Classic Vespa
Vespa 50/90/125
a=6.2 mm
Ø i 8mm
Gray in color
Vespa 50 PK S
LED conversion kit for Vespa PK 50 S, consisting of:
12v DC voltage regulator;
LED position lights;
LED high beam bulb;
LED stop bulb;
flasher and bulbs for indicators (if selected).
The product is perfectly compatible with both the original ignition and IDM and does not require structural modifications to the headlights.
The installation is carried out using the original wiring, and requires fully reversible modifications, fully described in the instruction manual supplied with the kit.
Battery-less model
Vespa 125 PK (Front lights, rear lights, indicators)
LED conversion kit for Vespa PK 125 including everything needed for the conversion to direct current of your electrical system, even with original 6 V ignition.
Includes:-Specific 12 V DC voltage regulator;-Plug and play front bulb holder with paired dual-beam bulb and position light;-Rear position light bulb;-Brake indicator light bulb;-12 V DC flasher relay and bulbs for turn signals (if the vehicle is equipped with them).
The installation does not require modifications to headlights or bodywork, nor does it require the replacement of existing cables; the only intervention (totally reversible) must be carried out on the standard light switch/turn signal switch following the instructions provided. A small-sized battery must be added, charged with the engine running through the supplied voltage regulator. The front bulb holder is designed to achieve the best possible alignment between the bulb and reflector: this maximizes the performance of the system, as the light beam is directed exclusively to the ground with maximum uniformity.
The product, therefore, allows the conversion to direct current of the electrical system (with the possibility of powering USB chargers and similar), significantly increases nighttime visibility, and ensures maximum safety while traveling.
Evening outings in the
Seal for faucet rod in grey color for Vespa 50-125 PV/ET3/PK/S/XL/VNA-TS/150 VBA-T4/160 GS/180 SS/Rally/P80-150X/PX80-200E/Lusso 1°/P150S/P200E
Vespa 50/90/125/150/160/180/200
Gray color
Vespa 125 VN1>2T
Base gasket for fuel tap for Vespa V50/PV/ET3/125/GT/GTR/Super/TS/150 Sprint/V/Super/180/200 Rally/GS160/SS180/PK50-125/PX80-200/T5
All models except VM1>2T, V30>33T, VB1T
Thickness--> 3mm
Black fuel tap rod gasket for Vespa PX80-200 E Lusso/'98/'MY/T5/'11/LML Star 125-200 4T/Star Deluxe 125-150
Vespa 125 PX VNX2T 53220>
Vespa 150 PX VLX1T 430975>
Vespa 200 PX VSX1T 138247>
Vespa 125 V30T>33T, Vespa 125 VM1T>2T, Vespa 150 VL1T>3T, Vespa 150 GS VS1T>5T, Vespa 150 VB1T
In rubber, grey color.
Vespa 125 V1T>15T
Washer for oil mixer tank fitting Ø 5x26 mm for Vespa 125/150/200 PX/Cosa with mixer
Vespa 125 PX ZAPM74100
Vespa 125 PX Cat ZAPM50100
Vespa 125 PX Millennium VNX1T
Vespa 125 PX Arcobaleno VNX2T
Vespa 125 PX T5 VNX5T
Vespa 150 PX ZAPM74200
Vespa 150 PX Millennium VLX1T '98
Vespa 150 PX Arcobaleno VLX1T
Vespa 180 Rally VSD1T
Vespa 200 PE Arcobaleno VSX1T
Vespa 200 PX Millennium VSX1T
Vespa 200 Rally VSE1T
Fuel tap selector gasket in black Viton for Vespa VS1T 009451> - VS2T - VS3T - VS4T - VS5T.
Vespa 150 GS VS1T 009451>
Vespa 150 GS VS2>5T
Outer diameter: 28mm
Thickness: 3 mm
Vespa 125 PX ZAPM74100
Vespa 125 PX Cat ZAPM50100
Vespa 125 PX Millennium VNX1T
Vespa 125 PX Arcobaleno VNX2T
Vespa 125 PX T5 VNX5T
Vespa 150 PX ZAPM74200
Vespa 150 PX Millennium VLX1T '98
Vespa 150 PX Arcobaleno VLX1T
Vespa 180 Rally VSD1T
Vespa 200 PE Arcobaleno VSX1T
Vespa 200 PX Millennium VSX1T
Vespa 200 Rally VSE1T
Felt gasket for carburetor manifold for Vespa 125 Primavera ET3/PK
Red fuel tap rod gasket for Vespa 50-125 PV/ET3/PK/S/XL/VNA-TS/150 VBA-T4/160 GS/180 SS/Rally/P80-150X/PX80-200E/Lusso 1°/P150S/P200E
Vespa 50
Vespa 90
Vespa 125
Vespa 125 PX VNX2T> 53219
Vespa 150
Vespa 150 PX VLX1T> 430974
Vespa 180
Vespa 200
Vespa 200 PE VSX1T> 138246
Color black
Viton fuel tap selector gasket for Vespa 50/90/125/150/200 N-L-R Primavera-PX-VBB-Sprint-GL
Vespa 50 all models
Vespa 90 all models
Vespa 125 from 1951 all models
Vespa 150 all except 150 GS VS1T 009451>
Vespa 160 all models
Vespa 180 all models
Vespa 200 all models
Note: Resistant to green gasoline
Vespa 50 all models
Vespa 90 all models
Vespa 125 from 1951 all models
Vespa 150 all except 150 GS VS1T 009451>
Vespa 160 all models
Vespa 180 all models
Vespa 200 all models
Note: Resistant to green gasoline
Premium base mixer gasket for Vespa 180-200 PX80-200/PE/Lusso/'98/MY/'11/T5/Cosa
Vespa 125/150 PX
Vespa 125 PX T5 VNX5T
Vespa 125 Cosa
Vespa 150 Cosa
Vespa 200 PE
Mixer base gasket Piaggio for Vespa 180-200 PX80-200/PE/Lusso/'98/MY/'11/T5/Cosa
Vespa 125/150 PX
Vespa 125 PX T5 VNX5T
Vespa 125 Cosa
Vespa 150 Cosa
Vespa 200 PE
Transmission protection tube and green handlebar lights for Vespa 125/150 VM-VN-VL
Vespa 125 V30T>33T
Vespa 125 VM1T>2T
Vespa 125 VN1T>2T
Vespa 150 GS VS1T
Vespa 150 VL1T>3T
Length: 0.5 meters
Transmission protection tube and handlebar lights in gray color for Vespa 125/150 VM-VN-VL
Vespa 125 V30T>33T
Vespa 125 VM1T>2T
Vespa 125 VN1T>2T
Vespa 150 GS VS1T
Vespa 150 VL1T>3T
Length: 1 Meter
Handlebar protection sleeves Ariete with Vespa logo in grey color for Vespa 125 V30>33T-VM1>2T-VN1>2T/150 GS
Vespa 125 from '51 to '57
Vespa 150 GS VS1T
Rubber
46 mm
Gray
Gray handlebar cover protection for Vespa 125 V30>33T-VM1>2T-VN1>2T/150 GS
Vespa 125 V30>33T
Vespa 125 VM1>2T
Vespa 125 VN1T>2T
Vespa 125 U VU1T
Vespa 150 VL1T>3T
Vespa 150 GS VS1T
Vespa 125 V30T > V33T
Vespa 125 VM1T > VM2T
Vespa 125 VN1T > VN2T
Vespa 150 GS VS1T
Vespa 150 VL1T > VL3T (all models with external cables)
In rubber, gray color
Handlebar Sleeve and Protection Kit for Vespa 125 V1-15/V30-33/VM/VN/VU/Hoffmann/ACMA/150 VL/VD/GS VS1
Vespa 125 V30T > V33T
Vespa 125 VM1T > VM2T
Vespa 125 VN1T > VN2T
Vespa 150 GS VS1T
Vespa 150 VL1T > VL3T (all models with external cables)
In rubber, grey color
SIP Handlebar Sleeve and Sheath Protection Kit for Vespa 125 V1-15/V30-33/VM/VN/VU/Hoffmann/ACMA/150 VL/VD/GS VS1
Vespa 125 V30T > V33T
Vespa 125 VM1T > VM2T
Vespa 125 VN1T > VN2T
Vespa 150 GS VS1T
Vespa 150 VL1T > VL3T (all models with external cables)
In rubber, grey color
Black color switch cable grommet for Vespa 125 Cambio bacchetta V1T>15T
Vespa 125 Rod change V1T>15T
Vespa 125 V30>33T
Vespa 125 VM1>2T
Vespa 125 VN1>2T
In raw sheet metal
Optical group stop and adjustment plate for Vespa 50/90/125 Primavera ET3/Super/150 Super
Vespa 50
Vespa 90
Vespa 125 Primavera ET3
Finish: Galvanized
Irreversible gas tube spring for Vespa 50-125/PV/ET3/125 GT/GTR/Super/TS/150 GL/Sprint/V/Super/180 SS/Rally
Vespa 50 V5A1>3T, Vespa 50s V5SA1T, Vespa 50 V5SS1>2T, Vespa 90 V9A1TV9SS1>2T, Vespa 125 VMA1>2T, Vespa 125 Primavera ET3 VMB1T, Vespa 125 Super VNC1T, Vespa 125 GT - GTR - TS, Vespa 150 GL VLA1T, Vespa 150 Super VBC1T, Vespa 150 Sprint VLB1T, Vespa 150 Sprint Vel. VLB1T, Vespa 180 SS VSC1T, Vespa 180 Rally VSD1T, Vespa 200 Rally VSE1T
In harmonic steel
Vespa 50 Special V5A2>T
Vespa 50 Special V5B1>4T
Finish: Burnished
Vespa 100 PK XL V9X2T
Vespa 125 PK XL VMX6T
Vespa 125 PX ZAPM74100
Vespa 125 PX Cat ZAPM50100
Vespa 125 PX Millennium VNX1T
Vespa 125 PX Rainbow VNX2T 200001>
Vespa 150 PX 2011 ZAPM74200
Vespa 150 PX Millennium VLX1T
Vespa 150 Rainbow elestart VLX1T
Vespa 200 PE Millennium VSX1T
Vespa 200 PE Rainbow elestart VSX1T
Vespa 100 PK XL V9X2T
Vespa 125 PK XL VMX6T
Vespa 125 PX ZAPM74100
Vespa 125 PX Cat ZAPM50100
Vespa 125 PX Millennium VNX1T
Vespa 125 PX Arcobaleno VNX2T 200001>
Vespa 150 PX 2011 ZAPM74200
Vespa 150 PX Millennium VLX1T
Vespa 150 Arcobaleno elestart VLX1T
Vespa 200 PE Millennium VSX1T
Vespa 200 PE Arcobaleno elestart VSX1T
Gasket between headlight and frame for Vespa 125 VNL2T/ 150 GL VLA1T/VLB1T>VLB2T /180 SS VSC1T
Vespa 125 GT VNL2T
Vespa 150 GL VLA1T
Vespa 150 Sprint VLB1T
Vespa 180 SS VSC1T
In cream-colored rubber
Gasket for glass and reflector union in cream-colored rubber
Vespa 125 VNB3>6T
Vespa 150 VB1T
Vespa 150 GS VS1>5T
Vespa 150 VBA1T
Vespa 150 VBB1>2T
Vespa 160 GS VSB1T
Ape 125 A1>15T
Ape 150 AB1>4T
Ape 150 AC1>4T
Ape 175
Suitable for optical groups with Diameter 115 mm
Vespa 125 GTR VNL2T
Vespa 125 TS VNL3T
Vespa 150 Sprint Veloce VLB1T
Vespa 180 Rally VSD1T
Vespa 200 Rally VSE1T
Vespa 98/125, V1-15/V30-33
In light gray or white rubber, for diameter of 95 mm.
Vespa 160 GS 1962>64 VSB1T up to chassis 0055506
In rubber, color black
Vespa 125 from '53 to '57
Vespa 125 VM1T > VM2T
Vespa 125 VN1T > VN2T
Ape AB1T > AB4T
In rubber, color grey
Vespa 125 V1>15T
Vespa 125 V30>33T
Vespa 125 VM1>2T
Vespa 125 VN1>2T
Vespa 125 VNA1>2T
Vespa 125 VNB1>2T
Vespa 150 VL1>3T
Ape 150 AB1>4T
For optical groups with a diameter of 105 mm