Classic Vespa
Short clutch lever to long clutch lever conversion kit BOLLA ELABORAZIONI for Vespa 50/125 N-L-R-Special-Primavera
Vespa 50/125 with short clutch lever
Reinforced starter gear spring and washer BOLLA ELABORAZIONI for Vespa 50 N/L/R-Special-125/Primavera/ET3/PK50-125/S/XL/XL2
Vespa 50 V5A1T N/L/R
Vespa 50 Special V5A2>3T
Vespa 50 Special V5B1>4T
Vespa 90 V9A1T
Vespa 125 Primavera ET3 VMB1T
Vespa 125 Primavera VMA1T>2T
Starter buffer BOLLA ELABORAZIONI for Vespa 50 R 2°/S 2°/Special V5B3T 2°/SR 2°/90 2°/100/125 PV 2°/ET3 2°/PK50/S/SS/XL/2/FL/HP/Rush/PK80-125 S/PK125/ETS/N/XL/XL2
Vespa 50 V5A1T 893030>
Vespa 50 Special V5B3T 88658>
Vespa 90 V9A1T 141513>
Vespa 125 Primavera VMA2T 0148637>
Vespa 125 Primavera ET3 VMB1T 8091>
Vespa PK
Special starter sector rubber pad for Vespa 50, 90, 125 ET3 Primavera, PK
made of rubber resistant to both Synthetic and Mineral oils.
Dimensions 23×21.7x7mm optimized to correctly accommodate the starter blade.
It is guaranteed not to dry out or crack even under the most severe stresses.
The rubber pads are designed to be compatible also with the new
modern casings available on the market for small frame Vespa.
Pair of side frame reinforcements BOLLA ELABORAZIONI with skull for Vespa 125/150/160/180/200 VNA-VNB-VBB-GT-GTR-PX-TS-Rally-SS
Vespa 125 VNA1>2T
Vespa 125 VNB1>6T
Vespa 125 Super VNC1T
Vespa 125 GT VNL2T
Vespa 125 GTR VNL2T
Vespa 125 TS VNL3T
Vespa 125 PX
Vespa 150 VBA1T
Vespa 150 VBB1>2T
Vespa 150 GL VLA1T
Vespa 150 Super VBC1T
Vespa 150 Sprint VLB1T
Vespa 150 Sprint Veloce VLB1T
Vespa 150 PX
Vespa 160 GS VSB1T
Vespa 180 SS VSCT
Vespa 180 Rally VSD1T
Vespa 200 Rally VSE1T
Vespa 200 PE
Kit composed of 2 brackets + pivot screw for engine mount
To increase the rigidity of the frame
Made of steel
Pair of lateral frame reinforcements BOLLA ELABORAZIONI for Vespa 125/150/160/180/200 VNA-VNB-VBB-GT-GTR-PX-TS-Rally-SS
Vespa 125 VNA1>2T
Vespa 125 VNB1>6T
Vespa 125 Super VNC1T
Vespa 125 GT VNL2T
Vespa 125 GTR VNL2T
Vespa 125 TS VNL3T
Vespa 125 PX
Vespa 150 VBA1T
Vespa 150 VBB1>2T
Vespa 150 GL VLA1T
Vespa 150 Super VBC1T
Vespa 150 Sprint VLB1T
Vespa 150 Sprint Veloce VLB1T
Vespa 150 PX
Vespa 160 GS VSB1T
Vespa 180 SS VSCT
Vespa 180 Rally VSD1T
Vespa 200 Rally VSE1T
Vespa 200 PE
Kit composed of 2 brackets + engine mount bolt
To increase the rigidity of the frame
Made of steel
Pair of side frame reinforcements BOLLA ELABORAZIONI for Vespa 50/90/125 Special-N-L-R-Primavera-ET3
Vespa 50/90/125 Special-N-L-R-Primavera-ET3
Plates to weld to the frame
This plate will make your frame stiffer.
To have a direct change of direction when entering a curve.
Pair of black side frame reinforcements BOLLA ELABORAZIONI for Vespa 50/90/125 Special-N-L-R-Primavera-ET3
Vespa 50/90/125 Special-N-L-R-Primavera-ET3
Plates to be welded to the frame
This plate will make your frame stiffer.
To have a direct change of direction when entering a curve.
Cable guide racing BOLLA ELABORAZIONI with clutch cable adjuster for Vespa 50/90/125 Special-N-L-R/Primavera-ET3-PK
Vespa 50 V5A1T N/L/R
Vespa 50 Special
Vespa 50 PK
Vespa 90 V9A1T
Vespa 125 Primavera VMA1>2T
Vespa 125 Primavera ET3 VMB1T
Vespa 125 ETS
stainless steel platform kit Vespa "CROSS" BOLLA ELABORAZIONI for Vespa 50-125/PV/ET3
Vespa 50 V5A1T N,L,R
Vespa 50 Special V5A2>3T
Vespa 50 Special V5B1>4T
Vespa 90 V9A1T
Vespa 125 Primavera VMA1T>2T
Vespa 125 Primavera ET3 VMB1T
Included with screws for assembly
stainless steel footboard kit Vespa "classic" mod. A BOLLA ELABORAZIONI for Vespa 50-125/PV/ET3
Vespa 50 V5A1T N,L,R
Vespa 50 Special V5A2>3T
Vespa 50 Special V5B1>4T
Vespa 90 V9A1T
Vespa 125 Primavera VMA1T>2T
Vespa 125 Primavera ET3 VMB1T
Includes screws for assembly
stainless steel footboard kit Vespa "classic" mod.B BOLLA ELABORAZIONI for Vespa 50-125/PV/ET3
Vespa 50 V5A1T N,L,R
Vespa 50 Special V5A2>3T
Vespa 50 Special V5B1>4T
Vespa 90 V9A1T
Vespa 125 Primavera VMA1T>2T
Vespa 125 Primavera ET3 VMB1T
Included with screws for assembly
stainless steel footboard kit for Vespa "classic" with BOLLA ELABORAZIONI spacers for Vespa 50-125/PV/ET3
Vespa 50 V5A1T N,L,R
Vespa 50 Special V5A2>3T
Vespa 50 Special V5B1>4T
Vespa 90 V9A1T
Vespa 125 Primavera VMA1T>2T
Vespa 125 Primavera ET3 VMB1T
Including screws for assembly
Included spacers for raised effect
stainless steel footboard kit Vespa "classic" black color BOLLA ELABORAZIONI for Vespa 50-125/PV/ET3
Vespa 50 V5A1T N,L,R
Vespa 50 Special V5A2>3T
Vespa 50 Special V5B1>4T
Vespa 90 V9A1T
Vespa 125 Primavera VMA1T>2T
Vespa 125 Primavera ET3 VMB1T
Including screws for assembly
stainless steel footboard kit Vespa "classic" BOLLA ELABORAZIONI for Vespa 125/150/200 PX-PE
Vespa 80/125/150/200 PX
Includes screws for assembly
stainless steel floorboard kit Vespa "classic" BOLLA ELABORAZIONI for Vespa 125/150/200 PX-PE
Vespa 80/125/150/200 PX
Includes screws for assembly
stainless steel footboard kit Vespa "classic" original holes BOLLA ELABORAZIONI for Vespa 50-125/PV/ET3
Vespa 50 V5A1T N,L,R
Vespa 50 Special V5A2>3T
Vespa 50 Special V5B1>4T
Vespa 90 V9A1T
Vespa 125 Primavera VMA1T>2T
Vespa 125 Primavera ET3 VMB1T
Includes screws for assembly
stainless steel platform kit Vespa "classic" original holes in black BOLLA ELABORAZIONI for Vespa 50-125/PV/ET3
Vespa 50 V5A1T N,L,R
Vespa 50 Special V5A2>3T
Vespa 50 Special V5B1>4T
Vespa 90 V9A1T
Vespa 125 Primavera VMA1T>2T
Vespa 125 Primavera ET3 VMB1T
Includes screws for assembly
Zinc-coated engine mounting bolt with increased length BOLLA ELABORAZIONI for Vespa 50/90/125/Primavera/ET3/PK50-125/S/XL/N/HP
Vespa 50 V5A1T N,L,R
Vespa 50 Special V5A2>3T
Vespa 50 Special V5B1>4T
Vespa 90 V9A1T
Vespa 125 Primavera VMA1T>2T
Vespa 125 Primavera ET3 VMB1T
Vespa PK 50 S,XL,Rush,N, FL
Longer compared to the original, for mounting reinforcement brackets
Classic side reinforcement bracket engine side BOLLA ELABORAZIONI for Vespa 50/90/125 Special-Primavera-ET3
Vespa 50 V5A1T 92877>
Vespa 50 Special V5A2>3T
Vespa 50 Special V5B1>4T
Vespa 90 V9A1T 22235>
Vespa 125 Primavera VMA1T>2T
Vespa 125 Primavera ET3 VMB1T
Classic model --> follows the frame
Installation without modifications, externally with spacers, internally without
Material: Stainless steel
Side reinforcement bracket muscle engine side BOLLA ELABORAZIONI for Vespa 50/90/125 Special-Primavera-ET3
Vespa 50 V5A1T 92877>
Vespa 50 Special V5A2>3T
Vespa 50 Special V5B1>4T
Vespa 90 V9A1T 22235>
Vespa 125 Primavera VMA1T>2T
Vespa 125 Primavera ET3 VMB1T
Muscle model--> For the most demanding
Installation without modifications, externally with spacers, internally without
Material: Stainless Steel
Classic black side reinforcement bracket engine side BOLLA ELABORAZIONI for Vespa 50/90/125 Special-Primavera-ET3
Vespa 50 V5A1T 92877>
Vespa 50 Special V5A2>3T
Vespa 50 Special V5B1>4T
Vespa 90 V9A1T 22235>
Vespa 125 Primavera VMA1T>2T
Vespa 125 Primavera ET3 VMB1T
Classic model --> follows the frame
Installation without modifications, externally with spacers, internally without
Material: Stainless steel
Side reinforcement bracket classic black engine side BOLLA ELABORAZIONI for Vespa 50/125 PK S-XL
Vespa PK 50
Vespa PK 50 XL
Vespa PK 125
Vespa PK 125 XL
Vespa PK Rush
Classic model --> follows the frame
Installation without modifications, externally with spacers, internally without
Material: Stainless Steel
Coil support bracket and voltage regulator BOLLA ELABORAZIONI for Vespa 50/90/125 Special/N-L-R-Primavera-PK
Vespa 50/90/125 Special/N-L-R-Primavera-PK
Plate Support for control unit and voltage regulator to be fixed on Vespa small frame engine casing
With this support made of stainless steel, it is possible to
mount the coil and the voltage regulator directly on the Vespa small frame
engine casing
Black brackets for fixing canister/bag on BOLLA ELABORAZIONI platform for Vespa 125/150/160/180/200
All models
Stainless steel brackets for fixing canister/bag on BOLLA ELABORAZIONI platform for Vespa 125/150/160/180/200
All models
Stainless steel speedometer compartment cover BOLLA ELABORAZIONI for Vespa V50 Special/Elestart
Vespa 50 Special V5A2T > V5A3T
Vespa 50 Special V5B1T > V5B3T
Mounting bracket included
Stainless steel speedometer compartment cover BOLLA ELABORAZIONI for Vespa 50 V5A1T N/L/R
Vespa 50 N V5A1T from 1968
Vespa 50 R V5A1T from 1968
Vespa 50 L V5A1T from 1968
Including mounting bracket
Stainless steel speedometer compartment cover BOLLA ELABORAZIONI for Vespa 125 GTR-ET3/150 Sprint Veloce
Vespa 125 Primavera ET3 VMB1T
Vespa 125 GTR VNL2T
Vespa 150 Sprint Veloce VLB1T
Stainless steel speedometer cover BOLLA ELABORAZIONI for Vespa 50/125 PK S
Vespa 50 PK
Vespa 50 PK S
Vespa 125 PK
Vespa 125 PK S
In plastic, color black
Front disc brake kit Dexter Racing Classic Black edition for Vespa 50/90/125 Primavera ET3/PK
Vespa 50/90/125 Primavera ET3
Vespa 50 PK S/XL
Dexter Racing Disc Brake Conversion Kit for Original Vespa Smallframe Fork (V50/90/125 Primavera ET3/PK)
The Dexter Racing kit represents the ultimate evolution for those who wish to install a disc brake on a Vespa Smallframe while maintaining the original fork. The great innovation of this system lies in the replacement of only the swinging hub: this allows for modern and adjustable braking power without having to modify the frame, cut the mudguard, or replace the entire fork. The result is a clean, integrated aesthetic upgrade that is completely reversible if necessary.
Technical and Construction Features
The swinging arm and wheel hub are made of solid aluminum through CNC machining, ensuring maximum rigidity and precision.
The hub is designed to maintain an almost original look.
Caliper Mount: Radial mount with 82 mm spacing.
Wheel Compatibility: Designed for 10-inch wheels (also compatible with tubeless configurations depending on the wheel).
Anti-Dive TechnologyOne of the historical flaws of the Smallframe fork is excessive dive during braking. Dexter has solved this problem by redesigning the shock absorber
Prigioniero Racing CRIMAZ M7x155 mm with hexagonal recess for Vespa 50/125 N-L-R/Special/PK-Primavera-ET3
Vespa 125 Primavera VMA1T>2T
Vespa 125 Primavera ET3 VMB1T
Vespa 125 PK S/XL/N/HP
Headlight glass with continuous vertical lines SIEM for Vespa 125 VM/VN/VNA/VNB1-2/150 VL
Vespa 125 VM1>2T
Vespa 125 VN1>2T
Vespa 125 VNA1>2T
Vespa 125 VNB1>2T
Vespa 150 VL1>3T
Diameter: 105 mm
Sip Touren 2.0 Ignition Kit cone 20 (flywheel 2.3kg) for Vespa 50/125 PK S/XL/HP
Vespa 50/125 PK S/XL/HP
Without battery, incl. stator, voltage regulator, control unit, fan
Complete thermal group Quattrini M1-B diameter 60 GTR (144 cc) for Vespa 50 Special-N-L-R/90/125 Primavera ET3-PK-ETS
Vespa 125 Primavera VMA1>2T
Vespa 125 Primavera ET3 VMB1T
Vespa 125 ETS
Vespa 125 PK
Displacement: 144 cc - New version with exhaust booster
New version of the thermal group for Vespa ET3, Primavera, Special, PK,
crankcase intake. It has a larger exhaust (muffler mounting hole spacing
of 56mm), an interior with new transfer ports,
resized shell and an enlarged base. It consists of an
aluminum cylinder (Nikasil, 60mm bore, 51mm stroke, 150cc,
exhaust booster, 5 transfer ports), interlocking aluminum head,
lightened piston (single ring), gaskets, assembly instructions.
It mounts without boring the crankcase.
Cable grommet for black hood lever for Vespa 125/150/200 PX-PE-Rally-TS
Vespa 125 PX
Vespa 150 PX
Vespa 200 PE
In black rubber
Hood joint protection tube for Vespa 125 VNA/VNB/super/GT/GTR/TS-150 VBA/VBB/GL/Sprint/Sprint V/PX-PE
Vespa 125/150/160/180/200 All 1958>
In rubber, black color
Ref. Orig
. 024041
Rubber body and tank gasket for Vespa 125 GT-TS/150 GL-Super/160 GS/180 SS/Rally/PX80/125/150/200
Vespa 125 VNA1T > VNA2T
Vespa 125 VNB1T > VNB6T
Vespa 125 Super VNC1T
Vespa 125 GT VNL1>2T
Vespa 125 TS VNL3T
Vespa 125 GTR VNL2T
Vespa 150 VBB1T > VBB2T
Vespa 150 VBA1T
Vespa 150 Super VBC1T
Vespa 150 Sprint VLB1T
Vespa 150 Sprint Veloce VLB1T
Vespa 160 GS VSB1T
Vespa 180 SS VSC1T
Vespa 180 Rally VSD1T
Vespa 200 Rally VSE1T
Vespa PX (all)
Vespa PE
Thickness: 3 mm
Clutch, gear, rear brake cable for Vespa 125 VNB/GT/GTR/TS/T5/PX-150 VBB/GL/Super/Sprint/PX-160 GS/180SS/200PE
Vespa 125 VNB4T 0110644>
Vespa 125 VNB5>6T
Vespa 125 Super VNC1T
Vespa 125 GT VNL1>2T
Vespa 125 GTR VNL2T
Vespa 125 TS VNL3T
Vespa 150 VBB2T
Vespa 150 GL VLA1T
Vespa 150 Super VBC1T
Vespa 150 Sprint VLB1T
Vespa 150 Sprint Veloce VLB1T
Vespa 160 GS VSB1T
Vespa 180 Rally VSD1T
Vespa 180 SS VSC1T
Vespa 200 Rally VSE1T
Vespa PX/PE
Vespa 125 TS VNL3T
Vespa 125 T5 VNX5T
Vespa 180 Rally VSD1T
Vespa 200 Rally VSE1T
Vespa PX
Vespa PE
Cable grommet for electrical system, starter and accelerator for Vespa 125 VNA-TS/150 VBA-T4/160 GS/180 SS/Rally/PX80-200/PE/Lusso/'98/MY/'11
Vespa 80 PX V8X1T
Vespa 125 VNA1>2T
Vespa 125 VNB1T > VNB6T
Vespa 125 Super VNC1T
Vespa 125 GT VNL1>2T
Vespa 125 GTR VNL2T
Vespa 125 TS VNL3T
Vespa 150 VBA1T
Vespa 150 VBB1>2T
Vespa 150 GL VLA1T
Vespa 150 Sprint VLB1T
Vespa 150 Sprint Veloce VLB1T
Vespa 150 Super VBC1T
Vespa 160 GS VSB1T
Vespa 180 SS VSC1T
Vespa 180 Rally VSD1T
Vespa 200 Rally VSE1T
Vespa PX/PE