DRT
DRT z22 gear on primary straight teeth z56 for Vespa 50 N/L/R-Special-90/125/Primavera/ET3/PK50/125/S/XL/N/HP
Vespa 50 V5A1T N,L,R
Vespa 50 PK
Vespa 90 V9A1T
Vespa 125 Primavera VMA1>2T
Vespa 125 Primavera ET3 VMB1T
Clutch Basket Gear DRT Z22 -65 for Vespa PX200 E Lusso '95->/'98/MY/Cosa 2 200
Vespa 200 Cosa VSR1T
Vespa 200 PE VSX1T 1995>
Ø 42 mm
helical 22 teeth
for the primary 65 teeth
clutch: Ø 115mm
Preloaded M8 Washers MD Racing (4pcs) for Vespa 200 PE-Rally-Cosa Studs
Vespa 200 PE-Rally-Thing
Special kit of harmonic steel washers with preload
specifically to compensate for the play due to thermal excursions of Vespa cylinder studs.
These washers are fully compressed at 2 kgm (20 N/m)
(tightening of Vespa studs) which usually falls within the
Piaggio guidelines between 1.7 and 2.2 Kgm
and compensates for the loosening of the studs subjected to heating and elongation.
Dimensions:
internal diameter 8.4 mm
external diameter 18 mm
thickness 2 mm
washer height at rest on average 2.4 mm
average excursion 0.4 mm
1 mm base gasket for thermal group for Vespa 50/90/125 Special-N/L/R-Primavera ET3-PK
Vespa 50 V5A1T N,L,R
Vespa 50 Special V5A2>3T
Vespa 50 Special V5B1>4T
Vespa 90 V9A1T
Vespa 125 Primavera VMA1T>2T
Vespa 125 Primavera ET3 VMB1T
Vespa 125 PK ETS
Vespa PK 50 S/XL/N/HP
Vespa 125 PK
Vespa 50 V5A1T N,L,R (clutch side)
Vespa 50 Special V5A2>3T (clutch side)
Vespa 50 Special V5B1>4T (clutch side)
Vespa 90 V9A1T (clutch side)
Vespa 125 Primavera VMA1T>2T (clutch side)
Vespa 125 Primavera ET3 VMB1T (clutch side)
Vespa PK (clutch side)
Vespa 150 GS VS1T>5T (clutch and flywheel side)
Vespa 180 SS VSC1T (flywheel side)
Dimensions: 3x9.3mm
Vespa 50 V5A1T N/L/R
Vespa 50 Special V5B3T
Vespa 50 PK S/XL/N
Primary transmission pair suitable for a 75cc - 90cc thermal group, without shock absorber.
Vespa 125 Primavera ET3 VMB1T
Vespa 125/150/200 PX/PE
Vespa 200 Rally VSE1T 0033997>
Vespa 50/125 PK-S-XL-N
Extensively tested by DRT, it improves cold start, complete combustion of gases in the combustion chamber, more flexible and responsive engine in every condition.
Attached you will find a legend with all the necessary instructions, a comparative chart, and initial advance settings for optimal adjustment.
17.5° at idle speed - maximum advance at 21° - final delay 19°/18.5°
20.5° at idle speed - maximum advance at 24° - final delay 22°/21.5°
Vespa 50 V5A1T 763501>
Vespa 50 Special V5A2T 60910>
Vespa 50 Special V5B1T
Vespa 50 Special V5B3T
The coil replaces the one for the lights, thanks to a wiring (specified inside the package) it is possible to improve the ignition and, if desired, the possibility of having the stop.
Head thickness 1.5mm for stroke transformation from 57 to 60 for Vespa 125/150 Sprint V-GTR-TS-PX
Vespa 125/150 Sprint V-GTR-TS-PX
Thickness: 1.5mm
Clutch gear group Z23 on primary Z 67/68 complete with bushing, shim, and bell reinforcement for Vespa 125/150 VNB-Super-Sprint
Vespa 125 VNB1>6T
Vespa 125 GT VNL1>2T
Vespa 125 GTR VNL2T
Vespa 125 TS VNL3T
Vespa 125 Super VNC1T
Vespa 150 VBA1T
Vespa 150 VBB1>2T
Vespa 150 GL VLA1T
Vespa 150 Sprint VLB1T
Vespa 150 Sprint Veloce VLB1T
Vespa 150 Super VBC1T
Included cork and metal clutch discs
Vespa 50 V5A1T N,L,R
Vespa 50 Special V5A2>3T
Vespa 50 Special V5B1>4T
Vespa 90 V9A1T
Vespa 125 Primavera VMA1T>2T
Vespa 125 Primavera ET3 VMB1T
Vespa 125 PK ETS
Vespa PK 50 S/XL/N/HP
Vespa 125 PK
DRT clutch gear Z21 on 64 straight teeth for Vespa 125/200 PE-Rally-Cosa-T5
Vespa 125 T5 VNX5T
Vespa 125 Cosa VNR1T
Vespa 125 Cosa 2 VNR2T
Vespa 150 Cosa VLR1T
Vespa 150 Cosa 2 VLR2T
Vespa 180 Rally VSD1T
Vespa 200 Rally VSE1T
Vespa P 200 E VSX1T
Vespa PX 200 E VSX1T
Vespa PX 200 E Arcobaleno VSX1T
Vespa PX 200 E Arcobaleno Elestart VSX1T
Vespa 200 PE VSX1T Millennium '98
Vespa 200 Cosa VSR1T
For primary 23/64 Polini
diameter 107mm (clutch 7 springs)
DRT reinforcement ring for clutch bell 7 springs for Vespa 200 Rally-PE-Cosa
Vespa 200 Rally VSE1T
Vespa P 200 E VSX1T
Vespa PX 200 E VSX1T
Vespa PX 200 E Rainbow VSX1T
Vespa PX 200 E Rainbow Elestart VSX1T
Vespa 200 PE VSX1T Millennium '98
Vespa 200 Cosa VSR1T
Vespa 125 PX VNX1>2T
Vespa 125 PX ZAPM 74100
Vespa 125 TS VNL3T 18139>
Vespa 125 GTR VNL2T 145901>
Vespa 125 Cosa VNR1T
Vespa 150 Cosa VLR1T
Vespa 150 Sprint Veloce VLB1T 294260>
Vespa 150 Super VBC1T 412374>
Vespa 150 PX 2011 ZAPM 74200
Connecting rod: 105 mm, Stroke: 57 mm, Wrist pin: 15 mm, balanced with tungsten.
Vespa 80/100/125/150/200
Preselector thicknesses: 0.3mm/0.4mm/0.5mm
Vespa 50 V5A1T N/L/R
Vespa 50 Special V5A2>3T
Vespa 50 Special V5B1>4T
Vespa 50 PK S/XL/N/HP
Vespa 125 Primavera VMA1>2T
Vespa 125 Primavera ET3 VMB1T
Vespa 125 PK S/XL/N/HP
Complete shim kit for proper alignment of the gearbox, cluster, starter, includes spacers to eliminate any play in the bearing seat. A detailed diagram is included in the package.
DRT pinion primary transmission gear z26 on crown z69 for Vespa Vespa 50/90/125 Special-Primavera-ET3-PK
Vespa 50 V5A1T N,L,R
Vespa 50 PK
Vespa 90 V9A1T
Vespa 125 Primavera VMA1>2T
Vespa 125 Primavera ET3 VMB1T
Vespa 125 PK
It fits perfectly by replacing the original 27-tooth sprocket.
Stator plate coils (wide advance angle variation) for SI-Ciao-Bravo
Yes-Hello-Good
Wide advance angle variation
Simply by rotating the plate, without removing the flywheel.
Clutch gear group Z21 on primary Z67/68 for Vespa 80-125-150-200 PX PE
Vespa 80/100/125/150/200
Tested on primary Z68, it fits perfectly with 7-spring clutches (Diam.107.769mm), it is possible to mount it on 6-spring clutches by turning the disc to 97 mm. It is also possible to mount it on primary 65 teeth DRT.
Vespa 125 VNA1>2T
Vespa 125 VNB1>6T
Vespa 125 Super VNC1T
Vespa 125 GT VNL2T
Vespa 125 GTR VNL2T
Vespa 125 TS VNL3T
Vespa 125 PX
Vespa 125 PX T5 VNXST
Vespa 150 VBA1T
Vespa 150 VBB1>2T
Vespa 150 GL VLA1T
Vespa 150 Super VBC1T
Vespa 150 Sprint VLB1T
Vespa 150 Sprint Veloce VLB1T
Vespa 150 PX
Vespa 200 Rally VSE1T 0033997>
Vespa 200 PE VSX1T
Vespa 200 Cosa VSR1>2T
Vespa 200 PE VSX1T Millennium '98
Stroke 57 mm, Connecting rod 110 mm, full shoulders of 95 mm, balanced with tungsten.
Vespa 125 U VU1T
Vespa 125 VM1T>VM2T
Vespa 125 VN1T>VN2T
Vespa 125 VNA1T>VNA2T
Vespa 125 VNB1T>VNB6T
Vespa 125 Super VNC1T
Vespa 125 GT VNL1T
Vespa 125 GT VNL2T
Vespa 125 GT R VNL2T
Vespa 125 TS VNL3T
Vespa P 125 X VNX1T
Vespa 150 GS VS1T>VS5T
Vespa 150 VL1T>VL3T
Vespa 150 VB1T
Vespa 150 VBA1T
Vespa 150 VBB1T>VBB2T
Vespa 150 GL VLA1T
Vespa 150 Super VBC1T
Vespa 150 Sprint VLB1T
Longer duration, improved recovery, decisive change, overcoming the classic "wall" during the run. The operating temperature will be more contained.
DRT oversized prisoner kit thermal group fastening M7x152 (4 Pcs)
Vespa 125 Primavera VMA1T>2T
Vespa 125 Primavera ET3 VMB1T
Vespa 125 PK S/XL/N/HP
Vespa PX-PE
Practical wrench fastening
Vespa 98
Vespa 125 V1>15T
Vespa 125 V30>33T
Vespa 125 VU1T
Vespa 125 VM1>2T
Vespa 125 VN1>2T
Vespa 125 VNA1>2T
Vespa 125 VNB1>6T
Vespa 125 Super VNC1T
Vespa 125 GT VNL2T
Vespa 125 GTR VNL2T
Vespa 125 ts VNL3T
Vespa 125 PX VNX1T> 2T
Vespa 150 VL1>3T
Vespa 150 VB1T
Vespa 150 VBA1T
Vespa 150 VBB1>2T
Vespa 150 GL VLA1T
Vespa 150 Sprint VLB1T
Vespa 150 Sprint Veloce VLB1T
Vespa
Measurements: 4x15.4 mm
Vespa 125 VNB1T > VNB6T
Vespa 150 VBA1T
Vespa 150 VBB1T > VBB2T
Vespa 125 Super VNC1T
Vespa 125 GT VNL2T
Vespa 125 GTR VNL2T
Vespa 125 TS VNL3T
Vespa 125 PX
Vespa 150 PX
Vespa 150 Super VBC1T
Vespa 150 Sprint VLB1T
Vespa 150 Sprint Veloce VLB1T
Vespa 150 GL VLA1T
In laser-cut steel
Clutch gear Z 24 on primary Z65 for Vespa 180/200 Rally-PX-Cosa
Vespa 180 Rally VSD1T
Vespa 200 Rally VSE1T
Vespa P 200 E VSX1T
Vespa PX 200 E VSX1T
Vespa PX 200 E Arcobaleno VSX1T
Vespa PX 200 E Arcobaleno Elestart VSX1T
Vespa 200 PE VSX1T Millennium '98
Vespa 200 Cosa VSR1T
Diameter: 107 mm
DRT Z22 clutch gear on Polini Z64 primary for Vespa 80-125-150-200 PX PE-GT-GTR-SPRINT-V-TS-GL-RALLY
Vespa 80-125-150-200 PX PE-GT-GTR-SPRINT-V-TS-GL-RALLY
For clutch 6 springs d. 97 mm
Vespa 50/90/125/150/180/200 GT-GTR-TS-VNB-PX-VBB-VBA-Sprint-Super-GL-GS-Rally
The conical pin "Spillone" helps to achieve perfect carburetion thanks to its "particular" conicity.
DRT clutch gear 23 teeth for Polini 64 straight teeth elastic gear Vespa "COSA 2" for Vespa PX125-200 E Lusso '95->/'98/MY/'11/Cosa 2
Vespa "COSA 2" for Vespa PX125-200 E Lusso '95->/'98/MY/'11/Cosa 2
DRT reinforced clutch kit with 8 springs for Vespa 125/150/200 Sprint-S.Veloce-GT-GTR-TS-PX-PE
Vespa 125 VNB/GT/GTR/TS/PX
Vespa 150 VBB/GL/Sprint/Sprint Veloce/PX
Vespa 200 PE
Ø 115 mm
with discs
28 spring(s)
2 washers
thickness 1.15mm
Vespa 160 GS VSB1T
Vespa 180 SS VSC1T
Length 136 mm, bearing seat diameter 12 mm, bushing seat 9 mm.
DRT reinforced gear selector rod and cross for Vespa 125/150/180/200 GT-GTR-Sprint-GL-PX 1°-Rally
Vespa 125 GT VNL2T
Vespa 125 Super VNC1T
Vespa 125 GTR VNL2T
Vespa 150 Sprint VLB1T
Vespa 150 Super VBC1T
Vespa 150 Sprint Veloce VLB1T
Vespa 180 Rally VSD1T
Vespa 200 Rally VSE1T
Vespa PX
Vespa PE
Warning: The washer under the crosshead must be removed
Cross DRT type with thread for Vespa PX PE 80 cc (V8X1T>100230)/125 cc (VNX2T>232052)/150 cc (VLX1T>624301)/200 cc (VSX1T>315266)/Rally180 (VSD1T 26849>/Rally200
Vespa 125 GT VNL1>2T 78301>
Vespa 125 GTR VNL2T 124014>
Vespa 125 TS VNL3T
Vespa 125 PX VNX1T>2T > 232052
Vespa 150 Super VBC1T 181687>
Vespa 150 Sprint VLB1T 1.170240>
Vespa 150 Sprint Veloce VLB1T 0169301>
Vespa 150 PX VLX1T > 624301
Vespa 180 Rally VSD1T 0026849>
Vespa 200 Rally VSE1T 004476>
Vespa 200 PE VSX1T > 315266
Vespa 50 V5A1T N,L,R
Vespa 50 PK
Vespa 90 V9A1T
Vespa 125 Primavera VMA1>2T
Vespa 125 Primavera ET3 VMB1T
Vespa 125 PK
It fits perfectly by replacing the original 24-tooth sprocket.
DRT Z22 clutch gear on primary Z65 for Vespa 80-125-150-200 PX PE-GT-GTR-SPRINT-V-TS-GL-RALLY
Vespa 80-125-150-200 PX PE-GT-GTR-SPRINT-V-TS-GL-RALLY
Tested on primary Z65, it fits perfectly with 7-spring clutches (Diam.107.769mm)
Vespa 50 V5A1T N,L,R
Vespa 50 PK
Vespa 90 V9A1T
Vespa 125 Primavera VMA1>2T
Vespa 125 Primavera ET3 VMB1T
Vespa 125 PK
KIT Prisoners DRT cylinder fixing M8x160mm (4pcs) for Vespa 200 PE-Rally-Cosa
Vespa 200 PE-Rally-Thing
Size: M 8 by 160 mm
Vespa 50 Special V5A2>3T
Vespa 50 Special V5B1>4T
Beam of light enhanced thanks to the bilight lamp 6V-15/15, complete with a bracket for mounting.
DRT clutch basket gear (Z24-65) for Vespa 125/150/200 PX-PE-Rainbow-Disc brake-Cosa
Vespa 200 PE VSX1T Millennium '98
Vespa 200 Cosa VSR1T
It fits perfectly replacing the original 23-tooth gear
Clutch gear group Z22 on primary Z62 DRT/SIP for Vespa 80-125-150-200 PX PE
Vespa 80/100/125/150/200
Tested on primary Z62, it fits perfectly with 7-spring clutches (Diam.107.769mm)