Spare parts and accessories for Vespa 125 VNB5T
Find specific spare parts for Vespa 125 VNB5T (1963-1964), the breakthrough model that introduces the 4-speed gearbox to the VNB series for the first time. Unlike the previous VNB4T, this version requires dedicated mechanical components, especially for the gearbox assembly, cruciform, and gear selector. Our catalog offers everything needed for a faithful restoration: from engine parts to specific Amethyst Gray paint, to original emblems and lighting. Rely on our selection to find perfectly compatible parts for your 4-speed VNB.
Intake bellows -MRP Dumbo Ø60mm (Keihin PWK 33-38mm, Mikuni TMX 35, Polini 32/34, Dellorto PHBH 28/30, VHSH 30)- Vespa PX, T5, Sprint, Rally, GT, GTR, GL150, Super, VNA, VNB, VBA, VBB
Vespa 125 VNB/GT/GTR/TS/PX
Vespa 150 VBB/GL/Sprint/Sprint Veloce/PX
Vespa 200 PE
Intelligent MRP solution to continue drawing cold air from the frame when using larger carburetors.
The opening in the frame has a size of approximately 60x44mm. The area is therefore equivalent to a carburetor with a cross-section greater than Ø50mm. Thus, the intake tube solution does not offer any performance loss even on very powerful engines. Thanks to the cooler intake air, better results can be expected under heavy load, which otherwise strongly heats the intake air under the side cover.
Another great advantage is that the frame can also be used as sound insulation. Engines that have been converted to diaphragm-controlled intake can drastically reduce the intake air noise level. For this purpose, the frame can be further lined from the inside with sound-absorbing material.
Pinasco SI 26/26 Carburetor for Vespa 125 VNB/GT/GTR/TS/PX-150 VBB/GL/SPRINT/V/PX-200 RALLY-PE
Vespa 125 GT VNL2T
Vespa 125 GTR VNL2T
Vespa 125 TS VNL3T
Vespa 125 PX
Vespa 150 Sprint VLB1T
Vespa 150 Sprint Veloce VLB1T
Vespa 150 PX
Vespa 200 PE
Pinasco SI 26/26 MIX Carburetor for Vespa 125 VNB/GT/GTR/TS/PX-150 VBB/GL/SPRINT/V/PX-200 RALLY-PE
Vespa 125 GT VNL2T
Vespa 125 GTR VNL2T
Vespa 125 TS VNL3T
Vespa 125 PX
Vespa 150 Sprint VLB1T
Vespa 150 Sprint Veloce VLB1T
Vespa 150 PX
Vespa 200 PE
Cable grommet for hood lever in gray color for Vespa 125/150/VNB/VBB/GL/Sprint/Rally/PX 1°
Vespa 125/150/160/180/200 all from 1958
In grey rubber
Fixing screw kit for Vespa 125 V30>33T/VM/VN/VL/VB1T/VBA/VNB/GT/GTR/Sprint/Super
Vespa 125/150
Finish: Galvanized
Kit composed of 6 screws M 4 x L. 30 mm, washers and nuts
Tool bag with tools Vespa 125/150/180/200 VNB, VBB, Rally, Sprint, PX, PK, Lambretta, GTS, Sprint, Primavera, LX, S, ET4 universal - black
Vespa 125/150/180/200 VNB, VBB, Rally, Sprint, PX, PK, Lambretta, GTS, Sprint, Primavera, LX, S, ET4 universal
Included:
- 6 ring spanners in sizes (7, 8, 9, 10, 11, and 13mm).
- A set of 10-piece ½" socket wrenches in sizes (10, 11, 13, 14, 17, 19, 21, 22, and 24mm)
- A set of 41-piece ¼" socket wrenches in sizes from 4mm to 14mm and bits for slotted, Phillips, hex, and TX wrenches
- Needle nose pliers
- Tube wrench
- Spark plug wrench
- 10 cable ties
- 10m insulating tape
- 100g of winding wire
- 11-piece Bowden cable repair kit
- Canvas tool bag with 5 compartments
Tool bag for Vespa 125/150/180/200 VNB, VBB, Rally, Sprint, PX, PK, Lambretta, GTS, Sprint, Primavera, LX, S, ET4 universal - brown
Vespa 125/150/180/200 VNB, VBB, Rally, Sprint, PX, PK, Lambretta, GTS, Sprint, Primavera, LX, S, ET4 universal
Vespa 125 VNA1>2T
Vespa 125 VNB1>6T
Vespa 125 Super VNC1T
Vespa 125 GT VNL2T
Vespa 125 GTR VNL2T
Vespa 125 TS VNL3T
Vespa 125 PX
Vespa 150 GL VLA1T
Vespa 150 Super VBC1T
Vespa 150 VBA1T
Vespa 150 VBB1>2T
Vespa 150 Sprint VLB1T
Vespa 150 Sprint Veloce VLB1T
Vespa 150 PX
Vespa 160 GS VSB1T
Vespa 180 SS VSCT
Vespa 180 Rally VSD1T
Vespa 200 Rally VSE1T
Vespa 200 PX
Chromed
Spring, washer, and nut
Aluminum air filter box for Vespa 125 VNB-TS/150 VBA-Super/180 Rally/PX80/125/150E
Vespa 125 GT VNL2T
Vespa 125 GTR VNL2T
Vespa 125 TS VNL3T
Vespa 150 Sprint Veloce VLB1T
Vespa 150 Sprint VLB1T
Vespa 125 PX
Vespa 150 PX
Black metal air filter cover for Vespa 125 VNB/VBB/GL/Sprint/S.Veloce/PX/TS
Vespa 125 GT VNL2T
Vespa 125 GTR VNL2T
Vespa 125 TS VNL3T
Vespa 125 PX
Vespa 150 Sprint VLB1T
Vespa 150 Sprint Veloce VLB1T
Vespa 150 PX
In Black Colored Metal
Specific for carburetor
1.6 mm
4 mm
Cable Grommet Fuel Tube Body for Vespa 80/125/150/160/180/200 Sprint, VNB-VBB-VBA-GT-GTR-PX-Cosa
Vespa 125 from 1958, Vespa 150 from 1958, Vespa 160 GS VSB1T, Vespa 180, Vespa 200, PX / PE
T5
In rubber, black color
Fuel hose grommet for Vespa 80/125/150/160/180/200 T5-Sprint, VNB-VBB-VBA-GT-GTR-PX-Rally
Vespa 125 from '58 (all)
Vespa 150 from '58 (all)
In rubber, black color
Seal/cap for air cleaner (carburetor screw) for Vespa 125 VNB-TS/150 VBA-Super/Rally/PX80-200/PE/Lusso/T5
Vespa 125 (excluding Primavera ET3)
Vespa 150
Vespa 160
Vespa 180
Vespa 200
Carburetor-air filter gasket pair, engine cover-air filter for Vespa 125 VNB-TS/150 VBA-Super/Rally/PX80-200/PE
Vespa 125/150
Paper
2 Pcs.
Carburetor-Air Filter Gasket ATHENA for Vespa 125 VNB-TS/150 VBA-Super/Rally/PX80-200/PE
Vespa 125/150
Athena offers the widest range of loose replacement gaskets
available on the market. At the core of Athena gaskets are
over forty years of industry experience, solid know-how, and
high technical skills in design and production.
Athena boasts constant technological development conducted by an in-house
team of engineers and designers and a Made in Italy production
carried out strictly following the stringent parameters set by manufacturers.
Purifier gasket for Vespa 125/150 PX PE VBA VBB VNB GT GTR TS GL RALLY
Vespa PX
Vespa PE
Vespa 125
Vespa 150
Vespa 160
Vespa 180
Vespa 200
Athena gasket between crankcase and air filter for Vespa 125/150/180/200 PX-PE-T5 with Mix
Vespa 125/150/180/200
Athena provides the widest range of replacement bulk gaskets available on the market. At the core of Athena gaskets are over forty years of industry experience, solid know-how, and high technical skills in the design and production phases. Athena boasts constant technological development conducted by an internal team of engineers and designers and a Made in Italy production carried out strictly following the strict parameters imposed by manufacturers.
Athena gasket between crankcase and air filter for Vespa 125 VNB-TS/150 VBA-Super/Rally/PX80-200/PE
Vespa 125/150/180/200
Athena provides the widest range of loose replacement gaskets available on the market. At the core of Athena gaskets are over forty years of industry experience, solid know-how, and high technical skills in the design and production phase. Athena boasts constant technological development conducted by an internal team of engineers and designers and a Made in Italy production carried out strictly following the stringent parameters imposed by the manufacturers.
For models without MIX
Athena gasket between carburetor and air filter for Vespa 125 VNB-TS/150 VBA-Super/Rally/PX80-200/PE
Vespa 125/150/180/200
Athena provides the widest range of bulk replacement gaskets available on the market. Athena gaskets are based on over forty years of industry experience, solid know-how, and high technical skills in the design and production phases. Athena boasts constant technological development carried out by an internal team of engineers and designers and a Made in Italy production executed by strictly adhering to the stringent parameters imposed by the manufacturers.
For models without MIX
Siltech Performance Purifier Gasket for Vespa 125/150 PX PE VBA VBB VNB GT GTR TS GL RALLY
Vespa PX
Vespa PE
Vespa 125
Vespa 150
Vespa 160
Vespa 180
Vespa 200
Gasket for the carburetor box (WITHOUT MIXER) made of
sintered polymer, it is flexible but with excellent mechanical and chemical resistance.
It has the same shape as the box to avoid making joints and ensure optimal sealing.
Vespa 125/150/180/200
Seal for faucet rod in grey color for Vespa 50-125 PV/ET3/PK/S/XL/VNA-TS/150 VBA-T4/160 GS/180 SS/Rally/P80-150X/PX80-200E/Lusso 1°/P150S/P200E
Vespa 50/90/125/150/160/180/200
Gray color
Base gasket for fuel tap for Vespa V50/PV/ET3/125/GT/GTR/Super/TS/150 Sprint/V/Super/180/200 Rally/GS160/SS180/PK50-125/PX80-200/T5
All models except VM1>2T, V30>33T, VB1T
Thickness--> 3mm
Red fuel tap rod gasket for Vespa 50-125 PV/ET3/PK/S/XL/VNA-TS/150 VBA-T4/160 GS/180 SS/Rally/P80-150X/PX80-200E/Lusso 1°/P150S/P200E
Vespa 50
Vespa 90
Vespa 125
Vespa 125 PX VNX2T> 53219
Vespa 150
Vespa 150 PX VLX1T> 430974
Vespa 180
Vespa 200
Vespa 200 PE VSX1T> 138246
Color black
Viton fuel tap selector gasket for Vespa 50/90/125/150/200 N-L-R Primavera-PX-VBB-Sprint-GL
Vespa 50 all models
Vespa 90 all models
Vespa 125 from 1951 all models
Vespa 150 all except 150 GS VS1T 009451>
Vespa 160 all models
Vespa 180 all models
Vespa 200 all models
Note: Resistant to green gasoline
Vespa 50 all models
Vespa 90 all models
Vespa 125 from 1951 all models
Vespa 150 all except 150 GS VS1T 009451>
Vespa 160 all models
Vespa 180 all models
Vespa 200 all models
Note: Resistant to green gasoline
Gasket for glass and reflector union in cream-colored rubber
Vespa 125 VNB3>6T
Vespa 150 VB1T
Vespa 150 GS VS1>5T
Vespa 150 VBA1T
Vespa 150 VBB1>2T
Vespa 160 GS VSB1T
Ape 125 A1>15T
Ape 150 AB1>4T
Ape 150 AC1>4T
Ape 175
Suitable for optical groups with Diameter 115 mm
Vintage metal clamp for securing transmissions and various uses
All Models/All Models
Gray transmission cable tube 50cm for Vespa 125/150 V30>33T/VM1>2T/VN/VL/VB1T/VNA/VNB/VBA/VBB/GL/Sprint/GT/GTR
All models
Measurements: Length: 500mm
Outer Diameter: 10mm
Cable mounting bracket for Vespa PX/T5/Cosa/VNA-VNB-VBB-Sprint-GT-GTR-TS-GL
VESPA 125 VNA1>2T
VESPA 125 VNB1>6T
Vespa 125 PX VNX1>2T
Vespa 125 GT -GTR-TS
Vespa 150 VBA1T
Vespa 150 VBB1>2T
Vespa 150 GL VLA1T
Vespa 150 GS VS2>5T
Vespa 150 Sprint VLB1T
Vespa 150 Sprint V.
Vespa 160 GS VSB1T
Vespa 180 SS VSC1T
Vespa 180 Rally VSD1T
Zinc-coated
Vespa 125 VNB1>6T
Vespa 125 GT VNL2T
Vespa 125 GTR VNL2T
Vespa 125 Super VNC1T
Vespa 125 TS VNL3T
Vespa 150 Sprint VLB1T
Vespa 150 Sprint Veloce VLB1T
Vespa 150 VBA1T
Vespa 150 VBB1>2T
Vespa 150 GL VLA1T
Vespa 150 Super VBC1T
Vespa 180 Rally VSD1T
Vespa 200 Rally VSE1T
Vespa 80/125/150/200 PX
In Burnished Steel
Specifically designed for wire clutch
Specifically designed for wire exchange / Specifico per filo cambio
Specifically designed for wire exchange / Specifico per filo cambio
Leverage for rear brake shoe cam for Vespa 200 Rally/P200E/PX200 E/Lusso/'98/MY
Vespa 125 VNB1>6T (to improve braking)
Vespa 125 GT VNL2T (to improve braking)
Vespa 125 GTR VNL2T (to improve braking)
Vespa 125 Super VNC1T (to improve braking)
Vespa 125 TS VNL3T (to improve braking)
Vespa 150 Sprint VLB1T (to improve braking)
Vespa 150 Sprint Veloce VLB1T (to improve braking)
Vespa 150 VBA1T (to improve braking)
Vespa 150 VBB1>2T (to improve braking)
Vespa 150 GL VLA1T (to improve braking)
Vespa 150 Super VBC1T (to improve braking)
Vespa 180 Rally VSD1T (to improve braking)
Vespa 200 Rally VSE1T
V
l=83 mm
a=3.0/5.8 mm
steel, galvanized
Complete cable clamp kit for Vespa V50/PV/ET3/PK/S/XL/XL2/FL/PX- Rally
All models / Tutti i modelli
Safety cotter pin for cable clamp and various (10 pcs) Vespa 50/90/125/150/160/180/200
All Models
Galvanized, 1.7x37mm
Vespa 50 V5A1T
Vespa 90 V9A1T
Vespa 125 Primavera VMA1>2T
Vespa 125 Primavera ET3 VMB1T
Vespa 125 VNA1>2T
Vespa 125 VNB1>6T
Vespa 125 GT VNL1>2T
Vespa 125 Super VNC1T
Vespa 125 GTR VNL2T
Vespa 125 TS VNL3T
Vespa 125 PX VNX1>2T
Vespa 150 VBA1T
Vespa 150 VBB1>2T
Vespa 150 Super VBC1T
Vespa 150 Sprint VLB1T
Vespa 150 Sprint Veloce VLB1T
Vespa 150 PX VLX1T
Vespa 160 GS VSB1T
Vespa 180 SS VSC1T
Vespa 180 Rally V
KIT rings OR engine for Vespa 125 VNA/VNB/GT/GTR/TS/Super/PX-150 PX/Sprint/GL/160 GS/180SS/200 Rally/PE
Vespa 125 1958>
Vespa 150 1959>
Vespa 160
Vespa 180
Vespa 200
KIT composed of 5 PCS