Vespa 180
Small Parts Box -HÜNERSDORFF, Classic (225x335x55mm)- 24 compartments, blue
dimensions: 225 x 335 x 55 mm, 24 compartments, blue
transparent lid and base for optimal content viewing - compartment dimensions: 3= 52 x 52 x 45
Fiber washer for oil drain/fill plug
Cork tank cap gasket for Vespa 125 V1-33/VM/VN/VNA-TS/150 VL/VB/VBA-T4/GS VS1-5/160 GS/180 SS/Rally/P80-150X/PX80-200E/Lusso 1°/P150S/P200E
Vespa 125 from 1959 (excluding primavera ET3) Vespa 150 from 1959 Vespa 160 Vespa 180 Vespa 200
Thickness: 3 mm
All up to model PX / All Models >PX
Including tension rods and pads for fixing
Manufacturer: FACO (100% made in Italy)
Vespa 125 GTR VNL2T
Vespa 125 TS VNL3T
Vespa 150 Sprint 0118590 >
Vespa 150 Sprint Veloce VLB1T
Vespa 180 Rally
Vespa 200 Rally
With fixing plates
All models / Tutti i modelli
VMC tubeless aluminum rim in matte gray color 2.10/10 for Vespa 50-125/PV/ET3/PK/S/XL /XL2/125 GT-TS/150 GL/GS VS5T/Sprint/V/T4/Rally/PX/PE /Lusso/T5/LML Star/DLX /Deluxe 2T/4T
Vespa 50/80/90/125/150/160/180/200
Measure--> 2.10-10"
Attention---> Without Nuts
Aluminum footrest bracket m16 GP racing parts for Piaggio Ciao/SI/Bravo
Piaggio Ciao/SI/Bravo
The aluminum bar, with high strength due to its 16mm diameter, provides a stable base for the knurled footpegs, a design that ensures excellent grip and super effective anti-slip for both shoes and boots, whether on asphalt or off-road.
The footpegs are directly mounted on the bar and secured using a nut-against-nut system, with a washer in between to prevent loosening. To ensure additional safety, it is advisable to apply a minimal amount of threadlocker on both sides. Assembly requires only two wrenches: one 22 mm and one 20 mm.
Once correctly fastened, the footrests will remain stable and secure, requiring very little maintenance.
The knurled footrests are available in five colors:
-timeless aluminum color
-black, elegant and timeless
-gold, for a touch of luxury
-red, bold and spirited
-blue, lively and modern
Ariete Purple Fuel Hose KIT (65cm) for Vespa 50/90/125/150/160/180/200 Special-sprint-gtr-gl-ts-rally-ss-px-pe
All models/All models
Ref. Orig 219379 - 071506 - CM002609
Dimensions-->Ø 6x10 mm
High-performance gasoline hose that does not harden over time, flame-retardant.
SIP black aluminum tap control rod for Vespa 125/150/180 GT-GTR-TS-VNB-VBB-VBA-Sprint-Super-GL
Vespa 125 VNB1T > VNB6T
Vespa 125 GT VNL1>2T
Vespa 125 GTR VNL2T
Vespa 125 TS VNL3T
Vespa 125 Super VNC1T
Vespa 150 VBA1T
Vespa 150 VBB1T > VBB2T
Vespa 150 GL VLA1T
Vespa 150 Super VBC1T
Vespa 150 Sprint VLB1T
Vespa 150 Sprint Veloce VLB1T
Vespa 160 GS VSB1T
Vespa 180 SS VSC1T
Vespa 180 Rally VSD1T
Rod length: 150 mm
C/R
M14x1.25 long thread
Vespa 200 PX
Vespa 200 PE
Note: Long step M14x1 key 20.8 mm
All models
4th gear Crimaz gear (36 teeth) meshes on z20-21 for Vespa 125/150/200 PX-PE-Sprint V-Rally-TS-GTR
Vespa 125/150/200 PX-PE-Sprint V-Rally-TS-GTR
Warning: Compatible only with flat cruise shifter
CNC machined satin black SIP hub cover for Vespa 125/150/180/200 GT-GTR-TS-VNB-VBB-VBA-Sprint-Super-GL-Rally
Vespa 125 (all until 1976 excluding Primavera ET3)
Vespa 150 (all until 1976)
Vespa 180 (all)
Vespa 200 Rally VSE1T
SIP hub cap black CNC machined from solid for Vespa 125/150/180/200 GT-GTR-TS-VNB-VBB-VBA-Sprint-Super-GL-Rally
Vespa 125 (all up to 1976 excluding Primavera ET3)
Vespa 150 (all up to 1976)
Vespa 180 (all)
Vespa 200 Rally VSE1T
Aluminum footpeg pair Cuppini for Vespa 125 VNB2T 09001->/VNB3-6/GT/GTR/Super/TS/150 VBB1T 17451->/VBB2T/GL/Sprint/V/160 GS/180 SS/Rally
Vespa 125 VNB3T > VNB6T
Vespa 125 Super VNC1T
Vespa 125 GT VNL2T
Vespa 125 GTR VNL2T
Vespa 125 TS VNL3T
Vespa 150 VBB1T 17451>
Vespa 150 VLA1T
Vespa 150 Sprint VLB1T
Vespa 150 Sprint Veloce VLB1T
Vespa 150 VBB2T
Vespa 160 GS VSB1T
Vespa 180 SS VSC1T
Vespa 180 Rally VSD1T
Vespa 200 Rally VSE1T
Aluminum
Set screw fastening
20mm
Vespa Poster 70x100
Glossy black aluminum tubeless VMC rim 2.10/10 for Vespa 50-125/PV/ET3/PK/S/XL/XL2/125 GT-TS/150 GL/GS VS5T/Sprint/V/T4/Rally/PX/PE/Lusso/T5/LML Star/DLX/Deluxe 2T/4T
Vespa 50/80/90/125/150/160/180/200
Size--> 2.10-10" with pre-installed valve
Usable with tires: - 3.00 x 10 - 3.50 x 10 - 90/90-10
Front shock absorber complete Sip Performance gray 60 psi (medium) for Vespa 125 VM1
Vespa 125 V30T > V33T (adaptable)
All models from '53 to '79
Excluding 125 Primavera ET3,PK;PX,PE
1L Package
All models
Side attack on fender with grain
Blue, Yellow, Red, Green
All models - All Models
Dimensions: 5x28 mm Specific for gear cable, clutch, brake
Brake shoe return spring for Vespa VNL/TS/VLA/VLB/Rally/GS160/SS180/Sprint/V50/90/PV/ET3/SS
Vespa 50
Vespa 90
Vespa 125 Primavera
Vespa 125 Primavera ET3
Vespa 125 VNB4T
Vespa 125 VNB5T
Vespa 125 VNB6T
Vespa 125 Super VNC1T
Vespa 125 GT VNL1>2T
Vespa 125 GTR VNL2T
Vespa 125 TS VNL3T
Vespa 150 VBB2T
Vespa 150 Super VBC1T
Vespa 150 Sprint VLB1T
Vespa 150 Sprint Veloce VLB1T
Vespa 180 Rally VSD1T
Vespa 200 Rally VSE1T
Vespa PK
Vespa 125 V1T > V15T
Vespa 125 V30T > V33T
Vespa 125 VM1T
Vespa 125 VM2T
Vespa 125
Material: Steel
Safety cotter pin for cable clamps and various (10 pcs) Vespa 50/90/125/150/160/180/200
All Models / Tutti i modelli
Galvanized, 1.6x16mm
Bolt with nut for wire clamp Vespa 50-200 V50/PV/ET3/PK/S/ V1-33/ VM/VN/VL/VB/GS/VNA-T4/VNC/TS/GT/GTR/Sprint/V/Rally/SS180/PX
All models - Tutti i modelli
Galvanized
Transmission wire tightening
Complete wire clamp kit for Vespa 50-200 V50/PV/ET3/PK/S/ V1-33/ VM/VN/VL/VB/GS/VNA-T4/VNC/TS/GT/GTR/Sprint/V/Rally/SS180/PX
All models - All Models
Galvanized
Pin with cotter pins for Vespa 50-200 V50/PV/ET3/PK/S/V1-33/VM/VN/VL/VB/GS/VNA-T4/VNC/TS/GT/GTR/Sprint/V/Rally/SS180/PX wire clamp
All models - Tutti i modelli
Shock absorber spring plate for Vespa 125 VM/VN-TS 1°/150 VL-Super 1°/180 Rally/200 Rally 1°
Inferior
Shock absorber spring plate for Vespa 125 V30-33/VM/VN/ACMA/Hoffmann C/VNA-TS/150 VL/VB1/VD/VGLA/B/VGL1/GS/VBA-Super/Rally/P150S
Superior
Shock absorber upper buffer for Vespa 125/150/200 V30-VM-VN-VNA-VNB-GT-GTR-TS-VBA-VBB-VB1-GL-Sprint-Sprint Veloce
Vespa 125 V30T > V33T (adaptable)
All models from '53 to '79
Excluding 125 Primavera ET3, PK, PX, PE
Shock absorber buffer kit (2 pcs.) for Vespa V50/PV/ET3/PK/S/XL
Vespa 50 V5A1T N,L,R
Vespa 50 Special V5A2>3T
Vespa 50 Special V5B1>4T
Vespa 50 PK
Vespa 90 V9A1T
Vespa 125 Primavera VMA1T>2T
Vespa 125 Primavera ET3 VMB1T
Vespa 160 GS VSB1T
Vespa 180 SS VSCT
Rubber
Black
2Pcs Kit
Vespa GS 160 VSB1T
Vespa 180 SS VSC1T
bolt-->14.3x85mm
outer bearing: 25 mm
Complete front suspension pivot for Vespa 125/150/180/200 VNB-Super-GT-GTR-VBB-GL-Sprint-Sprint Veloce-Rally
Vespa 125 VNB5T 026921>
Vespa 125 Super VNC1T
Vespa 125 GT VNL2T
Vespa 125 GTR VNL2T
Vespa 150 VBB2T 212457>
Vespa 150 Super VBC1T
Vespa 150 GL VLA1T 67470> 79074
Vespa 150 Sprint VLB1T
Vespa 150 Sprint Veloce VLB1T
Vespa 180 Rally VSD1T
Vespa 200 Rally VSE1T
With roller cages
Front suspension pin fixing nut for Vespa 125/150 VM-VN-VNA-VNB-GT-GTR-Sprint-Sprint Veloce-Super-VB1-VBA-VBB-GL-Rally
Vespa 125 VM1>2T
Vespa 125 VN1>2T
Vespa 125 VNA1>2T
Vespa 125 VNB1>5T (up to frame 026920 )
Vespa 125 Super VNC1T
Vespa 125 GT VNL2T> 68099
Vespa 125 GTR> 106056
Vespa 150 VL1>3T
Vespa 150 GS VS1T>VS5T
Vespa 150 VB1T
Vespa 150 VBA1T
Vespa 150 VBB1>2T
Vespa 150 Super VBC1T > 88999
Vespa 150 Sprint VLB1T > 100091
Vespa 150 Sprint Veloce VLB1T > 151615
Vespa 150 GL VGL1T
Vespa 150 GL VGLA1T
Suspension spring support spacer for Vespa 125/150/180/200 VM- VN- VL-VB-VNA-VNB-VBA-VBB-GS-GL-Rally-Sprint-TS-GT-SS
Vespa 125/150/180/200 VM- VN- VL-VB-VNA-VNB-VBA-VBB-GS-GL-Rally-Sprint-TS-GT
Measurement: Ø 16.5mm, Øi 10mm
Complete pivot pin for Vespa 125/150/180/200 VNB-Super-GT-GTR-TS-VBB-GL-Sprint-Sprint Veloce-Rally
Vespa 125 VNB5T 026921>
Vespa 125 VNB6T
Vespa 125 Super VNC1T
Vespa 125 GT VNL2T
Vespa 125 GTR VNL2T
Vespa 125 TS VNL3T
Vespa 150 VBB2T 212456>
Vespa 150 GL VLA1T 067470>
Vespa 150 Super VBC1T
Vespa 150 Sprint VLB1T
Vespa 150 Sprint Veloce VLB1T
Vespa 180 Rally VSD1T
Vespa 200 Rally VSE1T
Complete spring support with screws, plate, and circlip
Economical Version
Front suspension pivot for Vespa 125/150 VM-VN-VNA-VNB-GT-GTR-Sprint-Sprint Veloce-Super-VB1-VBA-VBB-GL-Rally
Vespa 125 VM1>2T
Vespa 125 VN1>2T
Vespa 125 VNA1>2T
Vespa 125 VNB1>5T (up to frame 026920 )
Vespa 125 Super VNC1T
Vespa 125 GT VNL2T> 68099
Vespa 125 GTR> 106056
Vespa 150 VL1>3T
Vespa 150 GS VS1T>VS5T
Vespa 150 VB1T
Vespa 150 VBA1T
Vespa 150 VBB1>2T
Vespa 150 Super VBC1T > 88999
Vespa 150 Sprint VLB1T > 100091
Vespa 150 Sprint Veloce VLB1T > 151615
Vespa 150 GL VGL1T
Vespa 150 GL VGLA1T
With roller cages