Vespa 200
BGM tubeless aluminum rim in aluminum gray color 2.10/10 for Vespa 50-125/PV/ET3/PK/S/XL /XL2/125 GT-TS/150 GL/GS VS5T/Sprint/V/T4/Rally/PX/PE /Lusso/T5/LML Star/DLX /Deluxe 2T/4T
Vespa 50/80/90/125/150/160/180/200
Size--> 2.10-10" with pre-installed valve
WEIGHT REDUCTION The weight saving compared to an original PX steel rim is 600 grams. Additionally, there is a weight saving of about 370 grams due to the tube no longer being necessary. The unsprung masses are thus reduced by almost a kilogram per axle (over 64%). The frame's response behavior improves significantly.
SAFETY
Due to a so-called double "hump" in the rim well, the tire is always safely guided in the rim. Similar to the latest runflat technology in the automotive sector, if a foreign object (nail or similar) is pushed into the rim, the air can slowly escape without the tire slipping into the rim well. The vehicle stops in a controlled manner. The rim has recesses between the screw points. Brake cooling is improved.
SPECIAL FEATURES The track offset is 2.5 millimeters on the left side. Mounting the aluminum rims on both axles equalizes the track offset. This is not noticeable during driving. The rim does not have a test mark and is not street legal.
Only for tubeless tires (TL
Original DUCATI magnet flywheel cam without rivets for Vespa 50/125/150/200 PE- PK XL- Cosa
Vespa PX
Vespa PE
Vespa PK XL
Vespa Cosa
Original Ducati cone for crankshafts with large cone (Vespa PK XL, PX, Cosa).
Used product
Original Piaggio magnet flywheel (nos) 2750 g for Vespa 125/150/200 PE
Vespa PX
Vespa PE
Weight: 3kg
Original Piaggio stock, may present imperfections due to time.
SIP Touren 2.0 magneto flywheel (2.3 kg) for Vespa PK50-125/S/XL/XL2/ETS/125 GTR 2°/TS 2°/150 Sprint V 2°/200 Rally 2°/PX80/125/150/200/PE/Cosa
Vespa PX
Vespa PE
Vespa PK
Suitable for stators with electronic ignition
Inner diameter: 94 mm
Weight: 2.3kg
Double keyway for different timing
Original type magnetic flywheel weighing 2.4 kg for Vespa 125/150/200 PX-PE-Arcobaleno
Vespa PX
Vespa PE
Suitable for stators with electronic ignition
Inner diameter: 94 mm
Weight: 2.4 Kg
Vespa P 125 X VNX1T 146314>
Vespa PX 125 E VNX2T 232053>
Vespa 125 T5 VNX5T
Vespa 125 PX ZAPM74100
Vespa 125 PX Cat ZAPM50100
Vespa P 150 X VLX1T 264565>
Vespa 180 Rally VSD1T
Vespa 200 Rally VSE1T
Vespa P 200 E VSX1T
Vespa 125/150/200 Cosa
Measurements: Diam. 117.5 mm
Central section: 5.50 mm
Vespa P 125 X VNX1T 146314>
Vespa PX 125 E VNX2T 232053>
Vespa 125 T5 VNX5T
Vespa 125 PX ZAPM74100
Vespa 125 PX Cat ZAPM50100
Vespa P 150 X VLX1T 264565>
Vespa 180 Rally VSD1T
Vespa 200 Rally VSE1T
Vespa P 200 E VSX1T
Vespa 125/150/200 Cosa
Measurements: Diam. 109.5 mm
Central section: 4.88 mm
4th Gear Cog (35 teeth) Vespa PX150-200 E Lusso 2°/`98 /MY/`11/Cosa 150-200
Vespa PX 150 E VLX1T 624302 >
Vespa 150/200 Cosa
Vespa PX 200 E Arcobaleno 315267 ->
Ref. Orig 2232344
Ø 90 mm, central section: 6.43mm
Vespa P 125 X VNX1T 146314>
Vespa PX 125 E VNX2T 232053>
Vespa 125 T5 VNX5T
Vespa 125 PX ZAPM74100
Vespa 125 PX Cat ZAPM50100
Vespa P 150 X VLX1T 264565>
Vespa 180 Rally VSD1T
Vespa 200 Rally VSE1T
Vespa P 200 E VSX1T
Vespa 125/150/200 Cosa
Measurements: Diam. 109.5 mm, central section: 4.88 mm
Material--> F1
Vespa P 125 X VNX1T, Vespa PX 125 E VNX2T, Vespa P 150 X VLX1T Vespa 180 Rally VSD1T, Vespa 200 Rally VSE1T, Vespa P 200 E VSX1T
2nd Gear Pinasco Long (40 teeth) for Vespa 125/150/200 PX-PE-Sprint V-Rally-TS-GTR
Vespa 125/150/200 PX-PE-Sprint V-Rally-TS-GTR
Made of alloy steel specific for gears, the Pinasco LONG SECOND Z40 is extremely durable and quiet, allowing you to correct the spacing of the Vespa PX gearbox by bringing the 2nd closer to the 3rd gear. The absence of holes or grooves prevents oil emulsification during rotation.
The Pinasco LONG SECOND Z40 fits all existing rainbow gearboxes on the market and, combined with Pinasco clusters, optimizes the shift between gears, enhancing the driving experience.
3rd Gear (38 teeth) Vespa PX150-200 E Lusso 2°/`98 /MY/`11/Cosa 150-200
Vespa P 125 X VNX1T 146314>
Vespa PX 125 E VNX2T 232053>
Vespa 125 T5 VNX5T
Vespa 125 PX ZAPM74100
Vespa 125 PX Cat ZAPM50100
Vespa P 150 X VLX1T 264565>
Vespa 180 Rally VSD1T
Vespa 200 Rally VSE1T
Vespa P 200 E VSX1T
Vespa 125/150/200 Cosa
Ref. Orig 2232334
central section: 5.03mm, 100x48x9x5
1st Gear Change Gear (57 teeth) Vespa PX150-200 E Lusso 2°/`98 /MY/`11/Cosa 150-200
Vespa P 125 X VNX1T 146314>
Vespa PX 125 E VNX2T 232053>
Vespa 125 T5 VNX5T
Vespa 125 PX ZAPM74100
Vespa 125 PX Cat ZAPM50100
Vespa P 150 X VLX1T 264565>
Vespa 180 Rally VSD1T
Vespa 200 Rally VSE1T
Vespa P 200 E VSX1T
Vespa 125/150/200 Cosa
Ref. Orig 2232315 - 2232314
Ø 117 mm
a=11 mm
central section: 6.22mm
3rd gear Crimaz gear (38 teeth) meshes on z17 for Vespa 125/150/200 PX-PE-Sprint V-Rally-TS-GTR
Vespa 125/150/200 PX-PE-Sprint V-Rally-TS-GTR
Warning: Compatible only with flat cruise shifter
Change 12-13-17-20 / 55-40-38-36 teeth CRIMAZ with internal selector for Vespa PX125, 150, 200E, '98, MY, '11, T5, Cosa
Vespa PX125, 150, 200E, '98, MY, '11, T5, Cosa
Gearing:
12-13-17-20
55-40-38-36
1st gear Crimaz gear (55 teeth) meshes on z12 for Vespa 125/150/200 PX-PE-Sprint V-Rally-TS-GTR
Vespa 125/150/200 PX-PE-Sprint V-Rally-TS-GTR
Warning: Compatible only with flat paddle shifter
2nd gear Crimaz gear (40 teeth) meshes with z13 for Vespa 125/150/200 PX-PE-Sprint V-Rally-TS-GTR
Vespa 125/150/200 PX-PE-Sprint V-Rally-TS-GTR
Warning: Compatible only with flat paddle shifters
3rd gear Crimaz gear (37 teeth) meshes on z17 for Vespa 125/150/200 PX-PE-Sprint V-Rally-TS-GTR
Vespa 125/150/200 PX-PE-Sprint V-Rally-TS-GTR
Warning: Compatible only with flat bar shifter
4th gear Crimaz gear (35 teeth) meshes on z20-21 for Vespa 125/150/200 PX-PE-Sprint V-Rally-TS-GTR
Vespa 125/150/200 PX-PE-Sprint V-Rally-TS-GTR
Warning: Compatible only with flat paddle shifter
Vespa PX
Vespa PE
Not compatible with Arcobaleno model
Kit composed of:
- Cable grommets and engine caps (including purifier kit)
- Grips
- Frame gaskets and bellows
- Hood profile
- Central tunnel rubber mat
Quality of the rubber guaranteed for most of the kit components by ARIETE (leader in the production of rubber parts for Vespa)
Brown kickstart lever protector for Vespa 125/150/200 PX-PE Arcobaleno
Vespa PX (Rainbow)
Vespa PE (Rainbow)
Vespa 125 T5
Vespa PX (Rainbow)
Vespa PE (Rainbow)
Vespa 125 T5
Red kickstart lever protector for Vespa 125/160/200 VNB3-6T-TS/150 VBA-Super-GS-Rally
Vespa 125 VNB3T > 6T
Vespa 125 PX VNX1>2T
Vespa 125 TS VNL3T
Vespa 125 GT VNL1>2T
Vespa 125 Super VNC1T
Vespa 150 VBA1T
Vespa 150 VBB1T > VBB2T
Vespa 150 Sprint VLB1T
Vespa 150 Sprint Veloce VLB1T
Vespa 150 GL VLA1T
Vespa 160 GS VSB1T
Vespa 180 SS VSC1T
Vespa 180 Rally VSD1T
Vespa 200 Rally VSE1T
Vespa PE
Speedometer glass (in glass) for Vespa 125/150/200 PX 1st series
Vespa PX
Vespa PE
Material: Glass
Vespa PX Vespa PE
In metal
Vespa 50 PK XL V5X3T
Vespa 125 PK XL VMX6T
Vespa 125 PX Arcobaleno VNX2T 200001>
Vespa 150 PX Arcobaleno VLX1T 600001>
Vespa 200 PE Arcobaleno VSX1T 300001>
Speedometer Frame for Vespa 125 Super VNC1T/125 GT R VNL2T/125 TS VNL3T/125 Nuova VMA1T/125 Primavera VMA2T/125 Primavera ET3 VMB1T/150 Super VBC1T/150 Sprint Veloce VLB1T/180 Rally VSD1T/200 Rally VSE1T
Vespa 125 Primavera VMA1T>2T
Vespa 125 Primavera ET3 VMB1T
Vespa 125 Super VNC1T
Vespa 125 TS VNL3T
Vespa 125 GTR VNL2T
Vespa 150 Super VBC1T
Vespa 150 Sprint Veloce VLB1T
Vespa 180 Rally VSD1T
Vespa 200 Rally VSE1T
In chrome-plated metal
Speedometer gasket between glass and frame for Vespa 125/150/200 PX 1st series
Vespa PX
Vespa PE
Odometer glass for Vespa 125 Super VNC1T/125 GT R VNL2T/125 TS VNL3T/125 Nuova VMA1T/125 Primavera VMA2T/125 Primavera ET3 VMB1T/150 Super VBC1T/150 Sprint Veloce VLB1T/180 Rally VSD1T/200 Rally VSE1T
Vespa 125 Primavera VMA1T>2T
Vespa 125 Primavera ET3 VMB1T
Vespa 125 Super VNC1T
Vespa 125 TS VNL3T
Vespa 125 GTR VNL2T
Vespa 150 Super VBC1T
Vespa 150 Sprint Veloce VLB1T
Vespa 180 Rally VSD1T
Vespa 200 Rally VSE1T
Material: Plastic
Notes: Compatible with metal odometer box.
Odometer glass for Vespa 50 PK XL-125/150/200 PX Arcobaleno-Millenium
Vespa 50 PK XL V5X3T
Vespa 125 PX Arcobaleno VNX2T 200001>
Vespa 150 PX Arcobaleno VLX1T 600001>
Vespa 200 PE Arcobaleno VSX1T 300001>
Material: Plastic
Diameter: 100mm
Speedometer glass (in plastic) for Vespa 125/150/200 PX 1st series
Vespa PX
Vespa PE
Material: Plastic
Vespa PX Vespa PE
In metal, black color
Vespa 50 PK XL V5X3T
Vespa 125 PK XL VMX6T
Vespa 125 PX Arcobaleno VNX2T 200001>
Vespa 150 PX Arcobaleno VLX1T 600001>
Vespa 200 PE Arcobaleno VSX1T 300001>
In metal, black color
Original, Veglia Borletti warehouse stock
Odometer dial for Vespa 125 ET3/GTR/TS/150 Sprint V/Rally
Vespa 125 GTR VNL2T
Vespa 125 TS VNL3T
Vespa 150 Sprint Veloce VLB1T
Vespa 180 Rally VSD1T
Vespa 200 Rally VSE1T
Black background, scaled to 120 KM/H, Marked Veglia Borletti
Decorative plastic frame speedometer SIP for Vespa 125/200/300 GTS-GT-GTS Super
Vespa 125/150/300 GTS-GTS Super from 2014
All models
Front shock absorber HITECH CARBONE "HTR" Gas Oleopneumatic multi-adjustable Black Edition version for Vespa 125/150/200 PX-PE-T5
Vespa 80 PX
Vespa 125 PX
Vespa 150 PX
Vespa 200 PE
Vespa Rainbow
ADJUSTMENTS
Micrometric adjustment ring for the spring preload
25-position register for hydraulic compression adjustment
TECHNICAL FEATURES
-Gas oleo-pneumatic shock absorber with separate reservoir
-Body and reservoir mount in Ergal, entirely machined from solid
-Upper mount in stainless steel
-Ø 14 mm shaft in tempered C45 steel
-Tempered steel spring, Ø 7 mm wire
-High resistance black anodized finish, with titanium color details on spring preload ring and hydraulic compression register
NOTES
The HTR suspension is fully regenerable using exclusively original Hitech Carbone spare parts
a=130 mm
Ø 100 mm
SIP Tubeless Rim 2.0 2.50x10 for Vespa 50-125/PV/ET3/PK/S/XL/XL2/125 GT-TS/150 GL/GS VS5T/Sprint/V/T4/Rally/PX/PE/Lusso/T5/Cosa/LML Star/DLX/Deluxe 2T/4T front or rear
Vespa 50/80/90/125/150/160/180/200
Size--> 2.50-10" with pre-installed valve
They clean helmets and visors, removing dirt and insects