RDV Scootershop
RDV > Yes/Hello/Well done > Frame > Luggage rack > Front chrome luggage rack MOTO NOSTRA v2.0 for Piaggio Ciao
Front chrome luggage rack MOTO NOSTRA v2.0 for Piaggio Ciao
Available
10-CW-095-SC

Front chrome luggage rack MOTO NOSTRA v2.0 for Piaggio Ciao

Original reference: MN4505C

technical specifications

New improved edition of the luggage rack for Piaggio Ciao moped and motorbike models. The opening angle of the luggage rack has been increased by about 10 degrees and is now almost 90 degrees relative to the rear. We have also considered the issue of luggage and fuel cans and have added a second support to this luggage rack to ensure nothing is lost.

The luggage racks fit all Ciao models that have the side attachment for the mudguard on the inside of the fork. They fit all 2.00" and 2.25" tires. The original M6x12 bolts must be replaced with M6x16 bolts (Art-3333891).

Available in matte black and chrome.

Shipping time:

24/48 hours

1 point RDV = 2 cents 102 points RDV = 2,04 € cashback
102,48 €
84,00 € VAT excluded
Compatibility

Piaggio Ciao

Models
Models ciao
Piaggio Ciao
Request information

Do you have any questions? Request more information from the staff

I have read and accept the use of my data according to the disclosure of privacy. Read Privacy Policy.
accept
Fields with an * (asterisk) are required

Related articles

-20% SKF crankshaft bearing (15x35x11 C4)
low availability
low availability
07-BI-041-PO
07-BI-041-PO

SKF crankshaft bearing (15x35x11 C4)

Compatibility

Piaggio Ciao, Yes, Bravo

Approfondisci
5,23 € 6,54 €
4,29 € VAT excluded
1 point RDV = 2 cents 5 points RDV = 0,10 € cashback
-20% Malossi BIG DEPS Ø47 aluminum thermal group with Ø12 pin for Piaggio Ciao-CiaoPX
Available
Compatibility

Hello/Hello PX

technical specifications

The only cylinders on the market for CIAO/SI with split exhaust and symmetrical transfers!
The exhaust fitting is screwed on and offers two great advantages: Extreme resistance and the possibility of replacement in case of breakage Possibility to enlarge the exhaust outlet, further increasing performance These results have been made possible by the decompression valve provided in the kit, which is smaller than the original Piaggio one.
The most important innovation is represented by the completely redesigned internal transfer system, specifically studied to achieve cylinder washing while maximizing power at the correct usage regime.

Attention: On original Piaggio crankcases, it is necessary to bore.

Approfondisci
Shipping time
24/48 hours
332,46 € 415,57 €
272,50 € VAT excluded
1 point RDV = 2 cents 332 points RDV = 6,64 € cashback
-10% LED conversion kit without battery for Piaggio Ciao-SI-Bravo
low availability
low availability
06-CB-086-IR
06-CB-086-IR

LED conversion kit without battery for Piaggio Ciao-SI-Bravo

Compatibility

Piaggio Ciao-SI-Bravo

technical specifications

LED conversion kit for Piaggio moped, consisting of:

LED position lights;
LED high beam bulb.
The product is perfectly compatible with both point ignition and electronic ignition, and does not require structural modifications to the headlights.

The installation is carried out using the original wiring, and includes fully reversible modifications, described in the instruction manual provided with the kit.


The same kit, although in a less advanced version, was installed on "Lello," the moped used by Henry Favre to complete the "Italy in Ciao" journey in 2016.

Approfondisci
86,40 € 96,00 €
70,82 € VAT excluded
1 point RDV = 2 cents 86 points RDV = 1,72 € cashback
Flywheel side oil seal for Piaggio Ciao Bravo SI
low availability
low availability
07-CL-080-CI
07-CL-080-CI

Flywheel side oil seal for Piaggio Ciao Bravo SI

Compatibility

Piaggio Ciao, Yes, Bravo

technical specifications

Note--> For models WITHOUT variator

Orig.Ref 112968

Approfondisci
2,00 €
1,64 € VAT excluded
1 point RDV = 2 cents 2 points RDV = 0,04 € cashback