Classic Vespa
Purifier cover (models with mixer) for Vespa P200E/PX200E/Lusso/`98/MY/T5 /Cosa 200
Vespa 125 T5 VNX5T
Vespa 125 T5 Elestart VNX5T
Vespa 200 Rally VSE1T
Vespa 200 PX VSX1T
Vespa 200 PX Arcobaleno VSX1T
Vespa 200 Cosa1 VSR1T
Vespa 200 Cosa2 VSR1T
SIP Fiberglass Air Filter Cover for Vespa 180-200 Rally/P80 -150X/P200E/PX80-200E/Lusso /`98/MY/`11/T5 (with mixer)
Vespa 150 PX VLX1T
Vespa 200 Rally VSE1T Vespa P 200 E VSX1T
Vespa PX 200 E VSX1T
Vespa PX 200 E Rainbow VSX1T
Vespa PX 200 E Rainbow Elestart VSX1T
Vespa 200 PE VSX1T Millennium '98
The airbox for the original carburetor casing. Even the largest carburetor
is useless if it cannot draw enough air into a PX engine. The airboxes for the SI carburetor casings provide a remedy
here, as their significantly larger volume gives the engine a
good 20% more air than the original carburetor casing cover. The engine responds much better, especially at
low revs.' in volume, suitable for models WITH mixer
-More than 20% volume.
Specific for carburetor
1.6 mm
4 mm
Vespa 125/150 VM-VN-VL-VB
Cable gland for accelerator/electrical system sheath for Vespa 150 GS
Vespa 150 GS VS1T>5T (throttle)
Vespa 150 VL1>3T (Electrical system)
In rubber, color gray
Cable Grommet Fuel Tube Body for Vespa 80/125/150/160/180/200 Sprint, VNB-VBB-VBA-GT-GTR-PX-Cosa
Vespa 125 from 1958, Vespa 150 from 1958, Vespa 160 GS VSB1T, Vespa 180, Vespa 200, PX / PE
T5
In rubber, black color
Vespa 150 GS VS1>5T
Diameter: 17 mm
Oil mixer cable grommet on reservoir for Vespa PX/T5/Cosa-113059
Vespa PX / PE
Vespa 125 T5
Vespa Cosa
Fuel hose grommet for Vespa 80/125/150/160/180/200 T5-Sprint, VNB-VBB-VBA-GT-GTR-PX-Rally
Vespa 125 from '58 (all)
Vespa 150 from '58 (all)
In rubber, black color
LML oil filter cover gasket for LML Star 125-150 4T/Star Deluxe 125-150 4S/Speedy
LML Star 125-150 4T/Star Deluxe 125-150 4S/Speedy
Vespa 125 VN1T > VN2T
Vespa 125/150 PX
Vespa 125 PX T5 VNX5T
Vespa 125 Cosa
Vespa 150 Cosa
Vespa 200 PE
Base gasket mixer in aramid for Vespa 180-200 PX80-200/PE/Lusso/'98/MY/'11/T5/Cosa
Vespa 125/150 PX
Vespa 125 PX T5 VNX5T
Vespa 125 Cosa
Vespa 150 Cosa
Vespa 200 PE
Oil filter cover gasket for LML Star 125-150 4T/Star Deluxe 125-150 4S/Speedy
LML Star 125-150 4T/Star Deluxe 125-150 4S/Speedy
Gasket between crankcase and air filter box in aramid for Vespa PX80-200E/Lusso/'98MY/'11/Cosa
Vespa 125/150/200 PX with Mix/with mix
Vespa 200 Rally VSE1T
Vespa 125/150 200 Cosa
In aramid
Carburetor gas valve UB23 (increased +0.3mm) for Vespa 150 GS VS1>5T
Vespa 150 GS VS1>5T
for carburetor Si 27.23
CNC milled, hard anodized
Vespa PX 125 T5 VNX5T
Vespa PX 125 T5 Elestart VNX5T
Note--> For models with a mixer
Seal/cap for air cleaner (carburetor screw) for Vespa 125 VNB-TS/150 VBA-Super/Rally/PX80-200/PE/Lusso/T5
Vespa 125 (excluding Primavera ET3)
Vespa 150
Vespa 160
Vespa 180
Vespa 200
Carburetor-air filter gasket pair, engine cover-air filter for Vespa 125 VNB-TS/150 VBA-Super/Rally/PX80-200/PE
Vespa 125/150
Paper
2 Pcs.
Gasket/cap for air filter (carburetor screw) for Vespa PX125-200 E Lusso/T5 2°
Vespa PX125-200 E Lusso/T5 2°
Carburetor-depurator gasket pair, depurator-carter with mix for Vespa 200 Rally VSE1T
Vespa 200 Rally VSE1T
Carburetor-Air Filter Gasket ATHENA for Vespa 125 VNB-TS/150 VBA-Super/Rally/PX80-200/PE
Vespa 125/150
Athena offers the widest range of loose replacement gaskets
available on the market. At the core of Athena gaskets are
over forty years of industry experience, solid know-how, and
high technical skills in design and production.
Athena boasts constant technological development conducted by an in-house
team of engineers and designers and a Made in Italy production
carried out strictly following the stringent parameters set by manufacturers.
Vespa 160/180 GS VSB1T 029901>-SS VSC1T
Gasket for Piaggio air filter for Vespa 180-200 Rally/P80-150X /P200E/PX80-200E/Lusso/`98 /MY/`11/T5
Vespa 180-200 Rally/P80-150X /P200E/PX80-200E/Lusso/`98 /MY/`11/T5/Cosa
Attention--> ONLY models with mixer
Purifier gasket (carburetion screw) with mix for Vespa PX80/125/150/200 E /'98/'MY/'11/Cosa/T5
Vespa PX80/125/150/200 E /'98/MY/'11/Cosa/T5
Purifier gasket for Vespa 125/150 PX PE VBA VBB VNB GT GTR TS GL RALLY
Vespa PX
Vespa PE
Vespa 125
Vespa 150
Vespa 160
Vespa 180
Vespa 200
Athena gasket between crankcase and air filter for Vespa 125/150/180/200 PX-PE-T5 with Mix
Vespa 125/150/180/200
Athena provides the widest range of replacement bulk gaskets available on the market. At the core of Athena gaskets are over forty years of industry experience, solid know-how, and high technical skills in the design and production phases. Athena boasts constant technological development conducted by an internal team of engineers and designers and a Made in Italy production carried out strictly following the strict parameters imposed by manufacturers.
Athena gasket between crankcase and air filter for Vespa 125 VNB-TS/150 VBA-Super/Rally/PX80-200/PE
Vespa 125/150/180/200
Athena provides the widest range of loose replacement gaskets available on the market. At the core of Athena gaskets are over forty years of industry experience, solid know-how, and high technical skills in the design and production phase. Athena boasts constant technological development conducted by an internal team of engineers and designers and a Made in Italy production carried out strictly following the stringent parameters imposed by the manufacturers.
For models without MIX
Athena gasket between carburetor and air filter for Vespa 125 VNB-TS/150 VBA-Super/Rally/PX80-200/PE
Vespa 125/150/180/200
Athena provides the widest range of bulk replacement gaskets available on the market. Athena gaskets are based on over forty years of industry experience, solid know-how, and high technical skills in the design and production phases. Athena boasts constant technological development carried out by an internal team of engineers and designers and a Made in Italy production executed by strictly adhering to the stringent parameters imposed by the manufacturers.
For models without MIX
Athena gasket between carburetor and air filter for Vespa 125/150 PX with Mix
Vespa 125/150/180/200
Athena provides the widest range of replacement loose gaskets available on the market. Athena gaskets are based on over forty years of industry experience, solid know-how, and high technical skills in the design and production phase. Athena boasts constant technological development conducted by an internal team of engineers and designers and a Made in Italy production carried out by strictly following the tight parameters imposed by the manufacturers.
Gasket between housing and air filter box ATHENA for Vespa PX80-200E/Lusso/'98MY/'11/Cosa
Vespa 125/150/200 PX with Mix/with mix
Vespa 200 Rally VSE1T
Vespa 125/150 200 Cosa
In aramid
Siltech Performance Purifier Gasket for Vespa 125/150 PX PE VBA VBB VNB GT GTR TS GL RALLY
Vespa PX
Vespa PE
Vespa 125
Vespa 150
Vespa 160
Vespa 180
Vespa 200
Gasket for the carburetor box (WITHOUT MIXER) made of
sintered polymer, it is flexible but with excellent mechanical and chemical resistance.
It has the same shape as the box to avoid making joints and ensure optimal sealing.
Siltech Performance air filter gasket for Vespa 180-200 Rally/P80-150X /P200E/PX80-200E/Lusso/`98 /MY/`11/T5
Vespa 180-200 Rally/P80-150X /P200E/PX80-200E/Lusso/`98 /MY/`11/T5/Cosa
Gasket for the carburetor box (WITH MIXER) made of sintered polymer, it is flexible but with excellent mechanical and chemical resistance.
Piaggio gasket under carburetor bowl for Vespa 125/150/180/200 Rally-PX-/'98/MY/'11/T5/Cosa
Vespa 180/200 Rally-PX-'98/MY/'11/T5/Cosa
In aramid
for models with a mixer
Gasket between crankcase and air filter box Piaggio for Vespa PX80-200E/Lusso/'98MY/'11/Cosa
Vespa 125/150/200 PX with Mix/with mix
Vespa 200 Rally VSE1T
Vespa 125/150 200 Cosa
In aramid
Air box VMC VENTURI for Vespa 125 TS /150 Sprint V./Rally/P80 -200E/PX80-200E/Lusso/'98/MY /'11/T5
Vespa 80/100/125/150/200 PX PE
The venturi hole is Ø 26mm and fits perfectly with carburetors of this size. To adapt it to smaller carburetors, it is necessary to file the first part of the carburetor's intake duct, while for carburetors with a diameter greater than 26mm, it is necessary to slightly file the venturi to fit the carburetor's diameter.
Advantages:
Improves engine performance
Increases power, acceleration, and top speed
Compatible with carburetors with or without a mixer
Possibility to mount an air filter directly in the box
Refined and classic look
Indeformable aluminum body
Vespa 125/150/180/200
Vespa 160 GS VSB1T >0030200
Body gasket and shock absorber support for Vespa 125 V1T-V15T, Vespa 125 V30T-V33T
Vespa 125 V1T>15T
Vespa 125 V30T>V33T>228595
In black rubber
Body seal and shock absorber support for Vespa 125 V33T 228596->/VM/VN/ACMA70191->/VL/VB/GS
Vespa 125 V32T 228596>
Vespa 125 V33T
Vespa 125 VM1>2T
Vespa 125 VN1>2T
Vespa 150 VL1>3T
Vespa 150 VGL1T
Vespa 150 VB1T
Vespa 150 GS VS1>5T
In black rubber