Vespa 125 PK Automatic VVM2T
All Models / Tutti i modelli
Graduated measuring cup for oil mixture 2% scale for liters/gallon without lid
Plastic
Graduated scale for 2% mixture
Vespa 50/90/125/150/180/200
Compatible with 10-inch open rims, it attaches to the fork tube by passing it through the wheel rim and securing it with the provided lock.
WARNING: Check the gap between the drum and the rim, on some models described as COMPATIBLE, a hole in the wheel rim may be necessary if the latter is NOT wide enough to allow the passage of the anti-theft device.
Compatible with our article: 02-CX-009-FA
All Vespa models
universal, 360° swivel, minimum height: 13cm, maximum: 43cm empty weight: 34kg, load: 400kg
Tin poster with central embossed image.
Dimensions 30x40 cm.
Flywheel puller tool M28x1 for Vespa 50-125/PV/ET3/PK50-125/S/XL/XL2/125 GT-TS/150 GL-Super/200 Rally/PX80-200/PE/Lusso/'98/MY/'11/T5/Cosa
Vespa 50
Vespa 50 PK
Vespa 125 PK/S/XL/
Vespa 125 ET3
Vespa 125 GT/TS
Vespa 150 GL/Super
Vespa 180/200 Rally
Vespa PX/PE/T5/Cosa
Size: 28x1
All models
The ignition timing is important for the thermal health of the
engine and for delivering full power. If you rebuild the
engine, you should not rely on existing marks for
ignition adjustment, but measure it personally. This is
easily possible with this electronic timing gun for
gasoline engines with contact or transistor ignition system
(CDI ignition as in series with ET3, PK, PX, PX, Cosa, T5 etc.) 6 and 12-volt ignitions can be adjusted at both 6 and 12 volts. Note:
It doesn't matter if the ignition is 6V or 12V, an external 12-volt power source (e.g. a car battery) is always needed if the
vehicle doesn't already have one.
A super bright xenon tube and a special converging lens ensure optimal visibility of the fixed markers even at speeds over 8000 rpm in the near field.
The gun is connected to a 12-volt battery via the crocodile clips and the inductive clip on the spark plug cable (without direct contact
with the wire)
Front and rear shock absorber kit "Sport Tuning" Carbon for Vespa 50/125 PK Rush-HP-N-FL
Vespa 50/125 PK Rush-HP-N-FL
FRONT SHOCK ABSORBER:
ADJUSTABLE TO 3 POSITION ADJUSTMENT - RED BODY - BLACK SPRING - COMPLETE WITH BUFFERS
REAR SHOCK ABSORBER:
ADJUSTABLE TO 3 POSITION ADJUSTMENT - RED BODY - BLACK SPRING
COMPLETE WITH UPPER AND LOWER SUPPORTS + FIXING BOLT
FRONT SHOCK ABSORBER: ADJUSTABLE TO 3 POSITION ADJUSTMENT - RED BODY - BLACK SPRING
COMPLETE WITH BUFFERS
REAR SHOCK ABSORBER:
ADJUSTABLE TO 3 POSITION ADJUSTMENT - RED BODY - BLACK SPRING
COMPLETE WITH LOWER AND UPPER BUFFERS + BOLT
Carburetor cover "AT design prototypes" KEIHIN -Polini-Dell'Orto
For carburetor:
Keihin PWK 28
Polini PWK 24-26-28-30
Dell'Orto PHBL
Stage 6 PWK 24-26-28
Voca PWK 24-28
Carburetor cover adjustable horizontally and vertically (to avoid abnormal tension on the throttle cable)
Lower steering bearing group Vespa 50-125/PV/ET3/PK50-125/S/SS/XL/125 GT-TS/150 Sprint/V/Super/160 GS/180 SS/Rally/PX80-200/PE/Lusso/'98/MY/'11/T5/Cosa
Vespa 50 V5A1T N/L/R
Vespa 50 Special V5A2T>3T
Vespa 50 Special V5B1T>4T
Vespa 90 V9A1T
Vespa 125 Primavera VMA1T>2T
Vespa 125 Primavera ET3 VMB1T
Vespa 125 PX
Vespa 125 GT/GTR/TS/Super
Vespa 150 PX
Vespa 150 GL VLA1T
Vespa 150 Sprint VLB1T
Vespa 150 Sprint Veloce VLB1T
Vespa 150 Super VBC1T
Vespa 160 GS VSB1T
Vespa 180 Rally VSD1T
Vespa 180 SS VSC1T
Vespa 200 Rally VSE1T
Vespa 200 PE
Vespa PK (All)
Complete
Right hinge for the glove box door for Vespa 50/125 PK FL FL2 HP AUTOMATIC
Vespa 50/125 PK FL FL2 HP AUTOMATIC
Vespa 50/90/125
Custom chrome left rearview mirror for Vespa 50/90/125/150/180/200
Vespa 50/90/125/150/180/200
Universal racing handlebar
Package: Left
Color: Chrome
Dimensions: length 170 mm; height 155 mm
Mirror: length 145 mm; height 44 mm
Included kit: M8 -M8 left; 10 x 1.25; 10 x 1.25 left
All models /All Models
Diameter: 1.2 mm
Length: 2000 mm
Barrel: 2.8x3 mm
All models / Tutti i modelli
Mirror support bracket on the handlebar in galvanized metal (LH)
Vespa 50
Vespa 90
Vespa 125
Vespa 150
Vespa 180
Vespa 200
Including hardware
Vespa 50/90/125/160/180/200
For PWK/PHBL/VHST carburetors
Black color. Equipped with touchscreen compatibility and knuckle protection, the Gig Pro gloves are made of genuine leather, feature CE D30 protections, and are CE and Moto CE certified.
- 100% genuine goat leather
- soft D30 inserts on knuckles and palm
- velcro adjustment on the wrist
- EN 13594:2015-CE motorcycle certified
Dark green color. Equipped with touchscreen compatibility and knuckle protection, the Gig Pro gloves are made of genuine leather, feature CE D30 protections, and are CE and Moto CE certified.
- 100% genuine goat leather
- soft D30 inserts on knuckles and palm
- velcro adjustment on the wrist
- Moto certified EN 13594:2015-CE
All models / Tutti i modelli
For windshield models with predisposition for cover mounting
Hole diameter: 30cm
Cloth size: 71x44.5 cm
Vespa 50
Vespa 90
Vespa 125
Vespa 150
Vespa 180
Vespa 200
Galvanized
Vespa 50/90/125/150/200
Internal diameter SX: 21mm
Internal diameter DX: 23mm
Includes lever guards
Thermal group fastening prisoner kit (4 pcs.) for VESPA 50 - 90 - 125 PRIMAVERA - ET3 - PK 125 - PK 125 XL - PX 125/150 - PXE ARC. - GTR 125 - SUPER 150 - SPRINT VELOCE 150
Vespa 125
Vespa 150
Size: M 7 x 142 mm
Vespa 50/90/125/150/180/200
Rearview mirror for classic motorcycles, high quality
Aluminum shell
Package: Left
Color: Chrome
Dimensions: Length 240 mm; height 250 mm
Barrel attachment M8 right and 10 x 1.25 right
Rearview mirror in black plastic (LH/RH) for Vespa 50/90/125/150/180/200
Vespa 50/90/125/150/180/200
Universal Reclining
You can mount this rearview mirror on either the right or left side, facing up or down.
Sold individually Package: Left / Right
Color: black
Adjustable rod Length from 0 to 100 mm.
Included Kit: M8-M8 left; 10×1.25; 10 x 1.25 left
All models
The ignition timing is important for the thermal health of the
engine and for delivering full power. If you rebuild the
engine, you should not rely on existing marks for ignition
adjustment, but measure it personally. This is
easily possible with this electronic timing gun for
gasoline engines with contact or transistor ignition system
(CDI ignition as in series with ET3, PK, PX, PX, Cosa, T5, etc.) The 6 and 12 volt ignitions can be adjusted at both 6 and 12 volts. Note:
It doesn't matter if the ignition is 6V or 12V, an external 12 Volt power source is always required (e.g. a car battery) if the
vehicle doesn't already have one.
A super bright xenon tube and a special converging lens ensure optimal visibility of the fixed markers even at speeds above 8000 rpm in the near field.
The gun is connected to a 12-volt battery via the crocodile clips and the inductive clip on the spark plug wire (without direct contact with the wire)
Odometer transmission for Vespa 50 PK/S/XL/XLRush/N-125 PK/S/XL/XLRush/N
Vespa 50 PK/S/XL/XLRush/N
Vespa 125 PK/S/XL/XLRush/N
Internal transmission in a large panel
Note: For models with a top case and windshield
carburetor PHB/VHST
4-hole model ⌀ 1mm
lamp
Vespa 50 V5A1T N,L,R (clutch side)
Vespa 50 Special V5A2>3T (clutch side)
Vespa 50 Special V5B1>4T (clutch side)
Vespa 90 V9A1T (clutch side)
Vespa 125 Primavera VMA1T>2T (clutch side)
Vespa 125 Primavera ET3 VMB1T (clutch side)
Vespa PK (clutch side)
Vespa 150 GS VS1T>5T (clutch and flywheel side)
Vespa 180 SS VSC1T (flywheel side)
Dimensions: 3x9.3mm
Vespa 50 V5B1>3T
Vespa 50 V5SS1>2T
Vespa 50 PK
Vespa 90 V9A1T
Vespa 125 Primavera VMA1T>2T
Vespa 125 Primavera ET3 VMB1T
Vespa 125 GT VNL2T
Vespa 125 GTR VNL2T
Vespa 125 TS VNL3T
Vespa 150 GS VS5T 0047351>
Vespa 150 GL VLA1T
Vespa 150 Sprint VLB1T
Vespa 150 Sprint Veloce VLB1T
Vespa 160 GS VSB1T
Vespa 180 SS VSCT
Vespa 180 Rally VSD1T
Vespa 200 Rally VSE1T
Vespa PX
Vespa PE
Included: Chrome nuts and valve
Vespa 50 V5B1>3T
Vespa 50 V5SS1>2T
Vespa 50 PK
Vespa 90 V9A1T
Vespa 125 Primavera VMA1T>2T
Vespa 125 Primavera ET3 VMB1T
Vespa 125 GT VNL2T
Vespa 125 GTR VNL2T
Vespa 125 TS VNL3T
Vespa 150 GS VS5T 0047351>
Vespa 150 GL VLA1T
Vespa 150 Sprint VLB1T
Vespa 150 Sprint Veloce VLB1T
Vespa 160 GS VSB1T
Vespa 180 SS VSCT
Vespa 180 Rally VSD1T
Vespa 200 Rally VSE1T
Vespa PX
Vespa PE
Included: Chrome nuts and valve
Channel 2.50