Vespa 125 PK Automatic VVM2T
Vespa 50/90/125/150/200
BARRDAHL - Cleaner, detergent, degreaser, deoxidizes, protects electrical contacts Electrical Contact Cleaner 500
All models
Particularly effective for cleaning electrical and electronic equipment
Vespa 90
Vespa 125
The NGK IX spark plug features a central electrode with a laser-welded Iridium tip. NGK resistive spark plug that incorporates a ceramic resistor to suppress radio interference generated by the sparking of the plugs.
M14x1.25, wrench size 20.8mm
shielded/short thread
Comparison--> BOSCH W3AS/W4AS
All models
• With rotating magnetic clip.
• Excellent lighting.
• Low energy consumption.
• Long lifespan.
• Batteries (not included): 3 x AAA
• Battery life: ± 6 h
• Light source: 1W Cob + 1 Led
• Brightness: 100 lm
• Light temperature: 6000° K
• Protection class: IP 44
Maximum Jet step M 6 for carburetors FHBB/PHB/PHBL/PHVA/PHVB/VHS-MIKUNI VM16-20
Size: M 6
Quick Shift Gear Command Pulley "Short Shifter" for Vespa PK50-125 S/SS/Lusso/XL/ETS/Rush/N/PX80-200/PE/Lusso/'98/MY/'11/T5/Cosa 1
Vespa 50 PK
Vespa 50 PK XL
Vespa 50 PK N
Vespa 50 PK Rush
Vespa 125 PK
Vespa 125 PX T5
Vespa 125 PX
Vespa 150 PX
Vespa 200 PX
Ø 50 mm
aluminum, CNC milled
silver anodized
Vespa 50/90/125
Vespa 50/90/125/150/200
Elastic attack with 40 mm graft
Calibration: Max jet 122, min jet 42
Multi-purpose Lithium Grease BARDAHL M.P.G. MPG NLGI (250ml package)
500g
Primary transmission gear set Easy Crimaz z27 on 69 clutch bell for Vespa 50/125 Special-Primavera-ET3
Vespa 50 V5A1T N,L,R
Vespa 50 PK
Vespa 90 V9A1T
Vespa 125 Primavera VMA1>2T
Vespa 125 Primavera ET3 VMB1T
Primary transmission gear set Easy Crimaz z24 on 72 clutch bell for Vespa 50/125 Special-Primavera-ET3
Vespa 50 V5A1T N,L,R
Vespa 50 PK
Vespa 90 V9A1T
Vespa 125 Primavera VMA1>2T
Vespa 125 Primavera ET3 VMB1T
Primary transmission pair TOP Crimaz z26 on bell 69 with reinforced clutch basket and shock absorber for Vespa 50/125 Special-Primavera-ET3
Vespa 50 V5A1T N,L,R
Vespa 50 PK
Vespa 90 V9A1T
Vespa 125 Primavera VMA1>2T
Vespa 125 Primavera ET3 VMB1T
The construction of the teeth is carried out with a module gear shaper tool
1.5 with relative corrections for the sprockets added to the original
pair.
The tooth width has been widened (1 mm towards the inside) to
achieve greater resistance without compromising smoothness.
The spring seats have been revised to use springs with square wire. The greater travel of the damper preserves the gearbox and cruise.
In the center, there is a roller bearing on the most
stressed part and a guide bushing on the shaft. This solution
allows the bell to be compatible with the original starting
gears.
TOP Crimaz primary transmission pair z26 on bell 69 with reinforced clutch basket and shock absorber for Vespa 50/125 Special-Primavera-ET3
Vespa 50 V5A1T N,L,R
Vespa 50 PK
Vespa 90 V9A1T
Vespa 125 Primavera VMA1>2T
Vespa 125 Primavera ET3 VMB1T
The construction of the teeth is carried out with a module gear hob
1.5 with relative corrections for the pinions added to the original
pair.
The width of the tooth has been widened (1 mm towards the inside) to
achieve greater resistance without compromising smoothness.
The spring seats have been revised to use springs with square wire. The greater travel of the shock absorber preserves the gearbox and the cruise.
In the center, there is a roller bearing on the most
stressed part and a guiding bushing on the tail. This solution
allows the bell to be compatible with the original starting gears.
Primary transmission pair TOP Crimaz z25 on 69 bell with reinforced clutch basket and shock absorbers for Vespa 50/125 Special-Primavera-ET3
Vespa 50 V5A1T N,L,R
Vespa 50 PK
Vespa 90 V9A1T
Vespa 125 Primavera VMA1>2T
Vespa 125 Primavera ET3 VMB1T
The construction of the teeth is carried out with a module hob
1.5 with relative corrections for the pinions added to the original
pair.
The width of the tooth has been widened (1 mm towards the inside) to
have greater resistance without compromising smoothness.
The spring seats have been revised to use springs with square wire. The greater travel of the shock absorber protects the gearbox and cruise.
In the center there is a roller bearing on the most
stressed part and a guide bushing on the shaft. This solution
allows the bell to be compatible with the original starting
gears.
Primary transmission pair TOP Crimaz z25 on 72 bell with reinforced clutch basket and shock absorber for Vespa 50/125 Special-Primavera-ET3
Vespa 50 V5A1T N,L,R
Vespa 50 PK
Vespa 90 V9A1T
Vespa 125 Primavera VMA1>2T
Vespa 125 Primavera ET3 VMB1T
The construction of the teeth is carried out with a module gear shaper
1.5 with relative corrections for the pinions added to the original
pair.
The width of the tooth has been widened (1 mm inward) to
provide greater strength without compromising smoothness.
The spring seats have been revised to use springs with square
wire. The greater travel of the shock absorber preserves the gearbox and clutch.
In the center, there is a roller bearing on the most
stressed part and a guide bushing on the shaft. This solution
allows the bell to be compatible with the original starting
gears.
Primary transmission pair TOP Crimaz z24 on 72 bell with reinforced clutch basket and shock absorber for Vespa 50/125 Special-Primavera-ET3
Vespa 50 V5A1T N,L,R
Vespa 50 PK
Vespa 90 V9A1T
Vespa 125 Primavera VMA1>2T
Vespa 125 Primavera ET3 VMB1T
The construction of the teeth is carried out with a module 1.5 gear shaper tool with relative corrections for the pinions added to the original pair.
The width of the tooth has been widened (1 mm inward) to have greater resistance without compromising smoothness. The spring seats have been revised to use springs with square wire. The greater stroke of the shock absorber preserves the gearbox and the cruise. In the center, there is a roller bearing on the most stressed part and a guide bushing on the shaft. This solution allows the bell to be compatible with the original starting gears.
Primary transmission pair TOP Crimaz z23 on bell 72 with reinforced clutch basket and shock absorber for Vespa 50/125 Special-Primavera-ET3
Vespa 50 V5A1T N,L,R
Vespa 50 PK
Vespa 90 V9A1T
Vespa 125 Primavera VMA1>2T
Vespa 125 Primavera ET3 VMB1T
The construction of the teeth is carried out with a module
1.5 gear shaper tool with relative corrections for the pinions added to the original pair.
The width of the tooth has been widened (1 mm towards the inside) to
provide greater resistance without compromising smoothness.
The spring seats have been revised to use springs with square wire. The greater stroke of the shock absorber preserves the gearbox and cruise.
In the center, there is a roller bearing on the most
stressed part and a guide bushing on the shaft. This solution
allows the bell to be compatible with the original starting gears.
Primary transmission gear pair TOP Crimaz z22 on 72 bell with reinforced clutch basket and shock absorbers for Vespa 50/125 Special-Primavera-ET3
Vespa 50 V5A1T N,L,R
Vespa 50 PK
Vespa 90 V9A1T
Vespa 125 Primavera VMA1>2T
Vespa 125 Primavera ET3 VMB1T
The construction of the teeth is carried out with a module 1.5 gear cutter tool with relative corrections for the pinions added to the original pair.
The width of the tooth has been widened (1 mm towards the inside) to have greater resistance without compromising smoothness.
The spring seats have been revised to use springs with square wire. The greater stroke of the damper preserves the gearbox and the driveshaft.
In the center, there is a roller bearing on the most stressed part and a guide bushing on the shaft. This solution allows the bell to be compatible with the original starter gears.
Primary transmission gear pinion 28 Teeth (28-69) for Vespa 50-90-125 Primavera/ET3/PK
Vespa 50 V5A1T N,L,R
Vespa 50 PK
Vespa 90 V9A1T
Vespa 125 Primavera VMA1>2T
Vespa 125 Primavera ET3 VMB1T
Vespa 125 PK
Fits perfectly on bell 27-69, complete with washer and nut
Collection of 8 assorted adhesive labels with Vespa communication logos and images.
Vespa 50/90/125/150/160/180/200
DRT pinion primary transmission gear z26 on crown z69 for Vespa Vespa 50/90/125 Special-Primavera-ET3-PK
Vespa 50 V5A1T N,L,R
Vespa 50 PK
Vespa 90 V9A1T
Vespa 125 Primavera VMA1>2T
Vespa 125 Primavera ET3 VMB1T
Vespa 125 PK
It fits perfectly by replacing the original 27-tooth sprocket.
All Models / Tutti i modelli
Note: Soft type with high heat resistance and maximum transmission power
Measurements: Diameter 7 mm, length 50 cm
All models / Tutti i modelli
UNISEX
black/grey
80% cotton, 17% polyamide, 3% elastane
Adaptable to all "3 button" helmets
All models
In case-hardened steel with a square section of 8 mm.
Lock cylinder reinforced with anti-drill plates.
End ring for sliding closure.
Scratch-resistant nylon chain cover.
3 keys included
Handwashing Paste (4 kg) particularly suitable for removing various types of dirt such as grease, oils, and inks; essential for mechanics
The particular formulation allows for deep cleansing of the epidermis by combining the chemical action of detergents with the mechanical action of microgranules.
Based on glycerin for soft, hydrated skin with a lemon fragrance.
Engine cleaner and degreaser - 500 ml Designed to remove grease, oil, and encrusted dirt from all types of engines, including aluminum surfaces
• Effective on wheels and tires, quickly removes brake dust, tar, dirt, and rubber residues.
• Easy to use, just spray and wait for it to change color
(orange); then rinse with a water jet (no need
to use brushes).
• Sodium-based cleaning function that can be used on both wheels and tires.
• Does not damage tires.
• Suitable for most alloy wheels, including steel, chrome, and painted ones.
Pro-Clean, set of 5 multi-purpose brushes for washing and cleaning cars, motorcycles, bicycles
Brush with dual-density bristles for engine casing cleaning
All models
All models