Vespa 160
Gear selector prisoner m7x50 for Vespa 125-200 VNA-VBA-GT-TS-PX T5/Cosa
Vespa 125-200 VNA-VBA-GT-TS- PX T5/Cosa
Bolt for starter pedal fastening for Vespa 125 VNB/GT/GTR-150 VBB/Super/GL/160 GS/180SS/Rally
Vespa 125 VNB4>6T
Vespa 125 GT VNL2T
Vespa 125 GTR VNL2T> 146200
Vespa 125 Super VNC1T
Vespa 150 VBB2T
Vespa 150 Super VBC1T> 428216
Vespa 150 GL VLA1T
Vespa 150 Sprint VLB1T
Vespa 150 Sprint Veloce VLB1T
Vespa 160 GS VSB1T
Vespa 180 SS VSC1T
Vespa 180 Rally VSD1T
Vespa 200 Rally VSE1T > 0035413
Finish: Galvanized
Vespa 50-125/PV/ET3/PK/S/SS/XL/XL2/125 VNA -TS/150 VBA-Super/Rally/PX/PE/T5/Cosa
BGM PRO Radial Brake Caliper with 4 Pistons - Made in Italy (TÜV Approved)
The renowned BGM Pro radial brake caliper with 4 pistons has been completely redesigned and improved. Produced entirely in Italy, this new version boasts an optimized bleeding system that makes maintenance operations faster and easier than before. Combining elegant design with maximum functionality, BGM Pro offers a caliper that guarantees braking power, safety, and durability over time.
The BGM Pro Sport caliper offers a braking surface superior by about 28% compared to standard two-piston calipers (typical of Vespa PX or LML Star). The technical advantages translate into:
✅ Greater braking power: More decisive deceleration and reduced stopping distances.
✅ Improved feel: Optimized hydraulic transmission ratio for precise modulation.
✅ Even wear: Pressure distributed over 4 points ensures uniform contact between pads and disc.
✅ Quick maintenance: Pad replacement facilitated by the two-ring fastening system.
Technical Compatibility
Mounting: Radial for supports with hole spacing of 82 mm.
Adaptability: Also compatible with supports from other brands (e
The toy is self-propelled. This means that the "engine" is the driver themselves! This keeps girls and boys very active while promoting their neural development of motor skills and coordination.
The main specifications are as follows:
- Product dimensions: 76cm length, 30cm width, 43cm handlebar height, and 32cm seat height
- Product weight: 5.9 kg.
- Recommended age: 1-5 years
- Maximum allowed weight: 20 kg (limit due to the lack of brakes, not stability or quality).
Brake shoe pair Fa Italia for Vespa 125/150/160/180/200 GT-GTR-TS-Sprint-Sprint Veloce-GS-Rally-SS
Vespa 125 VNL2T GT
Vespa 125 VNL2T GTR
Vespa 125 TS VNL3T
Vespa 150 GL VLA1T
Vespa 150 Sprint VLB1T
Vespa 150 Sprint Veloce VLB1T
Vespa 150 GS VS1T (Anteriore e posteriore/Front and rear)
Vespa 150 GS VS2T (Anteriore e posteriore/Front and rear)
Vespa 150 GS VS3T>35310 (Anteriore e posteriore/Front and rear)
Vespa 150 GS VS4T
Vespa 150 GS VS5T
Vespa 160 GS VSB1T
Vespa 180 SS VSC1T
Vespa 180 Rally VSD1T
Vespa 200 Rally VSE1T
Vespa all models/All models
Vespa 125 VNB1T > VNB6T
Vespa 150 VL1T > VL3T
Vespa 150 VBA1T
Vespa 150 VBB1T > VBB2T
Vespa 150 VB1T
Vespa 150 GS VS1T > VS5T
Vespa 160 GS VSB1T
Thickness: 4 mm
Cooling spray -WEICON- 400ml for quick installation of ball bearings
All models
Weicon COLD SPRAY, 400ml, ideal for quick installation of ball bearings.
WEICON Cold Spray is versatile and suitable for troubleshooting in the field of electronics and for repairs in the industrial sector.
Metal components such as ball bearings, bushings, chain links, shafts, etc. can be inserted into the tightest of fits with WEICON COLD SPRAY
Speedometer Frame for Vespa 125 GT/150 VBA/VBB/GL/Sprint/GS VS5/160 GS/180 SS
Vespa 125 GT VNL2T
Vespa 150 VBA1T
Vespa 150 VBB1>2T
Vespa 150 GL VLA1T
Vespa 150 GS VS5T
Vespa 150 Sprint VLB1T
Vespa 160 GS VSB1T
Vespa 180 SS VSCT
In chrome-plated metal
Vespa 50/90/125/150/200 PX-Special
Front luggage rack type "ULMA" chrome for Vespa Largeframe Rally, Sprint, SS180, GS160, GT, GTR, GL, Super, VBB, VBA, VNA, VNB, GS150, VL, VB, VM, VN, V1-15, V30-33
Vespa Largeframe Rally, Sprint, SS180, GS160, GT, GTR, GL, Super, VBB, VBA, VNA, VNB, GS150, VL, VB, VM, VN, V1-15, V30-33
Check the size of your plug before purchasing.
Inspired by the classic Italian style that has always distinguished us, the 191 PIX is an extremely compact and lightweight demi-jet. It differs from the traditional spherical helmet thanks to the front metal air intakes and the rear shell cuts that also house the air extractors. The thermoformed interiors, fully removable and washable, are equipped with a chin strap and removable neck collar with a zip, and in all graphic variants, embellished with brown eco-leather details with a vintage style. The PIX can be equipped with a long visor for greater wind protection or a contoured visor with modern lines, the interchangeable visors share the fastening system which in the graphic versions is made of metal. The helmet's features are completed by the micrometric buckle, the anti-theft ring, the strap holder elastic, and in the graphic variants, the rear goggle strap holder.
Tool bag with tools Vespa 125/150/180/200 VNB, VBB, Rally, Sprint, PX, PK, Lambretta, GTS, Sprint, Primavera, LX, S, ET4 universal - black
Vespa 125/150/180/200 VNB, VBB, Rally, Sprint, PX, PK, Lambretta, GTS, Sprint, Primavera, LX, S, ET4 universal
Included:
- 6 ring spanners in sizes (7, 8, 9, 10, 11, and 13mm).
- A set of 10-piece ½" socket wrenches in sizes (10, 11, 13, 14, 17, 19, 21, 22, and 24mm)
- A set of 41-piece ¼" socket wrenches in sizes from 4mm to 14mm and bits for slotted, Phillips, hex, and TX wrenches
- Needle nose pliers
- Tube wrench
- Spark plug wrench
- 10 cable ties
- 10m insulating tape
- 100g of winding wire
- 11-piece Bowden cable repair kit
- Canvas tool bag with 5 compartments
Tool bag for Vespa 125/150/180/200 VNB, VBB, Rally, Sprint, PX, PK, Lambretta, GTS, Sprint, Primavera, LX, S, ET4 universal - brown
Vespa 125/150/180/200 VNB, VBB, Rally, Sprint, PX, PK, Lambretta, GTS, Sprint, Primavera, LX, S, ET4 universal
Hood closure tie rod (left) for Vespa 125 TS/PX-160 GS/180 SS/Rally/200 PE/rally
Vespa 125 PX
Vespa 125 TS VNL3T
Vespa 150 PX
Vespa 160 GS VSB1T
Vespa 180 SS VSCT
Vespa 180 Rally VSD1T
Vespa 200 Rally VSE1T
Vespa 200 PE
Spring, washer, and nut
Chrome-plated
Vespa 125 VNA1>2T
Vespa 125 VNB1>6T
Vespa 125 Super VNC1T
Vespa 125 GT VNL2T
Vespa 125 GTR VNL2T
Vespa 125 TS VNL3T
Vespa 125 PX
Vespa 150 GL VLA1T
Vespa 150 Super VBC1T
Vespa 150 VBA1T
Vespa 150 VBB1>2T
Vespa 150 Sprint VLB1T
Vespa 150 Sprint Veloce VLB1T
Vespa 150 PX
Vespa 160 GS VSB1T
Vespa 180 SS VSCT
Vespa 180 Rally VSD1T
Vespa 200 Rally VSE1T
Vespa 200 PX
Chromed
Spring, washer, and nut
Specific for carburetor
1.6 mm
4 mm
Vespa 160/180 GS VSB1T 029901>-SS VSC1T
Purifier gasket for Vespa 125/150 PX PE VBA VBB VNB GT GTR TS GL RALLY
Vespa PX
Vespa PE
Vespa 125
Vespa 150
Vespa 160
Vespa 180
Vespa 200
Siltech Performance Purifier Gasket for Vespa 125/150 PX PE VBA VBB VNB GT GTR TS GL RALLY
Vespa PX
Vespa PE
Vespa 125
Vespa 150
Vespa 160
Vespa 180
Vespa 200
Gasket for the carburetor box (WITHOUT MIXER) made of
sintered polymer, it is flexible but with excellent mechanical and chemical resistance.
It has the same shape as the box to avoid making joints and ensure optimal sealing.
Seal for faucet rod in grey color for Vespa 50-125 PV/ET3/PK/S/XL/VNA-TS/150 VBA-T4/160 GS/180 SS/Rally/P80-150X/PX80-200E/Lusso 1°/P150S/P200E
Vespa 50/90/125/150/160/180/200
Gray color
Base gasket for fuel tap for Vespa V50/PV/ET3/125/GT/GTR/Super/TS/150 Sprint/V/Super/180/200 Rally/GS160/SS180/PK50-125/PX80-200/T5
All models except VM1>2T, V30>33T, VB1T
Thickness--> 3mm
Viton fuel tap selector gasket for Vespa 50/90/125/150/200 N-L-R Primavera-PX-VBB-Sprint-GL
Vespa 50 all models
Vespa 90 all models
Vespa 125 from 1951 all models
Vespa 150 all except 150 GS VS1T 009451>
Vespa 160 all models
Vespa 180 all models
Vespa 200 all models
Note: Resistant to green gasoline
Vespa 50 all models
Vespa 90 all models
Vespa 125 from 1951 all models
Vespa 150 all except 150 GS VS1T 009451>
Vespa 160 all models
Vespa 180 all models
Vespa 200 all models
Note: Resistant to green gasoline
Vespa 160 GS 1962>64 VSB1T up to chassis 0055506
In rubber, color black
Gray transmission cable tube 50cm for Vespa 125/150 V30>33T/VM1>2T/VN/VL/VB1T/VNA/VNB/VBA/VBB/GL/Sprint/GT/GTR
All models
Measurements: Length: 500mm
Outer Diameter: 10mm
Cable mounting bracket for Vespa PX/T5/Cosa/VNA-VNB-VBB-Sprint-GT-GTR-TS-GL
VESPA 125 VNA1>2T
VESPA 125 VNB1>6T
Vespa 125 PX VNX1>2T
Vespa 125 GT -GTR-TS
Vespa 150 VBA1T
Vespa 150 VBB1>2T
Vespa 150 GL VLA1T
Vespa 150 GS VS2>5T
Vespa 150 Sprint VLB1T
Vespa 150 Sprint V.
Vespa 160 GS VSB1T
Vespa 180 SS VSC1T
Vespa 180 Rally VSD1T
Zinc-coated
Specifically designed for wire clutch
Specifically designed for wire exchange / Specifico per filo cambio
Specifically designed for wire exchange / Specifico per filo cambio
Complete cable clamp kit for Vespa V50/PV/ET3/PK/S/XL/XL2/FL/PX- Rally
All models / Tutti i modelli
Safety cotter pin for cable clamp and various (10 pcs) Vespa 50/90/125/150/160/180/200
All Models
Galvanized, 1.7x37mm
Vespa 50 V5A1T
Vespa 90 V9A1T
Vespa 125 Primavera VMA1>2T
Vespa 125 Primavera ET3 VMB1T
Vespa 125 VNA1>2T
Vespa 125 VNB1>6T
Vespa 125 GT VNL1>2T
Vespa 125 Super VNC1T
Vespa 125 GTR VNL2T
Vespa 125 TS VNL3T
Vespa 125 PX VNX1>2T
Vespa 150 VBA1T
Vespa 150 VBB1>2T
Vespa 150 Super VBC1T
Vespa 150 Sprint VLB1T
Vespa 150 Sprint Veloce VLB1T
Vespa 150 PX VLX1T
Vespa 160 GS VSB1T
Vespa 180 SS VSC1T
Vespa 180 Rally V
KIT rings OR engine for Vespa 125 VNA/VNB/GT/GTR/TS/Super/PX-150 PX/Sprint/GL/160 GS/180SS/200 Rally/PE
Vespa 125 1958>
Vespa 150 1959>
Vespa 160
Vespa 180
Vespa 200
KIT composed of 5 PCS
All Vespa models with SIP ignition