Pinasco
Vespa 200 Rally VSE1T>0033996
Race 60
Complete thermal group Pinasco (177cc) in Cast Iron with central spark plug
Vespa 125 PX
Vespa 125 GT/GTR/TS
Vespa 150 PX
Vespa 150 Sprint Veloce
Bore: 63
Displacement: 177cc
Stroke: 57
Complete Pinasco piston (Sel.B) for low headlight thermal group (160 cc) for Vespa low headlight 125/150 VM-VN-VL
Vespa 125 VM1T>VM2T
Vespa 125 VN1T>VN2T
Vespa 150 VL1T>VL3T
Pinasco reed valve kit for reed valve 160 CC cylinder kit Vespa 125 VM/VN/-150 VB1T/VL
Vespa 125 VM/VN-150 VL-VB1T
Vespa 50/80/90/125/150/160/180/200
Primary transmission gear pinion z16 on clutch bell z69 for Vespa 50 Special
Vespa 50 Special V5B3T
Main feature: Extends the gear ratio without the need to disassemble the clutch bell, increasing speed by 10 km/h
Vespa 200 Rally VSE1T
Vespa P 200 E VSX1T
Vespa PX 200 E VSX1T
Vespa PX 200 E Rainbow VSX1T
Vespa PX 200 E Rainbow Elestart VSX1T
Vespa 200 PE VSX1T Millennium '98
Vespa 200 Cosa VSR1T
Kit composed of: engine housing, complete reed valve pack, studs, silent block.
Made by die-casting, it has significant improvements compared to the original:
-Enlarged flywheel side bearing
-Material reinforcements at the transfer ports
-Enlarged intake valve
Clutch gear 8/12 springs Pinasco Z 22 dd for elastic gear 63 teeth Vespa 200-PX-PE-Rally
Vespa 200 PE
Vespa 200 Rally
Straight-tooth gear & bull clutch Pinasco
Pinasco straight-tooth cush drive gear Z 64 for Vespa 200 Rally/PX-PE-Cosa
Vespa 200 PE VSX1T
Vespa 200 Rally VSE1T
Vespa 200 PE VSX1T Millennium '98
Pinasco Bull Clutch bush/keyed hub for Vespa PX125/150/200 E '95->/'98/MY/'11/Cosa 2
Vespa 125 VNB/GT/GTR/TS/PX
Vespa 150 VBB/GL/Sprint/Sprint Veloce/PX
Vespa 200 PE
Carburetor sleeve Pinasco d.22 for Vespa low light 125/150 VM-VN-VL
Vespa 125 VM1T>VM2T
Vespa 125 VN1T>VN2T
Vespa 150 VL1T>VL3T
A new Pinasco product is added to the wide range of products for Vespa Farobasso, the Ø 22 carburetor kit. The kit is already calibrated for the Vespa Farobasso and only requires adjustment of the main jet. The package contains all the accessories
necessary for installation, including a specific foam air filter that fits perfectly into the carburetor compartment without modifying any original elements. The Pinasco carburetor kit uses a Dell'Orto carburetor whose calibration components are easily available on the market for optimal carburetion.
Size: 28x36mm
Vespa 200 PE
Vespa 200 rally VSE1T
Vespa 200 Cosa VSR1T
Roller cage included
Notes: Advanced
Stroke 60 mm
From 215cc to 225 cc
Pinasco "SLAVE" reed valve engine casing for Vespa 50/90/125 Primavera ET3 / PK
Vespa 50/90/125 Primavera ET3 / PK
Piaggio Ciao, Piaggio Yes
Advanced version
The Pinasco crankshaft, made of case-hardened steel, chrome-plated, advanced and polished on the intake side, guarantees high performance in all driving conditions
High-speed Pinasco crankshaft bearing kit for Vespa 125/150/200 GTR-TS-PX-Super-Sprint Veloce
Vespa 125 GTR VNL2T 145901>
Vespa 125 PX
Vespa 125 TS VNL3T 18139>
Vespa 150 Super VBC1T 412374>
Vespa 150 Sprint Veloce VLB1T 0294260>
Vespa 150 PX
Vespa 200 PE
Flywheel side: 25x38x15
Clutch side: 25x62x12
Piaggio Ciao
Bore: 46 mm
Displacement: 75 cc
Piston pin: 12 mm
Complete thermal group Pinasco Vespone RB Booster (177cc) in aluminum with central spark plug
Vespa 125 PX
Vespa 125 GT/GTR/TS
Vespa 150 PX
Vespa 150 Sprint Veloce
Bore: 63
Displacement: 177cc
Stroke: 57 mm
Vespa 125 GT VNL2T
Vespa 125 GTR VNL2T
Vespa 125 TS VNL3T
Vespa 125 PX
Vespa 150 Sprint VLB1T
Vespa 150 Sprint Veloce VLB1T
Vespa 150 PX
Vespa 200 PE
The brand new Pinasco SI 28 ER carburetor DOES NOT USE original air filters; volumetric sponge for air filters must be used inside the rubber sleeve.
Front shock absorber Pinasco for Vespa 50/125 Special-PK-PK XL-Primavera-ET3
Vespa 50 V5A1T N,L,R
Vespa 50 Special V5A2>3T
Vespa 50 Special V5B1>4T
Vespa 90 V9A1T
Vespa 125 Primavera VMA1T>2T
Vespa 125 Primavera ET3 VMB1T
Vespa 50 PK/S/XL
Double-acting oleo-pneumatic shock absorber with spring preload adjusted by aluminum micrometric ring, calibrated harmonic steel spring. Body: black, spring black.
Vespa 50/90/125 Primavera ET3
Oversized Pinasco clutch cover for Vespa 125 125 VNA-TS/150 VBA-Super/Rally/PX80-200/PE/Lusso/Cosa/T5
Vespa VNA-TS/150 VBA-Super/Rally/PX80-200/PE-Lusso/Cosa/T5
The Pinasco Oversized Clutch Cover allows the installation of all commercially available full billet clutches without needing to work on its interior; on the
outer perimeter of the cover, there are cooling fins that dissipate the heat of the centrifuged clutch oil that settles on the surface and then falls back, cooler, into the engine casing. The airflow acting on the fins is generated by the rotation of the rear wheel.
Vespa 125 GT VNL2T
Vespa 125 GTR VNL2T
Vespa 125 TS VNL3T
Vespa 125 PX
Vespa 150 Sprint VLB1T
Vespa 150 Sprint Veloce VLB1T
Vespa 150 PX
Racing Version
Main jet size: 122
Vespa PX 125 T5 VNX5T
Vespa PX 125 T5 Elestart VNX5T
Pinasco Carburetor - dell' Orto PHBL Ø 24 for Vespa 50/90/125/150/200 Special-GT-GTR-TS-PX-GL-ET3
Adaptable to all models / All Models
Base gasket for Pinasco thermal group (225 cc) for Vespa 200 PE-Rally-Cosa
Vespa 200 Rally VSE1T
Vespa 200 PE VSX1T
Vespa 200 Cosa VSR1>2T
Vespa 200 PE VSX1T Millennium '98
Vespa 200 Rally VSE1T
Vespa 200 PE VSX1T
Vespa 200 Cosa VSR1>2T
Cylinder made of Aluminum alloy with Nicasil coating that ensures unparalleled strength and resistance.
Pinasco carburetor d.22 for Vespa low headlight 125/150 VM-VN-VL
Vespa 125 VM1T>VM2T
Vespa 125 VN1T>VN2T
Vespa 150 VL1T>VL3T
A new Pinasco product is added to the wide range of products for Vespa Farobasso, the Ø 22 carburetor kit. The kit is already calibrated for the Vespa Farobasso and only requires adjustment of the main jet. The package contains all the accessories
necessary for assembly, including a specific foam air filter that fits perfectly in the carburetor compartment without modifying any original elements. The Pinasco carburetor kit uses a Dell'Orto carburetor whose calibration components are easily available on the market for optimal carburetion.
Power Clutch Kit 2.0 forged 6 springs Pinasco for Vespa 125 VM1T/VM2T-VN1T-VN2T-VL-VB1T
Vespa 125 VM1T
Vespa 125 VM2T
Vespa 125 VN1T
Vespa 125 VNA1T
Vespa 125 VN2T
Vespa 150 VL1T
Vespa 150 VL2T
Vespa 150 VL3T
Vespa 150 VB1T
Vespa 150 VBA1T
Pinasco primary transmission gear z27 on bell 69 for Vespa 50/125 Special-Primavera-ET3
Vespa 50 V5A1T N,L,R
Vespa 50 PK
Vespa 90 V9A1T
Vespa 125 Primavera VMA1>2T
Vespa 125 Primavera ET3 VMB1T
Pinasco has developed a new clutch bell specifically for Vespa Small Frame racing, capable of withstanding the stress created by engine performance increases. Completely machined from solid, the new Pinasco Racing Clutch Bell has the advantage of being more resistant than the stamped one due to the use of carbon steel and the increased support surface of the clutch discs.
Equipped with a specific removable and serviceable shock absorber, the new Pinasco Racing Clutch Bell with straight teeth is a high-tech component that is easy to install.
Vespa PE 200
Vespa 200 Rally VSE1T
Vespa 200 Cosa
Painted in black
Pinasco touring classic 2.0 exhaust for Vespa 200 Rally/PE
Vespa PE 200
Vespa 200 Rally VSE1T
Painted in black
The PINASCO TOURING muffler has been designed to enhance the engine's performance both at low and high revs while maintaining the same level of quietness. The innovative design that “breaks all current patterns” has been studied to achieve the right gas expansion, which significantly increases engine performance (about 4HP) even at full stretch.
Pinasco "Zuerino" SVR Thermal Group (102cc) for Vespa 50 PK (manifold Ø19-19)
50 HP
The Pinasco 102cc SRV "Zuerino" Ø 55mm thermal group is a new product dedicated to the world of Vespa 50 with a 43mm stroke.
Based on the famous Zuera 135cc, the 102cc SRV "Zuerino" features a transfer system very similar to its bigger brother, uses the same RD350 type reed valve pack and the same flow guide, mounts a single-ring piston with bi-conical pin, the new central spark plug head with 8 studs and centering bushings that definitively eliminates the problem of leaks and consequent performance drops with a compression ratio of 12.3:1.
The Pinasco 102cc SRV is a copious engine designed to make the most of power at low revs, its exhaust port has been designed to work correctly with original exhausts and stamped mufflers
commonly called "bananas" but can also be used in
more advanced setups.
It does not require special modifications to the engine case, it can be used with
all crankshafts on the market including the original ones, its
installation allows the use of engine
Vespa 50/90/125 Primavera ET3
Material: Aluminum
Application: Carburetors 22/24
Vespa 125 VNA1>2T
Vespa 125 VNB1>6T
Vespa 125 GT/GTR/TS/Super
Vespa 125 PX
Vespa 150 VBA1T
Vespa 150 VBB1>2T
Vespa 150 Sprint/GL/Super
Vespa 150 PX
Painted in black
Complete thermal group with two aluminum transfers Pinasco Magni Cours S2S (177cc) 8 studs central spark plug for Vespa 125 VNB/Super/GT/GTR-150 VBA1T/VBB/GL/Super/Sprint
Vespa 125 VNB1>6T
Vespa 125 GT VNL1>2T
Vespa 125 GTR VNL2T
Vespa 150 VBA1T
Vespa 150 VBB1>2T
Vespa 150 GL VLA1T
Vespa 150 Sprint VLB1T
Aluminum fusion with NiCaSil galvanic coating
-Displacement 177cc
-Bore 63mm -Stroke 57mm
-Central spark plug head 8 studs
-Classic Exhaust
Vespa 125 PX VNX1>2T
Vespa 125 PX ZAPM 74100
Vespa 125 TS VNL3T 18139>
Vespa 125 GTR VNL2T 145901>
Vespa 125 Cosa VNR1T
Vespa 150 Cosa VLR1T
Vespa 150 Sprint Veloce VLB1T 294260>
Vespa 150 Super VBC1T 412374>
Vespa 150 PX 2011 ZAPM 74200
Stroke 57 mm
Vespa 200 PE
Vespa 200 rally VSE1T
Vespa 200 Cosa VSR1T
Included roller cage
Stroke 62 mm
Displacement: from 225cc to 235cc
Pinasco long stroke (57 mm) advanced crankshaft for Vespa 200 PX-PE
Vespa 200 PE
Vespa 200 rally VSE1T
Vespa 200 Cosa VSR1T
Roller cage included
Note: Advanced
57 mm stroke
Clutch gear group 6 springs Pinasco Z22 on primary Z64 for Vespa 80-125-150-200 PX PE-GT-GTR-SPRINT-V-TS-GL-RALLY
Vespa 80-125-150-200 PX PE-GT-GTR-SPRINT-V-TS-GL-RALLY
For clutch 6 springs d. 97 mm
Complete Pinasco "shot clutch" for Vespa 50 Special-N-L-R/90/125 Primavera ET3-PK-ETS
Vespa 50 V5A1T N,L,R
Vespa 50 Special V5A2>3T
Vespa 50 Special V5B1>4T
Vespa 50 PK
Vespa 50 PK XL
Vespa 90 V9A1T
Vespa 125 Primavera VMA1>2T
Vespa 125 Primavera ET3 VMB1T
Vespa 125 PK
Pinasco has created the first clutch for Vespa Small Frame using motorcycle-derived aluminum die-casting. Supplied with multi-tooth steel plates that distribute the engine's power around the entire perimeter of the clutch through 10 calibrated springs, the Pinasco "Shot Clutch" is very smooth and adjustable yet extremely durable and reliable. Designed to be mounted with special Pinasco sintered discs for racing use, the Pinasco "Shot Clutch" completes the range of products for Vespa Small Frame.
The Pinasco "Shot Clutch" is recommended not only for high-performance engines but also as a replacement for the original clutch for everyday use.
For clutch installation, the use of the specific Pinasco tool is necessary.
THIS MODEL DOES NOT INCLUDE THE PINASCO TOOL (26075001).