Pinasco
Rubber plug for spark plug hole closure on plastic cover for Vespa 50/90/125/150/200
Vespa 50/125/150/200/250/300
Vespa 125 Primavera VMA1T>2T
Vespa 125 Primavera ET3 VMB1T
Vespa 125 PK S
Cone 19 mm / Cone 19 mm
Stroke 51
Made of forged steel, CNC machined. The shaft is made with numerous heat treatments that ensure the highest quality and reliability. The connecting rod is forged, designed to withstand any type of stress.
Complete Reed Valve Engine Case 8X 2.0 for Vespa 200 PX-PE-Rally
Vespa 200 Rally VSE1T
Vespa P 200 E VSX1T
Vespa PX 200 E VSX1T
Vespa PX 200 E Rainbow VSX1T
Vespa PX 200 E Rainbow Elestart VSX1T
Vespa 200 PE VSX1T Millennium '98
Vespa 200 Cosa VSR1T
How many times have you been stranded with your Vespa due to the clutch side oil seal? How many times have you thrown up your hands in surrender because the oil seal slipped out of its seat? How many times have you damaged the bearing seat because of the extremely hard clutch springs and engine performance?
Pinasco, always seeking solutions to the most common problems of modified Vespas, offers a solution to this inconvenience by updating the clutch bank of its engine casing with the new 2.0 model.
Thanks to the new fastening system with 3 steel plates, the specific Pinasco oil seal is locked between the casing and the crankshaft bearing without the possibility of coming out of its seat. The plates ensure perfect registration of the bearing, eliminating the play that often forms between the circlip and bearing, and the safety clips ensure the total locking of the entire system.
The new bearing seat has been further reinforced with the addition of 3 new ribs that guarantee the support and holding of the entire engine bank, and 2 reinforcement ribs have been added on the cluster shaft.
The crank chamber is bored to accommodate crankshafts with increased shoulders.
The die-casting technique used for
Vespa 200 PX-PE-Rally
Vespa 125 PX
Vespa 125 GT/GTR/TS
Vespa 150 PX
Vespa 150 Sprint Veloce
Thickness: 1mm
for SHA carburetors
Pinasco has created an enlarged filter to increase the volume of air drawn into the carburetor for Piaggio mopeds, thereby enhancing engine performance, especially at low revs. In tuning, the increase in displacement and carburetor size reduces the efficiency of the intake system due to a limited air volume, which is often insufficient to fuel the engine. Pinasco Airbox Moped, however, thanks to the increased filtering surface, allows the engine to "breathe" and "respond" effectively to the continuous opening of the throttle valve. The internal baffles and rounded edges around the carburetor channel the air and optimize the flow inside the venturi duct. Care and time have been given to the study of fluid dynamics. Pinasco Airbox is only mounted on SHA carburetors.
Complete thermal group Pinasco (225 cc) LONG STROKE In Aluminum for Vespa 200 PE-Rally-Cosa
Vespa 200 Rally VSE1T
Vespa 200 PE VSX1T
Vespa 200 Cosa VSR1>2T
Vespa 200 PE VSX1T Millennium '98
Cylinder made of Aluminum alloy with Nicasil coating that ensures unparalleled robustness and resistance.
Complete aluminum thermal group with head d.42 (sp12 mm) for Piaggio Ciao-Bravo-Boxer
Piaggio Ciao-Bravo-Boxer
Pinasco aluminum thermal group Ø 42mm, ideal for those who want to add some zest to their 50cc. The kit does not require any special technical knowledge for installation and easily fits all CIAO, SI, BRAVO mopeds. The aluminum with Nicasil coating gives the Pinasco thermal group exceptional robustness and unique resistance, ensuring superior performance in
all usage ranges.
60cc transformation
Aluminum thermal group complete with head d.42 (sp10 mm) for Piaggio Ciao-Bravo-Boxer
Piaggio Ciao-Bravo-Boxer
Pinasco thermal group in aluminum Ø 42mm, ideal for those who want to add a bit of zest to their 50cc. The kit does not require special technical knowledge to be mounted and easily fits all CIAO, SI, BRAVO mopeds. The aluminum with Nicasil coating gives the Pinasco thermal group exceptional robustness and unique resistance, ensuring superior performance in
all usage ranges.
Conversion to 60cc
Pinasco "Zuerino" SVR thermal group (102cc) for Vespa 50 V5A1T N/L/R/50 Special V5A2>3T/50 Special V5B1>4T/50 PK/
Vespa 50 V5A1T N,L,R, Vespa 50 Special V5A2>3T, Vespa 50 Special V5B1>4T, Vespa 50 PK, Ape 50
The Pinasco 102cc SRV "Zuerino" Ø 55mm thermal group is a new product dedicated to the world of Vespa 50 and Ape 50 with a 43mm stroke. Based on the famous Zuera 135cc, the 102cc SRV "Zuerino" features a transfer system very similar to that of its bigger brother, using the same RD350-type reed valve pack and the same flow guide, it mounts a single-ring piston with bi-conical pin, the new central spark plug head with 8 studs and centering bushings that definitively eliminates the problem of leaks and consequent performance drops with a compression ratio of 12.3:1.
The Pinasco 102cc SRV is a generous engine designed to make the most of power at low revs, its exhaust port has been designed to work correctly with original exhausts and commonly called "banana" stamped exhausts but can also be used in more advanced setups.
Pinasco oversized brake shoe set for Vespa 125/150 V30>33T/VM1>2T/VN1>2T/VL1>3T/VNB
Vespa 98 V98T
Vespa 125 V1>11T
Vespa 125 V12T>15T
Vespa 125 V30>33T
Vespa 125 VM1>2T
Vespa 125 U VU1T
Vespa 125 VN1>2T
Vespa 125 VNA1>2T
Vespa 125 VNB1>6T
Vespa 150 VL1>2T
+50% of surface area compared to the original
Pinasco Ø42 thermal group head central spark plug for Piaggio Ciao-SI-Bravo-Boxer
Yes-Hello-Good
Pinasco Ø46 central spark plug thermal head for Piaggio Ciao-SI-Bravo-Boxer
Yes-Hello-Good
Piaggio Ciao
Specific component for the Ciao models. Significantly increases driving comfort at high speeds
Complete Pinasco Old Shock Absorber for Vespa 125 VM1>2T/VN1>2T/VNA/VNB/GT/GTR/TS/Super-150 VL1>3T/VB1T/VBA/VBB/GL/Sprint/Super-180 Rally-200 Rally
Vespa 125 V30T > V33T (adaptable)
All models from '53 to '79
Excluding 125 Primavera ET3, PK; PX, PE
Pinasco has created for all Vespa Old models, 1951-1977, a front hydraulic shock absorber with supports and mounts made from high-strength aluminum. Designed to improve driving comfort, the Pinasco shock absorber has been engineered to work optimally with the original springs and ensure the right balance both in compression and extension phases, optimizing braking and vehicle stability. All parts exposed to atmospheric agents have been anodized, giving the shock absorber an elegant and characteristic matte black color.
Vespa 80 PX
Vespa 125 PX
Vespa 150 PX
Vespa 200 PE
Vespa Rainbow
Double-acting oleo-pneumatic shock absorber with spring preload
adjusted by a millimetric aluminum ring, calibrated harmonic steel
spring. Body: black, spring black
Pinasco racing head decompression valve diam. 42/46 for Ciao-SI-Bravo
Yes/Hello/Good
Primary gear set with extended ratio (Z23-64) straight teeth with pinion (8 springs) complete with shock absorber for Vespa 125/150/200 PX-PE-Arcobaleno-Disc brake-Cosa
Vespa 200 PE VSX1T Millennium '98
Vespa 200 Cosa VSR1T
Vespa 125 GT VNL2T
Vespa 125 GTR VNL2T
Vespa 125 TS VNL3T
Vespa 125 PX
Vespa 150 Sprint VLB1T
Vespa 150 Sprint Veloce VLB1T
Vespa 150 PX
Vespa 200 PE
Recalculated and solid-derived cone, specifically designed to improve engine performance, especially at low revs, thanks to the "Venturi effect".
Vespa 125 GT VNL2T
Vespa 125 GTR VNL2T
Vespa 125 TS VNL3T
Vespa 125 PX
Vespa 150 Sprint VLB1T
Vespa 150 Sprint Veloce VLB1T
Vespa 150 PX
Vespa 200 PE
Racing Version
Pinasco cross-type with thread for Vespa VNB - VBB - TS - GL - GT - SPRINT - SPRINT V
Vespa 125 VNB1>5T
Vespa 125 Super VNC1T
Vespa 125 GT VNL2T
Vespa 125 GT R VNL2T
Vespa 150 VL1>3T
Vespa 150 VB1T
Vespa 150 VBA1T
Vespa 150 VBB1T
Vespa 150 VBB2T
Vespa 150 GL VLA1T
Vespa 150 Super VBC1T
Vespa 150 Sprint VLB1T
Vespa 150 Sprint Veloce VLB1T
Vespa 160 GS VSB1T
Vespa 180 Rally VSD1T
Vespa 180 SS VSC1T
Pinasco carburetor filter d.22 for Vespa low headlight 125/150 VM-VN-VL
Vespa 125 VM1T>VM2T
Vespa 125 VN1T>VN2T
Vespa 150 VL1T>VL3T
Primary gear pair with extended ratio Pinasco (Z 23/64) for Vespa 125/150 VNB-GT-GTR-TS-PX-VBB-GL-Sprint-Sprint Veloce
Vespa 125 PX, Vespa 125 TS, Vespa 150 PX, Vespa 150 Sprint Veloce
Included: Torque limiter
Z 23-64 with straight teeth
Complete thermal group Pinasco (215 cc) with central spark plug
Vespa 200 Rally VSE1T
Vespa 200 PE VSX1T
Vespa 200 Cosa VSR1>2T
Cylinder made of Aluminum alloy with Nicasil coating that ensures unparalleled strength and resistance.
Aluminum thermal group Pinasco SLAVE reed valve (162cc) for Vespa 125 PX T5
Vespa PX 125 T5 VNX5T
Vespa PX 125 T5 Elestart VNX5T
Racing thermal unit for Vespa T5 made of aluminum with Nikasil coating. Completely modified and renewed compared to the historic Pinasco cylinder for Vespa T5, it features new transfer ports, an enlarged exhaust with booster, and a head with centering bushings; to reduce operating temperatures, a special brass head gasket is provided. Master version with traditional intake. -Aluminum casting with galvanic NiCaSil coating -Displacement 162cc -Bore 63mm -Stroke 52mm -Central spark plug head with 8 studs -Flanged exhaust with Booster Applications: Vespa T5 125.
Vespa 125/150 Sprint V-PX-TS
Calibration--> 140-BE5-96, jet min 45/140
Rear shock absorber Pinasco for Vespa 50/90/125/150/160/180/200 N-L-R-Special-Primavera-GT-GTR-Sprint-Rally-PX-PE
Vespa 50 V5A1T N,L,R
Vespa 50 Special V5A2>3T
Vespa 50 Special V5B1>4T
Vespa 90 V9A1T
Vespa 125 Primavera VMA1T>2T
Vespa 125 Primavera ET3 VMB1T
Vespa 125 VNB4T 114714 >
Vespa 125 Super VNC1T
Vespa 125 GT VNL2T
Vespa 125 GTR VNL2T
Vespa 125 TS VNL3T
Vespa 125 PX
Vespa 150 VBB2T 172370 >
Vespa 150 GL VLA1T
Vespa 150 PX
Vespa 150 Sprint VLB1T
Vespa 150 Sprint Veloce VLB1T
Vespa 180 Rally VSD1T
Vespa 200 Rally VSE1T
Vespa
Double-acting oleo-pneumatic shock absorber with spring preload
adjusted by aluminum micrometric ring, calibrated harmonic steel spring.
Body: black, spring: yellow
Pinasco Clutch Disc Kit for Vespa 125/150 VNB-GT-GTR-TS-PX-VBB-GL-Sprint-Sprint Veloce
Vespa 125 VNB/GT/GTR/TS/PX
Vespa 150 VBB/GL/Sprint/Sprint Veloce/PX
Kit Composed of: 3 Cork and Steel Discs
Pinasco thermal group gasket kit (160 cc) for Vespa faro basso 125/150 VM-VN-VL
Vespa 125 VM1T>VM2T
Vespa 125 VN1T>VN2T
Vespa 150 VL1T>VL3T
Primary couple with extended ratio Pinasco (Z 24/63) for Vespa 200 PX-Rally-Cosa
Vespa 200 Rally VSE1T
Vespa P 200 E VSX1T
Vespa PX 200 E VSX1T
Vespa PX 200 E Rainbow VSX1T
Vespa PX 200 E Rainbow Elestart VSX1T
Vespa 200 PE VSX1T Millennium '98
Complete set of shock absorbers
Vespa 125 Primavera VMA1>2T
Vespa 125 Primavera ET3 VMB1T
Note--> Complete with brackets and bolts
Specific for Zuera RR-VTR Thermal Groups
Primary transmission pair Pinasco z24 on bell 72 for Vespa 50/125 Special-Primavera-ET3
Vespa 50 V5A1T N,L,R
Vespa 50 PK
Vespa 90 V9A1T
Vespa 125 Primavera VMA1>2T
Vespa 125 Primavera ET3 VMB1T
Z 24 X 72 with straight teeth
with shock absorber
Pinasco racing piston ø 60 / 1 ring - graphite-coated-selection A for Vespa 50 Special-N-L-R/90/125 Primavera ET3-PK-ETS
Vespa 125 Primavera VMA1>2T
Vespa 125 Primavera ET3 VMB1T
Vespa 125 ETS
Vespa 125 PK
For thermal group Zuera 144cc
our code 07-GA-057-PI - 07-GA-056-PI
Selection A
Primary transmission gear Pinasco z27 on 69 bell for Vespa 50/125 Special-Primavera-ET3
Vespa 50 V5A1T N,L,R
Vespa 50 PK
Vespa 90 V9A1T
Vespa 125 Primavera VMA1>2T
Vespa 125 Primavera ET3 VMB1T
Z 27 X 69 with straight teeth
with shock absorber
Pinasco Carburetor 24/24 ER MIX for Vespa 125/150/200 GT-GTR-TS-PX-VNB
Vespa 125 GT VNL2T
Vespa 125 GTR VNL2T
Vespa 125 TS VNL3T
Vespa 125 PX
Vespa 150 Sprint VLB1T
Vespa 150 Sprint Veloce VLB1T
Vespa 150 PX
Racing Version
Master engine kit rotary valve 251cc for Vespa 125/150/200 GT-GTR-TS-Sprint-PX
Vespa 125/150/200 GT-GTR-TS-GL-Sprint-PX
The first Plug & Play kit to increase the displacement of your large frame Vespa up to 251cc. Made in 2 specific configurations "Master" Rotary Valve and "Slave" Reed Valve, the kit includes all the accessories for the correct assembly of the engine casing, 251cc thermal group, keyed crankshaft, specific keyed clutch and soon the Flytech Tuning ignition and the dedicated Touring Classic exhaust.
The performance is of the highest level, the reed valve version with Dellorto PHBH 30 carburetor and Touring Classic exhaust exceeds 30HP at the wheel but with a smooth and gritty delivery.
Carburation kit PX Euro 1-2 for SI 20/20 carburetors (177cc modification)
Vespa 80/125/150
For carburetors type SI 20
Pinasco 30mm reed valve intake manifold SLAVE crankcase for Vespa 125/150 PX-Sprint-GT-GTR
Vespa 125/150 PX-Sprint-GT-GTR
Crankshaft kit with "bull clutch" 57 stroke for Vespa 125/150 PX-Sprint Veloce
Vespa 125 PX VNX1>2T
Vespa 125 PX ZAPM 74100
Vespa 125 TS VNL3T 18139>
Vespa 125 GTR VNL2T 145901>
Vespa 125 Cosa VNR1T
Vespa 150 Cosa VLR1T
Vespa 150 Sprint Veloce VLB1T 294260>
Vespa 150 Super VBC1T 412374>
Vespa 150 PX 2011 ZAPM 74200
Stroke 57 mm
Thermal Group Kit with Long Stroke Crankshaft Pinasco 60 mm (225 cc) for Vespa 200 PX-PE-Rally-Cosa
Vespa 200 Rally VSE1T
Vespa 200 PE VSX1T
Vespa 200 Cosa VSR1>2T
Vespa 200 PE VSX1T Millennium '98