to approx. 20PS / 22Nm through
Clutch -BGM Pro Superstrong 2.0 CR80 Ultralube CNC Z 24 for elastic gear 64/65 teeth Vespa 200-PX-PE-Rally
Vespa 200 PE
Vespa 200 Rally
The Superstrong 2.0 CR joint combines extreme durability, absolute reliability, and ease of use. It is the foundation of every solid engine tuning.
The solid CNC-machined clutch basket has excellent
concentricity and enormous torsional rigidity. It therefore offers a perfect
clutch engagement with a well-defined bite point and a clean cut. It is suitable for both the touring rider who appreciates high quality,
and the ambitious racer looking for an extremely robust and
stable clutch. ULTRALUBE The latest generation Superstrong 2.0 CR clutches are now equipped with a new innovative technology: Ultralube. Ultralube
delivers (through precisely defined holes and centrifugal force)
gear oil both in the high-load hub profile (between the
clutch basket and the clutch hub) and in the clutch linings themselves. This technology, unique in the Vespa sector,
makes the legendary Superstrong 2.0 CR clutch even more stable than
it already is. A clutch designed for eternity. PERFORMANCE
The clutch provided ready for installation is adjusted for a
power range up to approx. 20PS /
Round faston terminal (male) for electrical system/switches wiring (10pcs)
Vespa 50 PK S/XL
Vespa 80 PK S/SS
Vespa 80 PX V8X1T 100001>
Vespa 125 PK ETS VMS1T
Vespa 125 PK S/ Elestart
Vespa 125 PX VNX2T Arcobaleno 200001>
Vespa 150 PX 2011 ZAPC74200
Vespa 150 PX Millenium
Vespa 150 PX Arcobaleno VLX1T
Vespa 200 PX Arcobaleno VSX1T
Vespa 200 PX Millenium VSX1T
Dimensions--> D.2.1mmxL.20mm
Faston Round Terminal Kit (Female) for Electrical Wiring/Switches (10pcs)
Vespa 50 PK S/XL
Vespa 80 PK S/SS
Vespa 80 PX V8X1T 100001>
Vespa 125 PK ETS VMS1T
Vespa 125 PK S/ Elestart
Vespa 125 PX VNX2T Arcobaleno 200001>
Vespa 150 PX 2011 ZAPC74200
Vespa 150 PX Millennium
Vespa 150 PX Arcobaleno VLX1T
Vespa 200 PX Arcobaleno VSX1T
Vespa 200 PX Millennium VSX1T
Dimensions--> D.2.1mmxL.20mm
Front shock absorber -BGM PRO SC/F16 COMPETITION, 195mm + 205mm-for Vespa 50/125 PX XL-N-HP
Vespa 50 PK XL2/ Elestart V5X3T
Vespa 50 RUSH V5X4T
Vespa 50 PK FL V5N1T
Vespa 50 PK HP V5N2T
Vespa 50 PK N V5X5T
Vespa 50 N Plurimatic V5P1T
Vespa 50 N Plurimatic V5P2T
Vespa 50 PK Automatic V5P2T
Vespa 125 ETS VMS1T
Vespa 125 PK S VMX1T
Vespa 125 PK S VMX5T
Vespa 125 PK S Elestart VMX5T
Vespa PK 125 S Automatic VAM1T
Vespa 125 PK XL VMX6T
Vespa 125 PK XL Elestart VMX6T
Vespa 125 PK XL2 VMX6T
Vespa 125 PK Automatic VVM2T
Vespa 125 N (FL) VMX7T
The shock absorbers from the BGM PRO SC series are the ideal solution for adjustable Vespa suspension, approved with TÜV certificate. Developed in Germany, they are available with ABE (safety certification) for most manual transmission Vespa scooters. These shock absorbers are fully adjustable, offering an exceptional and customizable riding experience. Here are the main features:
- Available individually or in sets
- Sporty design and competitive price
- Made of high-strength aluminum to reduce weight
- CNC anodized body for increased durability
- Adjustable damping up to 12/16 levels and adjustable spring preload
- Quality guaranteed by BGM, also confirmed by professional riders
Two length adapters are included for the Vespa PK model, allowing use with both standard and shortened forks, and they fit both drum and disc brakes.
Cylinder Gasket Kit BGM Pro 150cc for Vespa 125 VM1>2T/VN1>2T-150 VL1>3T/VB1T
Vespa 125 VM1>2T/VN1>2T-150 VL1>3T/VB1T
Cylinder Base BGM Original for Vespa 125 VM1>2T/VN1>2T-150 VL1>3T/VB1T
BGM PRO SC/R1 SPORT Shock Absorber in Black/Silver, 385 mm complete for Vespa 125 VN1T 6001>/VN2T-VL1>3T-GS150 VS1>5T
Vespa 125 VM1>2T
Vespa 125 VN1T
Vespa 125 VN2T
Vespa 150 VL1>3T
Vespa 150 VB1T
Vespa 150 GS VS1>4T
Vespa 150 GS VS5T Export models
Adaptable Vespa 150 GS VS5T
The BGM Pro SC SPORT shock absorber is designed for Vespa with a wide frame, such as the VM, VN, VB, VL, and GS150 models. It is a sporty, comfortable, and adjustable product, with TÜV certification. The spring preload is continuously adjustable, and the shock absorber is pre-configured at the factory.
Suitable as a direct replacement for models from 1955 to 1954 inclusive, the spring and shock absorber are separate. For later models, an upper shock absorber mount is available, sold separately, allowing use on vehicles prior to 1955. Two screw adapters (M8 and M9) specific to each model are included. The shock absorber is adjustable in length between 385 and 420 mm.
Made of high-strength aluminum and CNC machined, it has hard anodized surfaces for optimal protection and long durability. Its sporty and harmonious design ensures excellent road performance. The suspension reduces dive during braking and roll during acceleration, improving handling and stability.
The shock absorber has a KBA and ABE test mark, with a very competitive price/quality ratio. The technology used comes from the BGM Pro SC COMPETITION shock absorber, with an anodized body and
Tapered roller fork bearing set BGM for Vespa 50-125/PV/ET3/PK50-125/S/SS/XL/125 GT-TS/150 Sprint/V/Super/160 GS/180 SS/Rally/PX80-200/PE/Lusso/'98/MY/'11/T5/Cosa
Vespa 50-125/PV/ET3/PK50-125/S/SS/XL/125 GT-TS/150 Sprint/V/Super/160 GS/180 SS/Rally/PX80-200/PE/Lusso/'98/MY/'11/T5/Cosa
Tapered roller bearings have a larger support surface and are therefore much more loadable compared to traditional factory solutions with ball bearings. Tapered roller bearings are much better able to withstand the high loads of powerful braking systems and are also much more wear-resistant.
They increase active driving safety by ensuring the ideal condition of a smooth and non-blocking steering for a very long time. A criterion that will become evident at the latest with the next TÜV inspection.
NOTE: The upper BGM tapered roller bearing is superior to the original one. Therefore, it is not possible to use a locknut to prevent rotation as with the original bearing. For locking, the thread is designed to be self-locking, meaning it is cut tighter and can thus be tightened more securely than an original piece. Additionally, screw locking can be used. Then adjust the bearing play and position the steering tube on the upper bearing ring so that no gap is visible between the two.
Front shock absorber -BGM PRO TOURING for Vespa 125 V30-33/VM/VN/ACMA/Hoffmann C/VNA-TS/150 VL/VB1/VD/VGLA/B/VGL1/GS/VBA-Super/Rally/
Vespa 125 V30T > V33T (adaptable)
All models from '53 to '79
Excluding 125 Primavera ET3,PK;PX,PE
Black center stand BGM PRO Soft Stop System for Vespa 125/150/160/180/200 VNB-GT-GL-TS-Sprint-VBB-SS-Rally-GS
Vespa 125/150/160/180/200 VNB-GT-GL-TS-Sprint-VBB-SS-Rally-GS
Thanks to the BGM PRO central stand soft stop system, the stand's feet
will no longer hit the footboard of your Vespa.
As
with the Vespa PX models, the stand stop is now positioned
on the stable mounting brackets located on the central tunnel. The central stand is locked in the right place without causing the footboard to vibrate.
Closing the stand will be less noisy and the frame will be less
subject to impacts or damage as it used to happen with the
original central stand.
The Soft Stop central stand
comes with the respective brackets that have additional
plates on which the stand is positioned. These plates
prevent direct contact between the stand tube and the frame
ensuring the latter remains intact. The original central stand, however, used to scratch the footboard's paint.
Pair of Engine Crossbar Buffers, right and left for Vespa 125/150 TS-GT-GTR-VNA-VNB-VBB-VBA-GL-PX
Vespa 125 VNA1>2T
Vespa 125 VNB1>6T
Vespa 125 GT VNL2T
Vespa 125 GTR VNL2T
Vespa 125 TS VNL3T
Vespa 125 Super
Vespa 150 VBA1T
Vespa 150 VBB1>2T
Vespa 150 Super VBC1T
Vespa 150 GL VLA1T
Vespa 150 Sprint VLB1T
Vespa 150 Sprint Veloce VLB1T
Vespa 125 PX First series
Vespa 150 PX First series
Reinforced silent blocks for greater driving stability, mount dry (at most using talcum powder to help).
WARNING-->Directional silent blocks, must be mounted according to the direction of travel
in the following manner: Left direction of travel: red mark,
right direction of travel: green mark.
Complete 7-wire stator for Vespa 125/150/200 PX Arcobaleno with electric start
Vespa 125/150/200/PX Arcobaleno With electric start
7-wire stator composed of: 4-Wire Round Connector: Yellow, Black, Red, Grey; 3 wires in color: Green, White, Red
Pair of silent block BGM Pro engine crossbar - SOFT- for Vespa PX200/Rally 200 (VSE1T) (2nd series)
Vespa 125 PX T5 VNX5T
Vespa PX rainbow series
Vespa 200 Rally 0040654 >
Vespa 200 PE VSX1T
Reinforced silent blocks for greater driving stability, mount dry (at most using talcum powder to help).
WARNING--> Directional silent blocks must be mounted according to the direction of travel in the following way: Left direction of travel: red mark, Right direction of travel: green mark.
BGM Pro base gasket thickness 1.5 mm bgm 177/187 for Vespa PX125/PX150/Cosa125/Cosa150/GTR125/TS/Sprint Veloce (VLB1T 0150001>)
Vespa PX125/PX150/Cosa125/Cosa150/GTR125/TS/Sprint Veloce (VLB1T 0150001-)
Rear shock absorber adapter -BGM PRO R1, R12, BGM7782, BGM7742 - Vespa PX, V50, PV, ET3 -
Vespa PX, V50, PV, ET3
The adapter is securely screwed to the shock absorber and secured against loosening with the screw lock. The lower M16x1 thread fits all rear shock absorbers bgm Pro of the R1 and R12 series. The upper M9 thread is screwed directly to the shock absorber with a suitable spacer or to the silent block.
All models
BGM Pro base gasket thickness 1.5 mm 177 DR for Vespa PX125/PX150/Cosa125/Cosa150/GTR125/TS/Sprint Veloce (VLB1T 0150001>)
Vespa PX125/PX150/Cosa125/Cosa150/GTR125/TS/Sprint Veloce (VLB1T 0150001-)
Complete transmission kit for Lambretta LI, LIS, SX, TV (series 2-3)
Lambretta LI, LIS, SX, TV (series 2-3)
Vespa 50/90/125/150/160/180/200
All models
Engine Gasket KIT -BGM Pro silicone- including o-rings for Vespa 50/90/125 Primavera ET3-Special
Vespa 50 V5A1T N,L,R
Vespa 50 Special V5A2>3T
Vespa 50 Special V5B1>4T
Vespa 90 V9A1T
Vespa 125 Primavera VMA1T>2T
Vespa 125 Primavera ET3 VMB1T
Vespa 125 PK ETS
Front shock absorber BGM Pro SC /F16 competition in black color for Vespa 80/125/150/200 PX-PE-LML
Vespa 80 PX
Vespa 125 PX
Vespa 150 PX
Vespa 200 PE
Vespa Arcobaleno
With the Sport and Competition line, BGM Pro offers two series of high-quality shock absorbers in its product range. Both share perfect workmanship, high-quality materials, and ABE approval. The shock absorbers are very lightweight despite their high load capacity because they are made of high-strength CNC aluminum and have an exceptional hard anodized surface protection. The front shock absorbers are 15 mm shorter than standard shock absorbers, thus lowering the front of the vehicle. This benefits driving stability, top speed, and, not least, the aesthetic appearance. Additionally, the swing arm angle is reduced, which improves the damper response. The resulting larger wheel stabilizes handling at higher speeds.
Height--> 240 mm
Bearing and oil seal kit for crankshaft -BGM ORIGINAL- Piaggio 125-180cc 2-stroke
Piaggio 125-180cc 2-stroke
Thermal group -BGM ORIGINAL 200 cc 12HP- Vespa Rally 200 (VSE1T), P200E (VSX1T), PX200, PX200E, PX200E Elestart, PX200E
Vespa 200 Rally VSE1T
Vespa 200 PE VSX1T
Vespa 200 Cosa VSR1>2T
The BGM 200cc cylinder is an improved version of the already reliable and powerful original cylinder. Suitable for 200cc engines of the Rally200, PX200, Cosa200, and the Spanish models DS/DN/TX/Iris, the BGM cylinder offers an additional advantage in terms of safety and performance thanks to an exact honing of 9/100 operating distance and slightly larger transfer ports. This makes it slightly more powerful and more fuel-efficient compared to the original.
The original head can be used, ready for installation with pistons, clips, piston pins, and base gasket.
BGM Pro QUATTRINI M1XL / M1X base gasket thickness for Vespa PX125/PX150/Cosa125/Cosa150/GTR125/TS/Sprint Veloce (VLB1T 0150001>)
Vespa PX125/PX150/Cosa125/Cosa150/GTR125/TS/Sprint Veloce (VLB1T 0150001-)
BGM ORIGINAL clutch disc kit (4 discs) for Vespa PX125-200 E Lusso `95-`98/MY/`11/Cosa 2
Vespa 125 Cosa VNR1T
Vespa 150 Cosa 2 VLR1T
Vespa 200 Cosa 2 VSR1T
Vespa 125 PX 2011 ZAPM74100
Vespa 150 PX 2011 ZAPM74200
Vespa 125 PX VNX1T Millennium
Vespa 150 PX VLX1T Millennium
Clutch Basket Gear BGM Superstrong, Superstrong CR Z24 - 62 Straight Teeth for Vespa PX200 E Lusso '95->/'98/MY/Cosa 2 200
Vespa 200 Cosa VSR1T
Vespa 200 PE VSX1T 1995>
Ø 42 mm
helical 22 teeth
for the primary 65 teeth
clutch: Ø 115mm
BGM PRO BigBox SPORT V2 (BBS2) Exhaust for Vespa 200 Rally/P200E/PX200 E/Lusso/'98/MY/Cosa 200
Vespa 200 PX-PE
BGM BigBox Sport V2 for Vespa PX200
Performance like a racing exhaust - appearance like a stock exhaust
The BGM BigBox Sport V2 is a purebred racing exhaust for Vespa, in the unsuspecting design of an original exhaust. It stands as a clear alternative to large and flashy resonance exhaust systems. The high level of performance clearly distinguishes the BBS2 from other exhaust systems. Designed for performance-oriented drivers who appreciate the benefits of a low-profile vehicle.
NEW BBS V2
The basic concept has been maintained and only adapted to the greater requirements due to the increased power and engine displacement. The BGM BBS2 (=Big Box Sport V2) has widened pipe sections both inside the box and in the exhaust area. This effectively prevents the power fade that often occurs with very powerful engines (over 30 HP).
Additionally, the often-criticized ground clearance of the manifold has been modified. The system is now fully suitable for daily use and has the same ground clearance as a comparable resonance exhaust. Like the Big Box Touring V2, the BBS2 is now also equipped with a connection between the manifold and the exhaust body.
REQUIREMENTS
Cylinder base spacer -BGM ORIGINAL Malossi 210 / Polini 207, Polini 210, Polini 221 / Pinasco 213, Pinasco 225 / Original 200 for Vespa Vespa Rally200, PX200, Cosa200
Vespa 200 Rally VSE1T
Vespa 200 PE VSX1T
Vespa 200 Cosa VSR1>2T
Vespa 200 PE VSX1T Millennium '98
BGM Pro clutch bush for Vespa PX, T5 125cc, Cosa, Rally, TS, Sprint, GT, GTR, SS180, GS160 / GS4, GL, Super, VNA, VNB, VBA, VBB
Vespa 125 (Excluding primavera ET3)
Vespa 150
Vespa 160
Vespa 180
Vespa 200
All models / All Models
High-quality material ensures a very smooth sliding operation in all conditions.
Central stand galvanized BGM PRO Soft Stop System for Vespa 125/150/160/180/200 VNB-GT-GL-TS-Sprint-VBB-SS-Rally-GS
Vespa 125/150/160/180/200 VNB-GT-GL-TS-Sprint-VBB-SS-Rally-GS
Thanks to the soft stop system of the BGM PRO center stand, the feet
of the stand will no longer hit against the footboard of your Vespa.
As
with Vespa PX models, the stand stop is now positioned
on the stable mounting brackets located on the central tunnel. The center stand is locked at the right point without vibrating the footboard.
Closing the stand will be less noisy and the frame will be less
subject to impacts or damage as was the case with the
original center stand.
The Soft Stop center stand
comes with the respective brackets that have additional
plates on which the stand is positioned. These plates
prevent direct contact between the stand tube and the frame
ensuring the latter remains intact. The original center stand, however, scratched the paint of the footboard.
Vespa 125 Primavera VMA1T>2T
Vespa 125 Primavera ET3 VMB1T
Vespa 125 PK S/XL/N/HP
20 mm cone, 54 mm stroke, 105 mm connecting rod, additional holes on the connecting rod head improve lubrication.