Spare Parts Vespa 50 Sprinter V5SS2T
An exclusive selection of spare parts for Vespa 50 Sprinter (chassis V5SS2T), the rare "fast" version produced in the '70s for the foreign market. Here you will find the hard-to-find components for this collector's model: from the iconic "Sprinter" adhesive stripes for the shield and sides, to the specific thermal group that made it faster than the standard 50. Rely on our catalog for a faithful restoration of this piece of Vespa history.
Titel Oil 0.25 lt - Solvent-based rust-blocking oil, ideal for the conservative restoration of vintage cars and motorcycles.
All models
It does not remove rust but blocks it, forming a transparent wet-look film that prevents its proliferation.
Can be overpainted. Apply two coats at intervals of 24-48 hours in thin layers.
It may create a slightly yellowing effect on white paints, which is why it is useful to perform a test to verify the stability of the original color.
Measurements: 8x30 mm
Starter lever tie rod kit with mounting bracket for Vespa 50-Special-Primavera ET3-Vespa 125/150/180/200 Sprint V-PX-TS-GT-GTR-Rally
All models
All models/All Models
Manual pump - manual fuel pump (canister pump) -HÜNERSDORFF- with transparent hose (1450mm) shut-off valve for engine testing
All models
Manual pump - manual fuel pump (canister pump) with PVC hose (1450 mm) and stopcock for decanting and suction of various fluids
consists of suction pump (LD-PE), stopcock (HD-PE) and flexible hose (PVC)
resistant to food, acids, chemicals, and gasoline
Length = 1,450 mm
Discharge rate 4 L/min
Adjustable shoulder strap with sliding buckle
Measurements: 25x21x7 cm
Vespa 50/90/125/150/180/200
Total length: 120mm
a=90 mm
Ø 92 mm
steel sheet, enameled
green/white/red
a=80 mm
Ø 80 mm
steel sheet, enameled
blue/white/red
l=400.0mm
a=400.0mm
round
l=600 mm
l=400 mm
metal
green/white/red
l=200 mm
l=300 mm
metal
brown
UNISEX
black/grey
80% cotton, 17% polyamide, 3% elastane
UNISEX
black/grey
80% cotton, 17% polyamide, 3% elastane
UNISEX
black/grey
80% cotton, 17% polyamide, 3% elastane
All models
l=700 mm
l=500 mm
100% cotton
All models
l=700 mm
l=500 mm
100% cotton
All models
l=700 mm
l=500 mm
100% cotton
All models
l=500 mm
l=700 mm
100% cotton
turquoise
To celebrate the 75th anniversary of Vespa, LEGO designers have
worked closely with the engineers of the lifestyle brand to
provide adults with an engaging building project that faithfully recreates
the scooter and creates a spectacular model.
AF Parts shock absorber mount, rear, upper for Vespa 50-125/PV/ET3
Vespa 50 V5A1T N,L,R
Vespa 50 Special V5A2>3T
Vespa 50 Special V5B1>4T
Vespa 90 V9A1T
Vespa 125 Primavera VMA1T>2T
Vespa 125 Primavera ET3 VMB1T
Vespa 50 PK/S/XL
CNC machining, hard black anodizing, laser engraving 4 positions for adjustable setting!
All inclusive: comes with M9 unibal that replaces the original silent block
Only one additional hole to be made: drill map on the side of the package
Compatible with all standard M9 spacers (extensions)
Mounted in 15 minutes!
SIP clutch/brake sport lever set left and right for Vespa 50-125/PV/ET3/PK/S/XL/125 VNA–TS/150VBA-T4/160 GS/180 SS/Rally/PX80-200/PE/Lusso
Vespa 50-125/PV/ET3/PK/S/XL/125 VNA–TS/150VBA-T4/160 GS/180 SS/Rally/PX80-200/PE/Lusso
aluminum
polished
pointed, adaptable
2 pieces
SIP sport clutch/brake lever set left and right for Vespa 50-125/PV/ET3/PK/S/XL/125 VNA–TS/150 VBA-T4/160 GS/180 SS/Rally/PX80-200/PE/Lusso
Vespa 50-125/PV/ET3/PK/S/XL/125 VNA–TS/150VBA-T4/160 GS/180 SS/Rally/PX80-200/PE/Lusso
SIP clutch/brake sports lever set left and right for Vespa 50-125/PV/ET3/PK/S/XL/125 VNA–TS/150VBA-T4/160 GS/180 SS/Rally/PX80-200/PE/Lusso
Vespa 50-125/PV/ET3/PK/S/XL/125 VNA–TS/150VBA-T4/160 GS/180 SS/Rally/PX80-200/PE/Lusso
Vespa 50/90/125/150/160/180/200
with lever (l=200mm)
with reserve
Adjustable shoulder strap with sliding buckle
Size: 25x21x7 cm
Carburetors SHB/PHVA/PHVB
Vespa 50/90/125
For SHB-SHBC carburetors
For tires 3.00x10, 3.50/10
Open black spare wheel cover (10 inches) for Vespa 50/125/150 Special-GT-GTR-Sprint-GL
For tires 3.00x10, 3.50/10
Spare wheel cover leather color (10 inches) for Vespa 50/125/150/180/200 Special-Primavera-PK-PX-GT-GTR-GL-Rally-SS
For tires 3.00x10, 3.50/10
Size: 110x50cm (check the size before purchasing)
Size: 120x90cm (check the size before purchasing)
Spare wheel cover in blue jeans color (10 inches) for Vespa 50/125/150/180/200 Special-Primavera-PK-PX-GT-GTR-GL-Rally-SS
For tires 3.00x10, 3.50/10
Attachment diameter 65, total length 60, sponge length 45, sponge diameter 105.
Heat shrink tubing set -BWM 100 pieces- black - Ø=1.5mm, 2.5mm, 4.0mm, 6.0mm, 10mm, 13mm
All models
Vespa 50/90/125/150/160/180/200
Adaptable
hole distance 23mm, incl. screws and nuts
Chrome central stand BGM- Pro soft stop system for Vespa 50 R/Special/SS/90/125 Primavera ET3
Vespa 50 R V5A1T
Vespa 50 Special
Vespa 50 Special Elestart
Vespa 125 Primavera VMA2T
Vespa 125 Primavera ET3 VMB1T
Thanks to the soft stop system of the BGM PRO central stand, the feet
of the stand will no longer hit against your Vespa's footboard.
As
with the Vespa PX models, the stop of the stand is now positioned
on the stable mounting brackets present on the central tunnel. The central stand is locked at the right point without making the footboard vibrate.
Closing the stand will be less noisy and the frame will be less
subject to impacts or damage as it used to happen with the
original central stand.
The Soft Stop central stand
comes with the respective brackets that have additional
plates on which the stand is positioned. These plates
prevent direct contact between the stand tube and the frame
ensuring that the latter remains intact. The original central stand, on the other hand, scratched the paint of the footboard.