Pinasco
Vespa 125 GT VNL2T
Vespa 125 GTR VNL2T
Vespa 125 TS VNL3T
Vespa 125 PX
Vespa 150 Sprint VLB1T
Vespa 150 Sprint Veloce VLB1T
Vespa 150 PX
Racing Version, calibration--> 160-BE53-118, minimum jet 60/160
Pinasco engine casing with 57 stroke crankshaft for Vespa faro basso 125/150 V1
Vespa 125 V1>15T
Vespa 125 V30>33T
Vespa 125 VM1T>VM2T
Vespa 125 VN1T>VN2T
Vespa 150 VL1T>VL3T
Vespa 150 VB1T
Have you ever wondered what a Vespa engine from the 50s would be like
produced with 2020 technology? Pinasco can finally give you the
answer you've been waiting for with the new engine casing dedicated to the world of
"grandmothers". Die-casting technology, steel sliding track inserts,
engine casing closure with studs,
new gearbox shaft bearings, crankshaft enlarged by +7mm in
width compared to the original, reed valve intake (optional),
preparation for 4-speed gearbox, high-speed main bearings,
operating with 2% mixture.
All this without modifying the aesthetics of the engine, the external walls have NOT been sandblasted to maintain the color and raw style of the historic engines, the logos
have been placed in hidden areas and with period fonts, to have a modern product but as similar as possible to the original.
The new Pinasco Wide Frame Engine Casing allows using the Vespa
Old exactly like the more modern ones with high performance and
reliability.
Fits VL3T components or higher.
Pinasco 2.0 lightweight flywheel for Piaggio mopeds with electronic ignition
Yes-Hello-Bravo (only for models originally equipped with electronic ignition)
NEW Pinasco Flywheel for Piaggio Moped (Ciao, Si, Bravo, Boxer,
Grillo) with electronic ignition. The superlight flywheel of 600g.
Entirely made of aluminum with a steel reinforcement ring. Compared to the
previous version, the flywheel is no longer co-molded in nylon. The new
Pinasco Moped flywheel is coated and painted with a โCarbon
Lookโ effect.
Complete Master Engine Crankcase "Valve" 2.0 for Vespa 200 PX-PE-Rally
Vespa 200 Rally VSE1T
Vespa P 200 E VSX1T
Vespa PX 200 E VSX1T
Vespa PX 200 E Arcobaleno VSX1T
Vespa PX 200 E Arcobaleno Elestart VSX1T
Vespa 200 PE VSX1T Millennium '98
Vespa 200 Cosa VSR1T
How many times have you been stranded with your Vespa due to the clutch side oil seal? How many times have you thrown up your hands in surrender because the oil seal slips out of its seat? How many times have you damaged the bearing seat due to the extremely hard clutch springs and engine performance?
Pinasco, always seeking solutions to the most common problems of modified Vespas, offers a solution to this inconvenience by updating the clutch bench of its engine casing with the new 2.0 model.
Thanks to the new fixing system using 3 steel plates, the specific Pinasco oil seal is locked between the casing and the main bearing without the possibility of coming out of its seat. The plates ensure perfect bearing registration, eliminating the play that often forms between circlip and bearing. The safety clips guarantee the total locking of the entire system.
The new bearing seat has been further reinforced with the addition of 3 new ribs that ensure the support and sealing of the entire engine bench, and 2 reinforcement ribs have been added on the cluster shaft.
The crank chamber is bored to accommodate crankshafts with larger shoulders.
The die-casting technique used for the casing guarantees superior strength
Pinasco air filter box for Vespa 50 N L R-Special-90-125 Primavera ET3-PK
Vespa 50 N L R-Special-90-125 Primavera ET3-PK
Dimension
Fits perfectly with Dellorto SHB-SHBC carburetors
Vespa 50 V5A1T N,L,R
Vespa 50 Special V5A2>3T
Vespa 50 Special V5B1>4T
Vespa 50 PK
Vespa 50 PK XL
Vespa 90 V9A1T
Vespa 125 Primavera VMA1>2T
Vespa 125 Primavera ET3 VMB1T
Vespa 125 PK
The Pinasco Power Clutch kit is 100% interchangeable with the original, includes 12 reinforced springs, cork discs, dedicated clutch plate, and basket.
White Siluro Exhaust '79 Pinasco with resonator for Vespa 50 N-L-R/Special
Vespa 50 V5A1T N,L,R
Vespa 50 Special V5A2>3T
Vespa 50 Special V5B1>4T
Vespa 90 V9A1T
It includes the original exhaust pipe with resonator (expansion chamber) that produces the unmistakable "SOUND".
The muffler is treated with ceramic resistant up to 800ยฐC, finally the logo has remained unchanged since the 70s.
Flywheel side roller main bearing Pinasco for Vespa 125/160/180 T5-Rally-GS-SS
Vespa 125 PX T5
Vespa 160 GS VSB1T
Vespa 180 Rally VSD1T
Vespa 180 SS VSC1T
Vespa 200 Rally VSE1T
Vespa 125 T5 VNX5T
Vespa 125 T5 Elestart VNX5T
Painted in black
The PINASCO TOURING exhaust has been designed to enhance engine performance both at low and high revs while maintaining unchanged quietness. The innovative design that โbreaks all current normsโ has been studied to achieve the right gas expansion that allows a significant increase in engine performance (about 4HP) even in extension.
Pinasco crankshaft with advanced timing (stroke 52 mm) for Vespa 125 T5 VNX5T
Vespa PX 125 T5 VNX5T
Vespa PX 125 T5 Elestart VNX5T
Pinasco Factory Crankshaft Stroke 62mm Connecting Rod 127mm for Vespa PE PX COSA 200Vespa 200 Rally VSE1T 33997 ->/P200E /PX200 E/MY/Cosa
Vespa 200 Rally VSE1T
Vespa 200 PE VSX1T
Vespa 200 Cosa VSR1>2T
Vespa 200 PE VSX1T Millennium '98
Pinasco 252cc Endurance Master Aluminum Thermal Group for Vespa 200 Rally/P200E/PX200 E/'98/MY/Cosa
Vespa 200 Rally/โP200E/โPX200 E/โ'98/โMY/โCosa
252cc Thermal Group Kit โ Plug & Play Installation for Vespa PX 200
This 252cc thermal group kit is designed for a "plug and play" installation on all Vespa PX 200cc engines, with no need for invasive modifications.
The 252cc displacement is achieved thanks to a 72mm piston combined with a crankshaft with a 62mm stroke and a 127mm connecting rod (not included in the kit).
To simplify assembly, the classic cylinder "collar" has been eliminated, making engine casing boring unnecessary.
The performance is excellent, with a surprising torque delivery and extremely smooth operation, free of vibrations. This kit is designed for touring use and does not require particular technical skills for installation.
The thermal group is compatible with both casing and cylinder admission.
Technical Specifications
Material: Aluminum
Bore: ร72mm
Stroke: 62mm
Displacement: 252cc
Head: Central hole
Squish: 1.6โ1.8mm
Piston
Complete thermal group two transfers in Aluminum Pinasco (177cc) for Vespa 125 VNB/Super/GT/GTR-150 VBA1T/VBB/GL/Super/Sprint
Vespa 125 VNB1>6T
Vespa 125 GT VNL1>2T
Vespa 125 GTR VNL2T
Vespa 150 VBA1T
Vespa 150 VBB1>2T
Vespa 150 GL VLA1T
Vespa 150 Sprint VLB1T
Bore: 63 mm
Displacement: 177cc
Stroke: 57 mm
Starter gear with Pinasco spring for Vespa 125/150 VM/VN/VL/VB/GS-26271922
Vespa 98, Vespa 125 V1T > V15T, Vespa 125 VN1T> VN2T, Vespa 125 VM1T > VM2T, Vespa 125 V30T > V33T, Vespa 150 VL1T > VL3T, Vespa 150 GS VS1T > VS3T
Vespa 125/150 PX
Chromed, with Chrome Steel Silencer
Complete Crankshaft Advanced Pinasco for Vespa 125/150 VNB-GT-GTR-Sprint-GL
Vespa 125 VNB1>6T
Vespa 150 VBA1T
Vespa 150 VBB1>2T
Vespa 150 GL VLA1T
Stroke: 60 mm
Maximum performance even on completely Original engines, intake shoulder anticipated and mirror polished optimizing fluid dynamics.
Base included
Vespa 98 V98T Front and rear
Vespa 125 V1>11T>24000 Front and rear
Vespa 125 V12T>15T
Vespa 125 V30>33T
Vespa 125 VM1>2T
Vespa 125 U VU1T
Vespa 125 VN1>2T
Vespa 125 VNA1>2T
Vespa 125 VNB1>6T
Vespa 150 VL1>2T
Vespa 98 V98T Front and rear
Vespa 125 V1>11T>24000 Front and rear
Vespa 125 V12T>15T
Vespa 125 V30>33T
Vespa 125 VM1>2T
Vespa 125 U VU1T
Vespa 125 VN1>2T
Vespa 125 VNA1>2T
Vespa 125 VNB1>6T
Vespa 150 VL1>2T
Vespa 125 GT VNL2T
Vespa 125 GTR VNL2T
Vespa 125 TS VNL3T
Vespa 125 PX
Vespa 150 Sprint VLB1T
Vespa 150 Sprint Veloce VLB1T
Vespa 150 PX
Vespa 200 PE
Brand new Pinasco SI 28 VRX-R carburetor with recalculated intake trumpet made from solid material, optimizes performance to the maximum even at low revs, complete with volumetric sponge.
Vespa 125 PX
Vespa 125 GT/GTR/TS
Vespa 150 PX
Vespa 150 Sprint Veloce
Bore: 63
Displacement: 177cc
Stroke: 57
Notes: Remarkable torque and low consumption.
Vespa 50/80/90/125/150/160/180/200
Measurement--> 2.10-10", o'ring and bolts included
Thermal Group Kit and Pinasco Long Stroke 60 mm Crankshaft (190 cc)
Vespa 125 PX
Vespa 125 GT/GTR/TS
Vespa 150 PX
Vespa 150 Sprint Veloce
Bore: 63 mm
Displacement: 190 cc
Stroke: 60 mm
Rubber intake manifold for PHBH/VHST carburetor for Vespa 50/90/125/150/200 Special-GT-GTR-TS-PX-GL-ET3
Adaptable to all models / All Models
Inlet--> 34 mm
Rear shock absorber Pinasco for Vespa 50/90/125/150/160/180/200 N-L-R-Special-Primavera-GT-GTR-Sprint-Rally-PX-PE
Vespa 50 V5A1T N,L,R
Vespa 50 Special V5A2>3T
Vespa 50 Special V5B1>4T
Vespa 90 V9A1T
Vespa 125 Primavera VMA1T>2T
Vespa 125 Primavera ET3 VMB1T
Vespa 125 VNB4T 114714 >
Vespa 125 Super VNC1T
Vespa 125 GT VNL2T
Vespa 125 GTR VNL2T
Vespa 125 TS VNL3T
Vespa 125 PX
Vespa 150 VBB2T 172370 >
Vespa 150 GL VLA1T
Vespa 150 PX
Vespa 150 Sprint VLB1T
Vespa 150 Sprint Veloce VLB1T
Vespa 180 Rally VSD1T
Vespa 200 Rally VSE1T
Vespa
Double-acting oleo-pneumatic shock absorber with spring preload
adjusted by millimeter aluminum ring nut, calibrated harmonic steel spring.
Body: black, spring black
Pinasco touring classic 2.0 exhaust for Vespa 125/150 VNB-GT-GTR-TS-Sprint-GL-PX
Vespa 125 VNA1>2T
Vespa 125 VNB1>6T
Vespa 125 GT/GTR/TS/Super
Vespa 125 PX
Vespa 150 VBA1T
Vespa 150 VBB1>2T
Vespa 150 Sprint/GL/Super
Vespa 150 PX
Painted in black
The PINASCO TOURING exhaust has been designed to enhance the engine's performance both at low and high revs while maintaining the same level of quietness. The innovative design that "breaks away from all current patterns" has been studied to achieve the right gas expansion that allows for a significant increase in engine performance (about 4HP) even in extension.
Elastic band ร 57.5 mm for Pinasco zuera in aluminum (135 cc) for Vespa 50 Special V5B3T/90 V9A1T-125 Primavera ET3-PK
Vespa 125 Primavera VMA1>2T
Vespa 125 Primavera ET3 VMB1T
Vespa 125 ETS
Vespa 125 PK
All models
Useful accessory for turning cylinder heads. Suitable for any type of head.
Vespa 50 V5B1>3T
Vespa 50 V5SS1>2T
Vespa 50 PK
Vespa 90 V9A1T
Vespa 125 Primavera VMA1T>2T
Vespa 125 Primavera ET3 VMB1T
Vespa 125 GT VNL2T
Vespa 125 GTR VNL2T
Vespa 125 TS VNL3T
Vespa 150 GS VS5T 0047351>
Vespa 150 GL VLA1T
Vespa 150 Sprint VLB1T
Vespa 150 Sprint Veloce VLB1T
Vespa 160 GS VSB1T
Vespa 180 SS VSCT
Vespa 180 Rally VSD1T
Vespa 200 Rally VSE1T
Vespa PX
Vespa PE
Size: 2.10x10
TUV approved, in case of puncture it is possible to mount a traditional inner tube without making any modifications.
Vespa 125 GT VNL2T
Vespa 125 GTR VNL2T
Vespa 125 TS VNL3T
Vespa 125 PX
Vespa 150 Sprint VLB1T
Vespa 150 Sprint Veloce VLB1T
Vespa 150 PX
Vespa 200 PE
Recalculated and solidly derived cornet, specifically designed to improve engine performance, especially at low revs, thanks to the "Venturi effect".
Clutch side oil seal in NBR specific for Pinasco 2.0 Vespa P200E/PX200 E/Lusso/'98/MY for Vespa 125 VNA-TS/150 VBA-Super/160 GS/180 SS/Rally/PX80-150/PE/T5
Vespa 125/150/200 PX
Pinasco crankshaft with advanced timing (60 mm stroke, 105 mm connecting rod) for Vespa 125/150 PX
Vespa 125 PX VNX1>2T
Vespa 125 PX ZAPM 74100
Vespa 125 TS VNL3T 18139>
Vespa 125 GTR VNL2T 145901>
Vespa 125 Cosa VNR1T
Vespa 150 Cosa VLR1T
Vespa 150 Sprint Veloce VLB1T 294260>
Vespa 150 Super VBC1T 412374>
Vespa 150 PX 2011 ZAPM 74200
Complete carburetor Pinasco 26/26H (with starter) for Vespa 125/150/200 Cosa 1-2
Vespa 125 Cosa VNR1T
Vespa 125 Cosa 2 VNR2T
Vespa 150 Cosa VLR1T
Vespa 150 Cosa 2 VLR2T
Vespa 200 Cosa VSR1T
The Pinasco special series of carburetors has been developed for the racing world and for the most demanding tuners. The modifications made to the Pinasco carburetors increase the carburetor's performance and allow for more efficient and precise carburetion. All Pinasco carburetors marked with the letter R have internally CNC-machined fuel passages that ensure optimal fuel flow and eliminate the fuel void effect; even the float cover is entirely machined in the passages ensuring perfect filling of the bowl. In the SI 26/26 R series, the Venturi has been further machined to increase the nominal diameter and obtain the maximum size of 26.00mm instead of the 25.40mm size of the economic version. The R carburetor, as far as the SI series is concerned, represents the TOP of the range and an exclusive Pinasco.
Pinasco base gasket thickness of 1.5 mm for modifying the Pinasco 177cc aluminum cylinder from three to two ports for Vespa 125 VBA/VBB/VNB-150 VBA/VBB/GL/Sprint
Vespa 125 VBA/VBB/VNB-150 VBA/VBB/GL/Sprint
Primary couple with extended ratio Pinasco (Z 23/65) for Vespa 125/150 VNB-GT-GTR-TS-PX-VBB-GL-Sprint-Sprint Veloce
Vespa 125 PX, Vespa 125 TS, Vespa 150 PX, Vespa 150 Sprint Veloce
Included: Shock absorbers
Z 23-65 with helical teeth
Pinasco 2.0 forged clutch bell for Vespa 125/150 VNB-GT-GTR-TS-PX-Sprint-GL
Reinforced with a special steel ring carefully welded onto the outer petals of the clutch.
The stops of the discs are hardened and subsequently burnished.
Pinasco competition full circle crankshaft cone 20 for Vespa 50/90/125 Primavera-ET3-PK
Vespa 125 Primavera VMA1T>2T
Vespa 125 Primavera ET3 VMB1T
Vespa 125 PK S/XL/N/HP
Cone 20 mm / Cone 20 mm
Stroke 51 rod 97
Range of extremely high-performance crankshafts, dedicated to fast touring and competitions. The PINASCO COMPETITION crankshafts
are alongside the classic production and differ for:
- more aggressive intake degree
- new fluid dynamics of the intake cut
- new racing imbalance obtained with tungsten inserts
- innovative Teflon inlays to increase the internal pressure of the crankcases from the lowest revs
The PINASCO COMPETITION crankshaft significantly increases power and maximum torque from low revs, the engine's rotational speed increases, improving overall performance.
Light Clutch Kit 6 Springs Pinasco for Vespa 125/150 VNB-GT-GTR-TS-PX-VBB-GL-Sprint-Sprint Veloce
Vespa 125 VNB/GT/GTR/TS/PX
Vespa 150 VBB/GL/Sprint/Sprint Veloce/PX
Kit Composed of: Reinforced and tempered basket, cork and steel discs, reinforced springs with perforated cups.
Pinasco lamellar thermal group in aluminum (160 cc) for Vespa low headlight 125/150 VM-VN-VL
Vespa 125 VM1T>VM2T
Vespa 125 VN1T>VN2T
Vespa 150 VL1T>VL3T
After the success of the first aluminum thermal unit for Vespa "Farobasso", Pinasco continued development in this field and is now pleased to present the new 160cc thermal unit for Vespa "Farobasso" / 5% cylinder reed valve. Perfectly
interchangeable with the original thermal unit, it keeps the aesthetics unchanged and substantially increases the vehicle's performance. Thanks to the reed valve intake, the "rejection" problems of classic "Piston Port" are eliminated, making the engine even more fun and enjoyable to ride. The power and torque increase
even further compared to the previous cylinder while maintaining reliability. The Pinasco 160cc Reed Valve thermal unit brings all Vespa 5% into modernity while retaining all the original components.
Attention: when using VM / VN / ACMA engine cases, the piston skirt must be shortened by approx. 3-4mm.
Pinasco type cross with thread for Vespa 125/150/200 Sprint V-TS-PX-PE-Rally
Vespa 125 GT VNL1>2T 78301>
Vespa 125 GTR VNL2T 124014>
Vespa 125 TS VNL3T
Vespa 125 PX VNX1T>2T > 232052
Vespa 150 Super VBC1T 181687>
Vespa 150 Sprint VLB1T 1.170240>
Vespa 150 Sprint Veloce VLB1T 0169301>
Vespa 150 PX VLX1T > 624301
Vespa 180 Rally VSD1T 0026849>
Vespa 200 Rally VSE1T 004476>
Vespa 200 PE VSX1T > 315266