Variable advance 12v 90w
Connections: blue - to ground + to the small terminal of the control unit red/black to the large terminal of the control unit + to ground for shutdown yellow to the voltage regulator

New VMC EVO ignition kit with variable advance for Vespa Smallframe engines, complete with stabilizer and IDM coil

Cooling fan in aluminum with enlarged fin profiles to increase airflow and better cool the thermal unit even in the most demanding conditions

Variable advance 12v 90w
Connections: blue - to ground + to the small spade terminal of the control unit
red/black to the large spade terminal of the control unit + to ground for shutdown
yellow to the voltage regulator

Switch modified for mounting electronic ignitions.

Model with button for setting Sip odometer

Switch modified for mounting electronic ignitions

Weight: 0.2 kg.

Color: Gray

Weight: 0.2 kg.

Color: Yellow

Weight: 0.2 kg.

Color: Carbon Look

Switch modified for mounting electronic ignitions.

Model WITHOUT button for setting Sip odometer

Cone: 20

Weight: 2.3 kg.

12v 90w variable advance
Connections: blue - to ground + to the small terminal of the control unit red/black to the large terminal of the control unit + to ground for shutdown yellow to the voltage regulator

New VMC EVO ignition kit with variable advance for Vespa Smallframe engines, complete with stabilizer and IDM coil

Aluminum cooling fan with enlarged fin profiles to increase airflow and better cool the thermal unit even in the most demanding conditions

Variable advance 12v 90w
Connections: blue - to ground + to the small spade connector of the control unit red/black to the large spade connector of the control unit + to ground for shutdown yellow to the voltage regulator

New VMC EVO ignition kit with variable advance for Vespa Smallframe engines, complete with stabilizer and IDM coil

Aluminum cooling fan with enlarged blade profiles to increase airflow and better cool the thermal unit even in the most demanding conditions

Variable advance 12v 90w
Connections: blue - to ground + to the small spade terminal of the control unit
red/black to the large spade terminal of the control unit + to ground for shutdown
yellow to the voltage regulator

Variable advance 12v 90w
Connections: blue - to ground + to the small spade terminal of the control unit
red/black to the large spade terminal of the control unit + to ground for shutdown
yellow to the voltage regulator

- Weight Kg 1.100
- Cone 20
- Integral flywheel
- Yellow fan
- Variable timing

- Weight Kg 1.100
- Cone 20
- Riveted flywheel
- Grey fan

- Weight Kg 1.100
- Cone 20
- ECV flywheel
- Yellow fan

- Weight Kg 1,100
- Cone 20
- ECV Flywheel
- Carbon Look Fan

- Weight Kg 1.100
- Cone 20
- Integral flywheel
- Grey fan
- Variable timing

- Weight Kg 1.700
- Cone 20
- Integral flywheel
- Yellow fan
- Variable timing

- Weight Kg 1.10
- Cone 20
- Integral flywheel
- Carbon look fan
- Variable timing

- Weight Kg 1,700
- Cone 20
- Integral flywheel
- Carbon look fan
- Variable timing

Cone: 20

Weight: 0.9 kg.

Cone: 20

Weight: 0.9 kg.

Cone: 20

Weight: 1.5 kg.

Flywheel for ignition Vespa ET3-Special-Primavera-PK

Manage multiple maps simultaneously without the need for handheld devices, with a simple click. Allows you to shift the selected map by moving the OFFSET (+ or - 2°).

Malossi ignitions concentrate the maximum technology applied to competitions. The new internal rotor ignitions are born from the need to overcome the technical limitations of the original flywheel-ignition groups, which beyond 10,000 rpm do not guarantee consistent performance, causing significant and sometimes insurmountable tuning problems.

We have made the control unit even more immune to disturbances, developing a microprocessor based on uP STM8 - 8 Bit with superior computing capacity @ 20 MIPS to ensure much higher spark precision compared to the previous version!

The MHR Team II range is equipped with a non-remappable variable advance control unit with 3 trimmers:


the first (MAPS) to determine the selection of the advance map
the second (OFFSET) allows you to shift the selected map + or – 2°
the third (LIM) particularly indicated for 4-stroke engines, allows you to vary the intervention of the

Electronic ignition EVOK with variable advance cone Ø20mm. Thanks to the enlarged cooling fan, the air flow for cooling is 25% higher than the original fan. The rivets applied during the flywheel assembly phase are reinforced and ensure exceptional reliability, the flywheel weights are machined from solid and are perfectly balanced and zinc-plated. Finally, the stator plate features a graduated scale that allows perfect adjustment of the ignition degrees. Each kit is equipped with everything necessary for assembly - Flywheel 1400g - Enlarged cooling fan - 4-pole stator - Graduated stator plate - Ignition coil - Voltage regulator - Flywheel puller 28x1 mm - Coil fixing plate - Spark plug cap - Hardware kit 7 sales plus - Plug and play, everything necessary for assembly is included - Excellent quality and reliability over time - Return and extended warranty up to 24 months - 24-hour Whatsapp hotline for assistance and specific adjustment consultation upon request - Fan color gray as original to avoid issues during revision or historical register registration - Inclination marks for advance adjustment - Rotor about 1.4kg, for +30% extension.

Plate Support for control unit and voltage regulator to be fixed on Vespa small frame engine casing


With this support made of stainless steel, it is possible to
mount the coil and the voltage regulator directly on the Vespa small frame engine casing

EVOK electronic ignition with variable advance cone Ø19mm. Thanks to the enlarged cooling fan, the airflow for cooling is 25% higher than the original fan. The rivets applied during the assembly phase of the flywheel are reinforced and ensure exceptional reliability, the weights of the same are made from solid and are perfectly balanced and zinc-coated. Finally, the stator plate features a graduated scale that allows perfect adjustment of the ignition degrees. Each kit is equipped with everything necessary for installation.

- Flywheel 1400g - Enlarged cooling fan - 4-pole stator - Graduated stator plate - Ignition coil - Voltage regulator - Flywheel extractor 28x1 mm - Coil fixing plate - Spark plug cap - Kit hardware

7 sales plus - Plug and play, everything necessary for installation is included - Excellent quality and long-term reliability - Return and extended warranty up to 24 months - 24-hour WhatsApp toll-free number for assistance and consultation for specific adjustments upon request - Fan color gray as original to avoid issues during revision or historical register registration - Inclination notches for advance registration - Rotor approximately 1.4kg, for +30% extension.