Workshop equipment
360° Rotating Engine Support for Bench Mounting/Dismounting Piaggio Ciao/Si/Bravo/Boxer
Piaggio Ciao/Si/Bravo/boxer/Grillo
ABUS "305 YELLOW" disc lock anti-theft hook for all models with disc brakes
All models with disc brakes
The automatic closure is easy to use and makes daily use pleasant:
simply press the large automatic button and the scooter is
secure. The two reversible keys included also contribute
to increased convenience. And to prevent dirt and corrosion
from quickly damaging the lock, we have integrated a manual
cover.
ABUS "305 RED" disc lock anti-theft hook for all models with disc brakes
All models with disc brake
The automatic closure is easy to use and makes daily use enjoyable: just press the large automatic button and the scooter is secure. The two reversible keys included also contribute to increased convenience. And to prevent dirt and corrosion from quickly damaging the lock, we have integrated a manual cover.
Series of roller tools for mounting edge shield for all models with Aluminum edge
All Models
Second roller for edges with larger dimensions / Second roller for edges with larger
for our code: 10-FQ-004-CI
Replacement weights for extractor 07-FQ-055-IR flywheel side bearing ring also suitable for Vespa 160 GS/180 SS/180-200 Rally 1°
Vespa 160 GS/180 SS/180-200 Rally 1st
All models
The ignition timing is important for the thermal health of the
engine and for delivering all the power. If the
engine is rebuilt, you should not rely on existing marks for
ignition adjustment, but measure it personally. This is
easily possible with this electronic timing gun for
gasoline engines with contact or transistor ignition system
(CDI ignition as in series with ET3, PK, PX, PX, Cosa, T5, etc.) The 6 and 12 volt ignitions can be adjusted at both 6 and 12 volts. Note:
It doesn't matter if the ignition is 6V or 12V, an external 12 Volt power source (e.g., a car battery) is always needed if the
vehicle doesn't already have one.
A super bright xenon tube and a special converging lens ensure optimal visibility of fixed markers even at speeds over 8000 rpm in the near field.
The gun is connected to a 12 volt battery via the alligator clips and the inductive clip on the spark plug cable (without direct contact with the wire)
Clutch Group Extractor Tool for Vespa 50/90/125/Primavera//ET3/PK50-125/S/XL/XL2
Vespa 50 V5A1T N,L,R
Vespa 90 V9A1T
Vespa 125 Primavera VMA1T>2T
Vespa 125 Primavera ET3 VMB1T
Vespa PK
All Vespa models
universal, 360° swivel, minimum height: 13cm, maximum: 43cm empty weight: 34kg, load: 400kg
Flywheel puller tool M28x1 for Vespa 50-125/PV/ET3/PK50-125/S/XL/XL2/125 GT-TS/150 GL-Super/200 Rally/PX80-200/PE/Lusso/'98/MY/'11/T5/Cosa
Vespa 50
Vespa 50 PK
Vespa 125 PK/S/XL/
Vespa 125 ET3
Vespa 125 GT/TS
Vespa 150 GL/Super
Vespa 180/200 Rally
Vespa PX/PE/T5/Cosa
Size: 28x1
All models
The ignition timing is important for the thermal health of the
engine and for delivering full power. If you rebuild the
engine, you should not rely on existing marks for
ignition adjustment, but measure it personally. This is
easily possible with this electronic timing gun for
gasoline engines with contact or transistor ignition system
(CDI ignition as in series with ET3, PK, PX, PX, Cosa, T5 etc.) 6 and 12-volt ignitions can be adjusted at both 6 and 12 volts. Note:
It doesn't matter if the ignition is 6V or 12V, an external 12-volt power source (e.g. a car battery) is always needed if the
vehicle doesn't already have one.
A super bright xenon tube and a special converging lens ensure optimal visibility of the fixed markers even at speeds over 8000 rpm in the near field.
The gun is connected to a 12-volt battery via the crocodile clips and the inductive clip on the spark plug cable (without direct contact
with the wire)
Crankshaft disassembly tool clutch side Vespa 50 N/L/R- Special-125/PV/ET3/PK50-125/S/SS/XL/XL2
Vespa 50 N/L/R- Special-125/PV/ET3/PK50-125/S/SS/XL/XL2
Vespa 50/90/125/160/180/200
ABUS "uGrip BORDO 5700" folding lock in lime color for all models with disc brakes
5 mm steel bars
Colors matched to the closure body
(only "core" colors) The bars are connected with special rivets Automatic Premium Cylinder
The "convenient transport mode" (CTM) system allows for immediate use of the device (only on 5700/100)
All models
The ignition timing is important for the thermal health of the
engine and for delivering full power. If you rebuild the
engine, you should not rely on existing marks for ignition
adjustment, but measure it personally. This is
easily possible with this electronic timing gun for
gasoline engines with contact or transistor ignition system
(CDI ignition as in series with ET3, PK, PX, PX, Cosa, T5, etc.) The 6 and 12 volt ignitions can be adjusted at both 6 and 12 volts. Note:
It doesn't matter if the ignition is 6V or 12V, an external 12 Volt power source is always required (e.g. a car battery) if the
vehicle doesn't already have one.
A super bright xenon tube and a special converging lens ensure optimal visibility of the fixed markers even at speeds above 8000 rpm in the near field.
The gun is connected to a 12-volt battery via the crocodile clips and the inductive clip on the spark plug wire (without direct contact with the wire)
SIP Steering Lock Assembly/Disassembly Tool for Vespa 125 V1-15/V30-33/VM/VN/VNA/VNB/ACMA/Hofmann/150 VL/VB/GS/T1-4/VBA/VBB
Vespa 125 V1-15/V30-33/VM/VN/VNA/VNB/ACMA/Hofmann/150 VL/VB/GS/T1-4/VBA/VBB
Liquid silicone gasket, resistant to glycol. Ideal for flexible flanges. Machined surfaces, metal or plastics. • The product withstands water and glycol mixtures. • Excellent for components with high torque capacity. • Enhanced formula with oil resistance and excellent adhesion. • 8 times more flexible than cork and/or composite gaskets and 3 times more resistant to oils than conventional silicone gaskets. • Operating temperature: -54°C to 260°C • Non-corrosive to sensors present in the engine (such as Lambda and others). • Low odor. Dries in 40 minutes.
O-ring and various dismantling tip tool kit for all models
All Vespa models
Different inclinations
Piaggio YES-HELLO-Bravo-Cricket
M17 x 1mm
Medium strength threadlocker "LOCTITE 243" locks nuts, screws, bolts, studs (10ml)
All models
SIP Extractor Tool for flywheel side gearbox shaft bearing for Vespa 50/90/125/Primavera//ET3/PK50-125/S/XL/XL2
Vespa 50 V5A1T N,L,R
Vespa 90 V9A1T
Vespa 125 Primavera VMA1T>2T
Vespa 125 Primavera ET3 VMB1T
Vespa PK
Except Vespa 50 N 1963/64 (small door)
Vespa 50/90/125/160/180/200
Vespa 160 GS VSB1T
Vespa 180 SS VSC1T
Hub nut removal tool for 125 VNA/VNB/GT/GTR-150 VBA/VBB/GL/Sprint/S.Veloce/Rally
Vespa 125 Super VNC1T
Vespa 125 VNA1>2T
Vespa 125 VNB1>6T
Vespa 125 GT VNL2T> 76107
Vespa 125 GTR VNL2T> 118278
Vespa 150 Super VBC1T
Vespa 150 VBA1T
Vespa 150 VBB1>2T
Vespa 150 GL VLA1T
Vespa 150 Sprint VLB1T >1151814
Vespa 150 Sprint V. VLB1T> 0165002
Vespa 180 Rally VSD1T
High-quality tool, redesigned by our staff to make it more resistant, the teeth of each individual piece have been hardened and subsequently burnished.
All Vespa models
for threading M3 - M18
All Models
Second roller for edges with larger dimensions / Second roller for edges with larger
Professional tool. / Professional tool
Replacement weights for extractor 07-FQ-055-IR flywheel side bearing 20x47x14 mm for Vespa 50 2°/N/L/R/S 2°/Special/SR/SS/PK50/S/SS/XL/XL2/Ape 50
Vespa 50 2°/N/L/R/S 2°/Special/SR/SS/PK50/S/SS/XL/XL2/Ape 50
For bearing dimensions: 20x47x14 mm
Gear shaft disassembly tool for Vespa 50-125/PV/ET3/PK50-125/S/XL/XL2
Vespa 50-125/PV/ET3/PK50-125/S/XL/XL2
Specific product to remove oxidation and pitting from all chrome surfaces
Specific product to remove oxidation and pitting from all chrome surfaces
Engine stud removal tool set for Vespa 90/125/150/180/200 all models
All models
Measurements in the kit:
M6x1.0 mm/M7x1.0 mm/M8x1.25 mm
Piaggio Vespa
Bottle 300 ml
Clutch ring disassembly tool for Vespa 125 V1-TS/150 VL-Super/160 GS/180 SS/Rally/PX80-200/PE/Lusso -> 1994/Cosa 1/T5
vespa 125
vespa 150
Vespa 160
Vespa 180
Vespa 200
All except 125 primavera -ET3
900 gr net
Brown
BARRDAHL - Cleaner, detergent, degreaser, deoxidizes, protects electrical contacts Electrical Contact Cleaner 500
All models
Particularly effective for cleaning electrical and electronic equipment
All models
• With rotating magnetic clip.
• Excellent lighting.
• Low energy consumption.
• Long lifespan.
• Batteries (not included): 3 x AAA
• Battery life: ± 6 h
• Light source: 1W Cob + 1 Led
• Brightness: 100 lm
• Light temperature: 6000° K
• Protection class: IP 44
Multi-purpose Lithium Grease BARDAHL M.P.G. MPG NLGI (250ml package)
500g