VMC SILURO SPORT Exhaust for Vespa small frame

The exhaust has been designed and developed to be super performance while maintaining a classic and original look and sound.

It is entirely constructed from stamped steel sheets and assembled
by craftsmen welders with a decade of experience in making
2T exhausts.

The VMC SILURO "SPORT" version has a 32mm diameter exhaust flange and
slotted mounting holes that adapt to cylinders with a stud spacing of 52, 56, and 60mm.

It fits very well with performance cylinders such as the VMC GS series in
Cast Iron, the VMC ET6 and ET7 aluminum cylinders both 135cc and 144cc,
Pinasco Zuera, Quattrini M1 series (M1 56-60, M1-60B, M1L 56-60), the
EGIG 170cc cast iron cylinder, etc.

This exhaust enhances and unleashes the power and torque of the engine
right from low revs with an over-rev that can reach over 10,000 <

VMC SILURO SPORT Exhaust for Vespa small frame

The exhaust has been designed and developed to be super performing while maintaining a classic and original look and sound.

It is entirely constructed from stamped steel sheets and assembled
by artisan welders with decades of experience in making
2T exhausts.

The VMC SILURO "SPORT" version has a 32mm exhaust flange and
slotted mounting holes that adapt to cylinders with a stud
spacing of 52, 56, and 60mm.

It fits very well with high-performance cylinders such as the VMC GS series in
Cast Iron, the aluminum VMC ET6 and ET7 cylinders both 135cc and 144cc,
Pinasco Zuera, Quattrini M1 series (M1 56-60, M1-60B, M1L 56-60), the
EGIG 170cc cast iron cylinder, etc.

This exhaust enhances and unleashes the power and torque of the engine
from low revs with an over-rev that can reach over 10,000

7-port aluminum cylinder, shell moulding technology, bore treated with Nikasil

Bore diameter 60mm, Stroke 51mm, Displacement 144cc, EXHAUST PORT WITH BOOSTERS

Main Transfer Phases 128° Exhaust 188°, exhaust stud spacing 60mm, oval exhaust outlet diameter 32mm

The exhaust can be slightly filed to 36mm to fit our Evo SeiDue and Kifly 62 exhaust pipes

Piston with 2 steel Rik rings, complete with pin and clips.

Die-cast aluminum head with SIDE spark plug and 4 additional fixing screws.

Squish 1.1mm ± 0.1mm. Tightening torque for M7 studs: 11÷12 Nm, Tightening torque for M6 screws 10÷11 Nm

Complete with bolts and cylinder gaskets in various thicknesses.

It is a cylinder suitable for extreme modifications.

Mounted with a VMC Evo 62, it requires a close-ratio gearbox and more generous expansion exhausts like the VMC Kifly 62 to reach powers of around 30hp
<

6-port aluminum cylinder, shell moulding technology, Liner with Nikasil treatment

Bore diameter 60mm Stroke 51mm Displacement 144cc SINGLE PORT EXHAUST

Main Transfer Phases 126° Exhaust 186°, exhaust stud spacing 56mm, exhaust outlet diameter 32mm

Piston with 2 steel Rik rings complete with pin and clips.

Die-cast aluminum head with SIDE spark plug with 4 additional fixing screws.

Squish 1.1mm ± 0.1mm. Tightening of M7 stud nuts: 11÷12 Nm, Tightening of M6 screws 10÷11 Nm

Complete with bolts and paper cylinder gaskets of various thicknesses.

It is a versatile cylinder that is suitable for both mild and more extreme tuning.

With more generous expansion exhausts like the VMC EVO 52, it transforms into a classic 2-stroke racing engine.

Installed with the Vmc Siluro Sport, the cylinder transforms into a fast touring engine with generous torque from low revs and excellent top-end power.

Attention: To

Size--> 2.10-10" with pre-mounted valve
Usable with tires: - 3.00 x 10 - 3.50 x 10 - 90/90-10

Reinforced Flat VMC Cross for Vespa large frame, PX '84, MY, T5, COSA

Made of special steel with corresponding vacuum carburizing treatment with surface hardness of 56/60 HRC

A chamfer has been machined on the corners of the cross ends to preserve the integrity of the gears and the selector


The cross has slightly larger dimensions compared to the original ones which might require small adjustments to be made on the wheel axle before installation.

Made of special steel with related vacuum carburizing treatment with a surface hardness of 56/60 HRC

On the corners of the ends of the crosspiece, a chamfer has been machined to preserve the integrity of the gears and the selector

The crosspiece has slightly larger dimensions compared to the original ones, which may require small adjustments to be made on the wheel axle before assembly.

Size--> 2.10-10" with pre-installed valve
Usable with tires: - 3.00 x 10 - 3.50 x 10 - 90/90-10

CLUSTER FOURTH SHORT
z10-14-18-21
Compatible with:
z58-54-50-46 = Orig.

Included M10x nut